From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Thor Thayer <thor.thayer@linux.intel.com>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 25/27] net: stmmac: Fix RX packet size > 8191
Date: Wed, 14 Nov 2018 17:25:14 -0500 [thread overview]
Message-ID: <20181114222520.99926-25-sashal@kernel.org> (raw)
In-Reply-To: <20181114222520.99926-1-sashal@kernel.org>
From: Thor Thayer <thor.thayer@linux.intel.com>
[ Upstream commit 8137b6ef0ce469154e5cf19f8e7fe04d9a72ac5e ]
Ping problems with packets > 8191 as shown:
PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data.
8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms
wrong data byte 8144 should be 0xd0 but was 0x0
16 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
%< ---------------snip--------------------------------------
8112 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf
c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf
8144 0 0 0 0 d0 d1
^^^^^^^
Notice the 4 bytes of 0 before the expected byte of d0.
Databook notes that the RX buffer must be a multiple of 4/8/16
bytes [1].
Update the DMA Buffer size define to 8188 instead of 8192. Remove
the -1 from the RX buffer size allocations and use the new
DMA Buffer size directly.
[1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a
[section 8.4.2 - Table 8-24]
Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets.
Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)")
Suggested-by: Jose Abreu <jose.abreu@synopsys.com>
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 3 ++-
drivers/net/ethernet/stmicro/stmmac/descs_com.h | 2 +-
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/ring_mode.c | 2 +-
4 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 627fec210e2f..8e2a19616bc9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -340,7 +340,8 @@ struct dma_features {
/* GMAC TX FIFO is 8K, Rx FIFO is 16K */
#define BUF_SIZE_16KiB 16384
-#define BUF_SIZE_8KiB 8192
+/* RX Buffer size must be < 8191 and multiple of 4/8/16 bytes */
+#define BUF_SIZE_8KiB 8188
#define BUF_SIZE_4KiB 4096
#define BUF_SIZE_2KiB 2048
diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
index ca9d7e48034c..40d6356a7e73 100644
--- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
@@ -31,7 +31,7 @@
/* Enhanced descriptors */
static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end)
{
- p->des1 |= cpu_to_le32(((BUF_SIZE_8KiB - 1)
+ p->des1 |= cpu_to_le32((BUF_SIZE_8KiB
<< ERDES1_BUFFER2_SIZE_SHIFT)
& ERDES1_BUFFER2_SIZE_MASK);
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index 2a828a312814..acd65a4f94d4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -262,7 +262,7 @@ static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
int mode, int end)
{
p->des0 |= cpu_to_le32(RDES0_OWN);
- p->des1 |= cpu_to_le32((BUF_SIZE_8KiB - 1) & ERDES1_BUFFER1_SIZE_MASK);
+ p->des1 |= cpu_to_le32(BUF_SIZE_8KiB & ERDES1_BUFFER1_SIZE_MASK);
if (mode == STMMAC_CHAIN_MODE)
ehn_desc_rx_set_on_chain(p);
diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
index 28e4b5d50ce6..1af7b078b94d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
+++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
@@ -143,7 +143,7 @@ static void stmmac_clean_desc3(void *priv_ptr, struct dma_desc *p)
static int stmmac_set_16kib_bfsize(int mtu)
{
int ret = 0;
- if (unlikely(mtu >= BUF_SIZE_8KiB))
+ if (unlikely(mtu > BUF_SIZE_8KiB))
ret = BUF_SIZE_16KiB;
return ret;
}
--
2.17.1
next prev parent reply other threads:[~2018-11-14 22:25 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20181114222520.99926-1-sashal@kernel.org>
2018-11-14 22:24 ` [PATCH AUTOSEL 4.14 02/27] netfilter: ipset: list:set: Decrease refcount synchronously on deletion and replace Sasha Levin
2018-11-14 22:24 ` [PATCH AUTOSEL 4.14 03/27] netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net Sasha Levin
2018-11-14 22:24 ` [PATCH AUTOSEL 4.14 05/27] usbnet: smsc95xx: disable carrier check while suspending Sasha Levin
2018-11-14 22:24 ` [PATCH AUTOSEL 4.14 06/27] net: dsa: microchip: initialize mutex before use Sasha Levin
2018-11-14 22:24 ` [PATCH AUTOSEL 4.14 07/27] net: systemport: Protect stop from timeout Sasha Levin
2018-11-14 22:24 ` [PATCH AUTOSEL 4.14 09/27] netfilter: xt_IDLETIMER: add sysfs filename checking routine Sasha Levin
2018-11-14 22:25 ` [PATCH AUTOSEL 4.14 11/27] mlxsw: spectrum: Fix IP2ME CPU policer configuration Sasha Levin
2018-11-14 22:25 ` [PATCH AUTOSEL 4.14 20/27] i40e: restore NETIF_F_GSO_IPXIP[46] to netdev features Sasha Levin
2018-11-14 22:25 ` [PATCH AUTOSEL 4.14 21/27] ibmvnic: fix accelerated VLAN handling Sasha Levin
2018-11-14 22:25 ` [PATCH AUTOSEL 4.14 22/27] qed: Fix memory/entry leak in qed_init_sp_request() Sasha Levin
2018-11-14 22:25 ` [PATCH AUTOSEL 4.14 23/27] qed: Fix blocking/unlimited SPQ entries leak Sasha Levin
2018-11-14 22:25 ` [PATCH AUTOSEL 4.14 24/27] qed: Fix potential memory corruption Sasha Levin
2018-11-14 22:25 ` Sasha Levin [this message]
2018-11-14 22:25 ` [PATCH AUTOSEL 4.14 26/27] net: smsc95xx: Fix MTU range Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181114222520.99926-25-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=thor.thayer@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).