* bnxt_en: NIC Link is Up, 100 Mbps full duplex - but no data
@ 2018-11-28 15:08 Ondrej Zary
0 siblings, 0 replies; only message in thread
From: Ondrej Zary @ 2018-11-28 15:08 UTC (permalink / raw)
To: Michael Chan; +Cc: netdev, linux-kernel
Hello,
I have a new Dell R740 server with BCM57416:
Ethernet controller [0200]: Broadcom Limited BCM57416 NetXtreme-E 10GBase-T RDMA Ethernet Controller [14e4:16d8] (rev 01)
Subsystem: Broadcom Limited BCM57416 NetXtreme-E Dual-Media 10G RDMA Ethernet Controller [14e4:4160]
When I connect a cable from 100Mbps switch, everything looks good - the link
LED lights up orange, data LED flashes green as when data is sent/received,
this appears in log:
[ 3791.655357] bnxt_en 0000:17:00.0 eno1np0: NIC Link is Up, 100 Mbps full duplex, Flow control: ON - receive & transmit
[ 3791.655361] bnxt_en 0000:17:00.0 eno1np0: EEE is not active
[ 3791.655364] bnxt_en 0000:17:00.0 eno1np0: FEC autoneg off encodings: None
But no data comes in or out. tcpdump shows only outgoing packets and they're
not transmitted in real (not seen by other machines).
It works fine after connecting through a gigabit switch.
Currently running 4.18.0-2-amd64 kernel (Debian testing).
Any ideas?
--
Ondrej Zary
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-11-28 15:08 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-11-28 15:08 bnxt_en: NIC Link is Up, 100 Mbps full duplex - but no data Ondrej Zary
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).