netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexis Bauvin <abauvin@scaleway.com>
To: dsa@cumulusnetworks.com, roopa@cumulusnetworks.com,
	stephen@networkplumber.org
Cc: netdev@vger.kernel.org, abauvin@scaleway.com, akherbouche@scaleway.com
Subject: [PATCH v6 3/4] vxlan: add support for underlay in non-default VRF
Date: Tue, 27 Nov 2018 14:05:44 +0100	[thread overview]
Message-ID: <20181127130545.54356-4-abauvin@scaleway.com> (raw)
In-Reply-To: <20181127130545.54356-1-abauvin@scaleway.com>

Creating a VXLAN device with is underlay in the non-default VRF makes
egress route lookup fail or incorrect since it will resolve in the
default VRF, and ingress fail because the socket listens in the default
VRF.

This patch binds the underlying UDP tunnel socket to the l3mdev of the
lower device of the VXLAN device. This will listen in the proper VRF and
output traffic from said l3mdev, matching l3mdev routing rules and
looking up the correct routing table.

When the VXLAN device does not have a lower device, or the lower device
is in the default VRF, the socket will not be bound to any interface,
keeping the previous behaviour.

The underlay l3mdev is deduced from the VXLAN lower device
(IFLA_VXLAN_LINK).

+----------+                         +---------+
|          |                         |         |
| vrf-blue |                         | vrf-red |
|          |                         |         |
+----+-----+                         +----+----+
     |                                    |
     |                                    |
+----+-----+                         +----+----+
|          |                         |         |
| br-blue  |                         | br-red  |
|          |                         |         |
+----+-----+                         +---+-+---+
     |                                   | |
     |                             +-----+ +-----+
     |                             |             |
+----+-----+                +------+----+   +----+----+
|          |  lower device  |           |   |         |
|   eth0   | <- - - - - - - | vxlan-red |   | tap-red | (... more taps)
|          |                |           |   |         |
+----------+                +-----------+   +---------+

Signed-off-by: Alexis Bauvin <abauvin@scaleway.com>
Reviewed-by: Amine Kherbouche <akherbouche@scaleway.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Amine Kherbouche <akherbouche@scaleway.com>
---
 drivers/net/vxlan.c | 32 ++++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 27bd586b94b0..8ba0a57ff958 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -212,7 +212,7 @@ static inline struct vxlan_rdst *first_remote_rtnl(struct vxlan_fdb *fdb)
  * and enabled unshareable flags.
  */
 static struct vxlan_sock *vxlan_find_sock(struct net *net, sa_family_t family,
-					  __be16 port, u32 flags)
+					  __be16 port, u32 flags, int ifindex)
 {
 	struct vxlan_sock *vs;
 
@@ -221,7 +221,8 @@ static struct vxlan_sock *vxlan_find_sock(struct net *net, sa_family_t family,
 	hlist_for_each_entry_rcu(vs, vs_head(net, port), hlist) {
 		if (inet_sk(vs->sock->sk)->inet_sport == port &&
 		    vxlan_get_sk_family(vs) == family &&
-		    vs->flags == flags)
+		    vs->flags == flags &&
+		    vs->sock->sk->sk_bound_dev_if == ifindex)
 			return vs;
 	}
 	return NULL;
@@ -261,7 +262,7 @@ static struct vxlan_dev *vxlan_find_vni(struct net *net, int ifindex,
 {
 	struct vxlan_sock *vs;
 
-	vs = vxlan_find_sock(net, family, port, flags);
+	vs = vxlan_find_sock(net, family, port, flags, ifindex);
 	if (!vs)
 		return NULL;
 
@@ -2172,6 +2173,9 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev,
 		struct rtable *rt;
 		__be16 df = 0;
 
+		if (!ifindex)
+			ifindex = sock4->sock->sk->sk_bound_dev_if;
+
 		rt = vxlan_get_route(vxlan, dev, sock4, skb, ifindex, tos,
 				     dst->sin.sin_addr.s_addr,
 				     &local_ip.sin.sin_addr.s_addr,
@@ -2210,6 +2214,9 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev,
 	} else {
 		struct vxlan_sock *sock6 = rcu_dereference(vxlan->vn6_sock);
 
+		if (!ifindex)
+			ifindex = sock6->sock->sk->sk_bound_dev_if;
+
 		ndst = vxlan6_get_route(vxlan, dev, sock6, skb, ifindex, tos,
 					label, &dst->sin6.sin6_addr,
 					&local_ip.sin6.sin6_addr,
@@ -2813,7 +2820,7 @@ static const struct ethtool_ops vxlan_ethtool_ops = {
 };
 
 static struct socket *vxlan_create_sock(struct net *net, bool ipv6,
-					__be16 port, u32 flags)
+					__be16 port, u32 flags, int ifindex)
 {
 	struct socket *sock;
 	struct udp_port_cfg udp_conf;
@@ -2831,6 +2838,7 @@ static struct socket *vxlan_create_sock(struct net *net, bool ipv6,
 	}
 
 	udp_conf.local_udp_port = port;
+	udp_conf.bind_ifindex = ifindex;
 
 	/* Open UDP socket */
 	err = udp_sock_create(net, &udp_conf, &sock);
@@ -2842,7 +2850,8 @@ static struct socket *vxlan_create_sock(struct net *net, bool ipv6,
 
 /* Create new listen socket if needed */
 static struct vxlan_sock *vxlan_socket_create(struct net *net, bool ipv6,
-					      __be16 port, u32 flags)
+					      __be16 port, u32 flags,
+					      int ifindex)
 {
 	struct vxlan_net *vn = net_generic(net, vxlan_net_id);
 	struct vxlan_sock *vs;
@@ -2857,7 +2866,7 @@ static struct vxlan_sock *vxlan_socket_create(struct net *net, bool ipv6,
 	for (h = 0; h < VNI_HASH_SIZE; ++h)
 		INIT_HLIST_HEAD(&vs->vni_list[h]);
 
-	sock = vxlan_create_sock(net, ipv6, port, flags);
+	sock = vxlan_create_sock(net, ipv6, port, flags, ifindex);
 	if (IS_ERR(sock)) {
 		kfree(vs);
 		return ERR_CAST(sock);
@@ -2894,11 +2903,17 @@ static int __vxlan_sock_add(struct vxlan_dev *vxlan, bool ipv6)
 	struct vxlan_net *vn = net_generic(vxlan->net, vxlan_net_id);
 	struct vxlan_sock *vs = NULL;
 	struct vxlan_dev_node *node;
+	int l3mdev_index = 0;
+
+	if (vxlan->cfg.remote_ifindex)
+		l3mdev_index = l3mdev_master_upper_ifindex_by_index(
+			vxlan->net, vxlan->cfg.remote_ifindex);
 
 	if (!vxlan->cfg.no_share) {
 		spin_lock(&vn->sock_lock);
 		vs = vxlan_find_sock(vxlan->net, ipv6 ? AF_INET6 : AF_INET,
-				     vxlan->cfg.dst_port, vxlan->cfg.flags);
+				     vxlan->cfg.dst_port, vxlan->cfg.flags,
+				     l3mdev_index);
 		if (vs && !refcount_inc_not_zero(&vs->refcnt)) {
 			spin_unlock(&vn->sock_lock);
 			return -EBUSY;
@@ -2907,7 +2922,8 @@ static int __vxlan_sock_add(struct vxlan_dev *vxlan, bool ipv6)
 	}
 	if (!vs)
 		vs = vxlan_socket_create(vxlan->net, ipv6,
-					 vxlan->cfg.dst_port, vxlan->cfg.flags);
+					 vxlan->cfg.dst_port, vxlan->cfg.flags,
+					 l3mdev_index);
 	if (IS_ERR(vs))
 		return PTR_ERR(vs);
 #if IS_ENABLED(CONFIG_IPV6)
-- 

  parent reply	other threads:[~2018-11-28  0:03 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-27 13:05 [PATCH v6 0/4] Add VRF support for VXLAN underlay Alexis Bauvin
2018-11-27 13:05 ` [PATCH v6 1/4] udp_tunnel: add config option to bind to a device Alexis Bauvin
2018-11-30 14:31   ` Sabrina Dubroca
2018-12-03  9:14     ` Alexis Bauvin
2018-11-30 21:15   ` David Miller
2018-11-27 13:05 ` [PATCH v6 2/4] l3mdev: add function to retreive upper master Alexis Bauvin
2018-11-27 13:05 ` Alexis Bauvin [this message]
2018-11-27 13:05 ` [PATCH v6 4/4] test/net: Add script for VXLAN underlay in a VRF Alexis Bauvin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181127130545.54356-4-abauvin@scaleway.com \
    --to=abauvin@scaleway.com \
    --cc=akherbouche@scaleway.com \
    --cc=dsa@cumulusnetworks.com \
    --cc=netdev@vger.kernel.org \
    --cc=roopa@cumulusnetworks.com \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).