From: Pablo Neira Ayuso <pablo@netfilter.org>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, thomas.lendacky@amd.com,
f.fainelli@gmail.com, ariel.elior@cavium.com,
michael.chan@broadcom.com, santosh@chelsio.com,
madalin.bucur@nxp.com, yisen.zhuang@huawei.com,
salil.mehta@huawei.com, jeffrey.t.kirsher@intel.com,
tariqt@mellanox.com, saeedm@mellanox.com, jiri@mellanox.com,
idosch@mellanox.com, jakub.kicinski@netronome.com,
peppe.cavallaro@st.com, grygorii.strashko@ti.com, andrew@lunn.ch,
vivien.didelot@savoirfairelinux.com, alexandre.torgue@st.com,
joabreu@synopsys.com, linux-net-drivers@solarflare.com,
ganeshgr@chelsio.com, ogerlitz@mellanox.com,
Manish.Chopra@cavium.com, marcelo.leitner@gmail.com
Subject: [PATCH net-next,v4 09/12] ethtool: add basic ethtool_rx_flow_spec to flow_rule structure translator
Date: Thu, 29 Nov 2018 03:22:28 +0100 [thread overview]
Message-ID: <20181129022231.2740-10-pablo@netfilter.org> (raw)
In-Reply-To: <20181129022231.2740-1-pablo@netfilter.org>
This patch adds a function to translate the ethtool_rx_flow_spec
structure to the flow_rule representation.
This allows us to reuse code from the driver side given that both flower
and ethtool_rx_flow interfaces use the same representation.
This patch also includes support for FLOW_EXT and FLOW_MAC_EXT.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
v4: Rename to ethtool_rx_flow_rule_create() and ethtool_rx_flow_rule_destroy(),
requested by Jiri Pirko.
Add support for FLOW_EXT and FLOW_MAC_EXT, by Florian Fainelli.
Use BIT() to set .use_keys, also by Florian Fainelli.
Double-check mask field is set when value field is present in
ethtool_rx_flow_rule, requested by Florian Fainelli.
include/linux/ethtool.h | 10 ++
net/core/ethtool.c | 237 ++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 247 insertions(+)
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index afd9596ce636..c76d1b34c9a2 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -400,4 +400,14 @@ struct ethtool_ops {
void (*get_ethtool_phy_stats)(struct net_device *,
struct ethtool_stats *, u64 *);
};
+
+struct ethtool_rx_flow_rule {
+ struct flow_rule *rule;
+ unsigned long priv[0];
+};
+
+struct ethtool_rx_flow_rule *
+ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec *fs);
+void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule *rule);
+
#endif /* _LINUX_ETHTOOL_H */
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index d05402868575..d25f48acac57 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -28,6 +28,7 @@
#include <linux/sched/signal.h>
#include <linux/net.h>
#include <net/xdp_sock.h>
+#include <net/flow_offload.h>
/*
* Some useful ethtool_ops methods that're device independent.
@@ -2808,3 +2809,239 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
return rc;
}
+
+struct ethtool_rx_flow_key {
+ struct flow_dissector_key_basic basic;
+ union {
+ struct flow_dissector_key_ipv4_addrs ipv4;
+ struct flow_dissector_key_ipv6_addrs ipv6;
+ };
+ struct flow_dissector_key_ports tp;
+ struct flow_dissector_key_ip ip;
+ struct flow_dissector_key_vlan vlan;
+ struct flow_dissector_key_eth_addrs eth_addrs;
+} __aligned(BITS_PER_LONG / 8); /* Ensure that we can do comparisons as longs. */
+
+struct ethtool_rx_flow_match {
+ struct flow_dissector dissector;
+ struct ethtool_rx_flow_key key;
+ struct ethtool_rx_flow_key mask;
+};
+
+struct ethtool_rx_flow_rule *
+ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec *fs)
+{
+ static struct in6_addr zero_addr = {};
+ struct ethtool_rx_flow_match *match;
+ struct ethtool_rx_flow_rule *flow;
+ struct flow_action_entry *act;
+
+ flow = kzalloc(sizeof(struct ethtool_rx_flow_rule) +
+ sizeof(struct ethtool_rx_flow_match), GFP_KERNEL);
+ if (!flow)
+ return ERR_PTR(-ENOMEM);
+
+ /* ethtool_rx supports only one single action per rule. */
+ flow->rule = flow_rule_alloc(1);
+ if (!flow->rule) {
+ kfree(flow);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ match = (struct ethtool_rx_flow_match *)flow->priv;
+ flow->rule->match.dissector = &match->dissector;
+ flow->rule->match.mask = &match->mask;
+ flow->rule->match.key = &match->key;
+
+ match->mask.basic.n_proto = htons(0xffff);
+
+ switch (fs->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) {
+ case TCP_V4_FLOW:
+ case UDP_V4_FLOW: {
+ const struct ethtool_tcpip4_spec *v4_spec, *v4_m_spec;
+
+ match->key.basic.n_proto = htons(ETH_P_IP);
+
+ v4_spec = &fs->h_u.tcp_ip4_spec;
+ v4_m_spec = &fs->m_u.tcp_ip4_spec;
+
+ if (v4_m_spec->ip4src) {
+ match->key.ipv4.src = v4_spec->ip4src;
+ match->mask.ipv4.src = v4_m_spec->ip4src;
+ }
+ if (v4_m_spec->ip4dst) {
+ match->key.ipv4.dst = v4_spec->ip4dst;
+ match->mask.ipv4.dst = v4_m_spec->ip4dst;
+ }
+ if (v4_m_spec->ip4src ||
+ v4_m_spec->ip4dst) {
+ match->dissector.used_keys |=
+ BIT(FLOW_DISSECTOR_KEY_IPV4_ADDRS);
+ match->dissector.offset[FLOW_DISSECTOR_KEY_IPV4_ADDRS] =
+ offsetof(struct ethtool_rx_flow_key, ipv4);
+ }
+ if (v4_m_spec->psrc) {
+ match->key.tp.src = v4_spec->psrc;
+ match->mask.tp.src = v4_m_spec->psrc;
+ }
+ if (v4_m_spec->pdst) {
+ match->key.tp.dst = v4_spec->pdst;
+ match->mask.tp.dst = v4_m_spec->pdst;
+ }
+ if (v4_m_spec->psrc ||
+ v4_m_spec->pdst) {
+ match->dissector.used_keys |=
+ BIT(FLOW_DISSECTOR_KEY_PORTS);
+ match->dissector.offset[FLOW_DISSECTOR_KEY_PORTS] =
+ offsetof(struct ethtool_rx_flow_key, tp);
+ }
+ if (v4_m_spec->tos) {
+ match->key.ip.tos = v4_spec->tos;
+ match->mask.ip.tos = v4_m_spec->tos;
+ match->dissector.used_keys |=
+ BIT(FLOW_DISSECTOR_KEY_IP);
+ match->dissector.offset[FLOW_DISSECTOR_KEY_IP] =
+ offsetof(struct ethtool_rx_flow_key, ip);
+ }
+ }
+ break;
+ case TCP_V6_FLOW:
+ case UDP_V6_FLOW: {
+ const struct ethtool_tcpip6_spec *v6_spec, *v6_m_spec;
+
+ match->key.basic.n_proto = htons(ETH_P_IPV6);
+
+ v6_spec = &fs->h_u.tcp_ip6_spec;
+ v6_m_spec = &fs->m_u.tcp_ip6_spec;
+ if (memcmp(v6_m_spec->ip6src, &zero_addr, sizeof(zero_addr))) {
+ memcpy(&match->key.ipv6.src, v6_spec->ip6src,
+ sizeof(match->key.ipv6.src));
+ memcpy(&match->mask.ipv6.src, v6_m_spec->ip6src,
+ sizeof(match->mask.ipv6.src));
+ }
+ if (memcmp(v6_m_spec->ip6dst, &zero_addr, sizeof(zero_addr))) {
+ memcpy(&match->key.ipv6.dst, v6_spec->ip6dst,
+ sizeof(match->key.ipv6.dst));
+ memcpy(&match->mask.ipv6.dst, v6_m_spec->ip6dst,
+ sizeof(match->mask.ipv6.dst));
+ }
+ if (memcmp(v6_m_spec->ip6src, &zero_addr, sizeof(zero_addr)) ||
+ memcmp(v6_m_spec->ip6src, &zero_addr, sizeof(zero_addr))) {
+ match->dissector.used_keys |=
+ BIT(FLOW_DISSECTOR_KEY_IPV6_ADDRS);
+ match->dissector.offset[FLOW_DISSECTOR_KEY_IPV6_ADDRS] =
+ offsetof(struct ethtool_rx_flow_key, ipv6);
+ }
+ if (v6_m_spec->psrc) {
+ match->key.tp.src = v6_spec->psrc;
+ match->mask.tp.src = v6_m_spec->psrc;
+ }
+ if (v6_m_spec->pdst) {
+ match->key.tp.dst = v6_spec->pdst;
+ match->mask.tp.dst = v6_m_spec->pdst;
+ }
+ if (v6_m_spec->psrc ||
+ v6_m_spec->pdst) {
+ match->dissector.used_keys |=
+ BIT(FLOW_DISSECTOR_KEY_PORTS);
+ match->dissector.offset[FLOW_DISSECTOR_KEY_PORTS] =
+ offsetof(struct ethtool_rx_flow_key, tp);
+ }
+ if (v6_m_spec->tclass) {
+ match->key.ip.tos = v6_spec->tclass;
+ match->mask.ip.tos = v6_m_spec->tclass;
+ match->dissector.used_keys |=
+ BIT(FLOW_DISSECTOR_KEY_IP);
+ match->dissector.offset[FLOW_DISSECTOR_KEY_IP] =
+ offsetof(struct ethtool_rx_flow_key, ip);
+ }
+ }
+ break;
+ default:
+ ethtool_rx_flow_rule_destroy(flow);
+ return ERR_PTR(-EINVAL);
+ }
+
+ switch (fs->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) {
+ case TCP_V4_FLOW:
+ case TCP_V6_FLOW:
+ match->key.basic.ip_proto = IPPROTO_TCP;
+ break;
+ case UDP_V4_FLOW:
+ case UDP_V6_FLOW:
+ match->key.basic.ip_proto = IPPROTO_UDP;
+ break;
+ }
+ match->mask.basic.ip_proto = 0xff;
+
+ match->dissector.used_keys |= BIT(FLOW_DISSECTOR_KEY_BASIC);
+ match->dissector.offset[FLOW_DISSECTOR_KEY_BASIC] =
+ offsetof(struct ethtool_rx_flow_key, basic);
+
+ if (fs->flow_type & FLOW_EXT) {
+ const struct ethtool_flow_ext *ext_h_spec = &fs->h_ext;
+ const struct ethtool_flow_ext *ext_m_spec = &fs->m_ext;
+
+ if (ext_m_spec->vlan_etype &&
+ ext_m_spec->vlan_tci) {
+ match->key.vlan.vlan_tpid = ext_h_spec->vlan_etype;
+ match->mask.vlan.vlan_tpid = ext_m_spec->vlan_etype;
+
+ match->key.vlan.vlan_id =
+ ntohs(ext_h_spec->vlan_tci) & 0x0fff;
+ match->mask.vlan.vlan_id =
+ ntohs(ext_m_spec->vlan_tci) & 0x0fff;
+
+ match->key.vlan.vlan_priority =
+ (ntohs(ext_h_spec->vlan_tci) & 0xe000) >> 13;
+ match->mask.vlan.vlan_priority =
+ (ntohs(ext_m_spec->vlan_tci) & 0xe000) >> 13;
+
+ match->dissector.used_keys |=
+ BIT(FLOW_DISSECTOR_KEY_VLAN);
+ match->dissector.offset[FLOW_DISSECTOR_KEY_VLAN] =
+ offsetof(struct ethtool_rx_flow_key, vlan);
+ }
+ }
+ if (fs->flow_type & FLOW_MAC_EXT) {
+ const struct ethtool_flow_ext *ext_h_spec = &fs->h_ext;
+ const struct ethtool_flow_ext *ext_m_spec = &fs->m_ext;
+
+ if (ext_m_spec->h_dest) {
+ memcpy(match->key.eth_addrs.dst, ext_h_spec->h_dest,
+ ETH_ALEN);
+ memcpy(match->mask.eth_addrs.dst, ext_m_spec->h_dest,
+ ETH_ALEN);
+
+ match->dissector.used_keys |=
+ BIT(FLOW_DISSECTOR_KEY_ETH_ADDRS);
+ match->dissector.offset[FLOW_DISSECTOR_KEY_ETH_ADDRS] =
+ offsetof(struct ethtool_rx_flow_key, eth_addrs);
+
+ }
+ }
+
+ act = &flow->rule->action.entries[0];
+ switch (fs->ring_cookie) {
+ case RX_CLS_FLOW_DISC:
+ act->id = FLOW_ACTION_DROP;
+ break;
+ case RX_CLS_FLOW_WAKE:
+ act->id = FLOW_ACTION_WAKE;
+ break;
+ default:
+ act->id = FLOW_ACTION_QUEUE;
+ act->queue_index = fs->ring_cookie;
+ break;
+ }
+
+ return flow;
+}
+EXPORT_SYMBOL(ethtool_rx_flow_rule_create);
+
+void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule *flow)
+{
+ kfree(flow->rule);
+ kfree(flow);
+}
+EXPORT_SYMBOL(ethtool_rx_flow_rule_destroy);
--
2.11.0
next prev parent reply other threads:[~2018-11-29 13:26 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-29 2:22 [PATCH net-next,v4 00/12] add flow_rule infrastructure Pablo Neira Ayuso
2018-11-29 2:22 ` [PATCH net-next,v4 01/12] flow_offload: add flow_rule and flow_match structures and use them Pablo Neira Ayuso
2018-11-29 2:22 ` [PATCH net-next,v4 02/12] net/mlx5e: support for two independent packet edit actions Pablo Neira Ayuso
2018-11-29 2:22 ` [PATCH net-next,v4 03/12] flow_offload: add flow action infrastructure Pablo Neira Ayuso
2018-11-29 2:22 ` [PATCH net-next,v4 04/12] cls_api: add translator to flow_action representation Pablo Neira Ayuso
2018-11-29 2:22 ` [PATCH net-next,v4 05/12] flow_offload: add statistics retrieval infrastructure and use it Pablo Neira Ayuso
2018-11-29 14:06 ` Venkat Duvvuru
2018-11-29 20:48 ` Jakub Kicinski
2018-12-01 9:55 ` Pablo Neira Ayuso
2018-11-29 2:22 ` [PATCH net-next,v4 06/12] drivers: net: use flow action infrastructure Pablo Neira Ayuso
2018-11-29 2:22 ` [PATCH net-next,v4 07/12] cls_flower: don't expose TC actions to drivers anymore Pablo Neira Ayuso
2018-11-29 2:22 ` [PATCH net-next,v4 08/12] flow_offload: add wake-up-on-lan and queue to flow_action Pablo Neira Ayuso
2018-11-29 2:22 ` Pablo Neira Ayuso [this message]
2018-11-29 13:12 ` [PATCH net-next,v4 09/12] ethtool: add basic ethtool_rx_flow_spec to flow_rule structure translator Michal Kubecek
[not found] ` <20181205131037.gznwi35tkz7pxmge@salvia>
2018-12-05 13:56 ` Michal Kubecek
2018-11-29 2:22 ` [PATCH net-next,v4 10/12] dsa: bcm_sf2: use flow_rule infrastructure Pablo Neira Ayuso
2018-11-29 2:22 ` [PATCH net-next,v4 11/12] qede: place ethtool_rx_flow_spec after code after TC flower codebase Pablo Neira Ayuso
2018-11-29 2:22 ` [PATCH net-next,v4 12/12] qede: use ethtool_rx_flow_rule() to remove duplicated parser code Pablo Neira Ayuso
2018-12-01 16:19 ` kbuild test robot
2018-11-29 15:47 ` [PATCH net-next,v4 00/12] add flow_rule infrastructure John Fastabend
2018-11-29 16:53 ` Jiri Pirko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181129022231.2740-10-pablo@netfilter.org \
--to=pablo@netfilter.org \
--cc=Manish.Chopra@cavium.com \
--cc=alexandre.torgue@st.com \
--cc=andrew@lunn.ch \
--cc=ariel.elior@cavium.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=ganeshgr@chelsio.com \
--cc=grygorii.strashko@ti.com \
--cc=idosch@mellanox.com \
--cc=jakub.kicinski@netronome.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jiri@mellanox.com \
--cc=joabreu@synopsys.com \
--cc=linux-net-drivers@solarflare.com \
--cc=madalin.bucur@nxp.com \
--cc=marcelo.leitner@gmail.com \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=ogerlitz@mellanox.com \
--cc=peppe.cavallaro@st.com \
--cc=saeedm@mellanox.com \
--cc=salil.mehta@huawei.com \
--cc=santosh@chelsio.com \
--cc=tariqt@mellanox.com \
--cc=thomas.lendacky@amd.com \
--cc=vivien.didelot@savoirfairelinux.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).