[PATCH AUTOSEL 4.14 03/35] brcmutil: really fix decoding channel info for 160 MHz bandwidth

[PATCH AUTOSEL 4.14 03/35] brcmutil: really fix decoding channel info for 160 MHz bandwidth

[Sasha Levin]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 3401d42c7ea2d064d15c66698ff8eb96553179ce ]

Previous commit /adding/ support for 160 MHz chanspecs was incomplete.
It didn't set bandwidth info and didn't extract control channel info. As
the result it was also using uninitialized "sb" var.

This change has been tested for two chanspecs found to be reported by
some devices/firmwares:
1) 60/160 (0xee32)
   Before: chnum:50 control_ch_num:36
    After: chnum:50 control_ch_num:60
2) 120/160 (0xed72)
   Before: chnum:114 control_ch_num:100
    After: chnum:114 control_ch_num:120

Fixes: 330994e8e8ec ("brcmfmac: fix for proper support of 160MHz bandwidth")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
index e7584b842dce..eb5db94f5745 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
@@ -193,6 +193,9 @@ static void brcmu_d11ac_decchspec(struct brcmu_chan *ch)
 		}
 		break;
 	case BRCMU_CHSPEC_D11AC_BW_160:
+		ch->bw = BRCMU_CHAN_BW_160;
+		ch->sb = brcmu_maskget16(ch->chspec, BRCMU_CHSPEC_D11AC_SB_MASK,
+					 BRCMU_CHSPEC_D11AC_SB_SHIFT);
 		switch (ch->sb) {
 		case BRCMU_CHAN_SB_LLL:
 			ch->control_ch_num -= CH_70MHZ_APART;
-- 
2.17.1

[PATCH AUTOSEL 4.14 05/35] can: rcar_can: Fix erroneous registration

[Sasha Levin]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

[ Upstream commit 68c8d209cd4337da4fa04c672f0b62bb735969bc ]

Assigning 2 to "renesas,can-clock-select" tricks the driver into
registering the CAN interface, even though we don't want that.
This patch improves one of the checks to prevent that from happening.

Fixes: 862e2b6af9413b43 ("can: rcar_can: support all input clocks")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/rcar/rcar_can.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 11662f479e76..771a46083739 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -24,6 +24,9 @@
 
 #define RCAR_CAN_DRV_NAME	"rcar_can"
 
+#define RCAR_SUPPORTED_CLOCKS	(BIT(CLKR_CLKP1) | BIT(CLKR_CLKP2) | \
+				 BIT(CLKR_CLKEXT))
+
 /* Mailbox configuration:
  * mailbox 60 - 63 - Rx FIFO mailboxes
  * mailbox 56 - 59 - Tx FIFO mailboxes
@@ -789,7 +792,7 @@ static int rcar_can_probe(struct platform_device *pdev)
 		goto fail_clk;
 	}
 
-	if (clock_select >= ARRAY_SIZE(clock_names)) {
+	if (!(BIT(clock_select) & RCAR_SUPPORTED_CLOCKS)) {
 		err = -EINVAL;
 		dev_err(&pdev->dev, "invalid CAN clock selected\n");
 		goto fail_clk;
-- 
2.17.1

[PATCH AUTOSEL 4.14 08/35] batman-adv: Use explicit tvlv padding for ELP packets

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit f4156f9656feac21f4de712fac94fae964c5d402 ]

The announcement messages of batman-adv COMPAT_VERSION 15 have the
possibility to announce additional information via a dynamic TVLV part.
This part is optional for the ELP packets and currently not parsed by the
Linux implementation. Still out-of-tree versions are using it to transport
things like neighbor hashes to optimize the rebroadcast behavior.

Since the ELP broadcast packets are smaller than the minimal ethernet
packet, it often has to be padded. This is often done (as specified in
RFC894) with octets of zero and thus work perfectly fine with the TVLV
part (making it a zero length and thus empty). But not all ethernet
compatible hardware seems to follow this advice. To avoid ambiguous
situations when parsing the TVLV header, just force the 4 bytes (TVLV
length + padding) after the required ELP header to zero.

Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_v_elp.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index e92dfedccc16..fbc132f4670e 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -338,19 +338,21 @@ static void batadv_v_elp_periodic_work(struct work_struct *work)
  */
 int batadv_v_elp_iface_enable(struct batadv_hard_iface *hard_iface)
 {
+	static const size_t tvlv_padding = sizeof(__be32);
 	struct batadv_elp_packet *elp_packet;
 	unsigned char *elp_buff;
 	u32 random_seqno;
 	size_t size;
 	int res = -ENOMEM;
 
-	size = ETH_HLEN + NET_IP_ALIGN + BATADV_ELP_HLEN;
+	size = ETH_HLEN + NET_IP_ALIGN + BATADV_ELP_HLEN + tvlv_padding;
 	hard_iface->bat_v.elp_skb = dev_alloc_skb(size);
 	if (!hard_iface->bat_v.elp_skb)
 		goto out;
 
 	skb_reserve(hard_iface->bat_v.elp_skb, ETH_HLEN + NET_IP_ALIGN);
-	elp_buff = skb_put_zero(hard_iface->bat_v.elp_skb, BATADV_ELP_HLEN);
+	elp_buff = skb_put_zero(hard_iface->bat_v.elp_skb,
+				BATADV_ELP_HLEN + tvlv_padding);
 	elp_packet = (struct batadv_elp_packet *)elp_buff;
 
 	elp_packet->packet_type = BATADV_ELP;
-- 
2.17.1

[PATCH AUTOSEL 4.14 09/35] batman-adv: Expand merged fragment buffer for full packet

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit d7d8bbb40a5b1f682ee6589e212934f4c6b8ad60 ]

The complete size ("total_size") of the fragmented packet is stored in the
fragment header and in the size of the fragment chain. When the fragments
are ready for merge, the skbuff's tail of the first fragment is expanded to
have enough room after the data pointer for at least total_size. This means
that it gets expanded by total_size - first_skb->len.

But this is ignoring the fact that after expanding the buffer, the fragment
header is pulled by from this buffer. Assuming that the tailroom of the
buffer was already 0, the buffer after the data pointer of the skbuff is
now only total_size - len(fragment_header) large. When the merge function
is then processing the remaining fragments, the code to copy the data over
to the merged skbuff will cause an skb_over_panic when it tries to actually
put enough data to fill the total_size bytes of the packet.

The size of the skb_pull must therefore also be taken into account when the
buffer's tailroom is expanded.

Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge")
Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Co-authored-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/fragmentation.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c
index b6abd19ab23e..c6d37d22bd12 100644
--- a/net/batman-adv/fragmentation.c
+++ b/net/batman-adv/fragmentation.c
@@ -274,7 +274,7 @@ batadv_frag_merge_packets(struct hlist_head *chain)
 	kfree(entry);
 
 	packet = (struct batadv_frag_packet *)skb_out->data;
-	size = ntohs(packet->total_size);
+	size = ntohs(packet->total_size) + hdr_size;
 
 	/* Make room for the rest of the fragments. */
 	if (pskb_expand_head(skb_out, 0, size - skb_out->len, GFP_ATOMIC) < 0) {
-- 
2.17.1

[PATCH AUTOSEL 4.14 11/35] bnx2x: Assign unique DMAE channel number for FW DMAE transactions.

[Sasha Levin]

From: Sudarsana Reddy Kalluru <sudarsana.kalluru@cavium.com>

[ Upstream commit 77e461d14ed141253573eeeb4d34eccc51e38328 ]

Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW
uses this channel for DMAE operations (e.g., TIME_SYNC implementation).
Driver also uses the same channel 0 for DMAE operations for some of the PFs
(e.g., PF0 on Port0). This could lead to concurrent access to the DMAE
channel by FW and driver which is not legal. Hence need to assign unique
DMAE id for FW.
Currently following DMAE channels are used by the clients,
  MFW - OCBB/OCSD functionality uses DMAE channel 14/15
  Driver 0-3 and 8-11 (for PF dmae operations)
         4 and 12 (for stats requests)
Assigning unique dmae_id '13' to the FW.

Changes from previous version:
------------------------------
v2: Incorporated the review comments.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h    | 7 +++++++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 1 +
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 828e2e56b75e..1b7f4342dab9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2187,6 +2187,13 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
 #define PMF_DMAE_C(bp)			(BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
 					 E1HVN_MAX)
 
+/* Following is the DMAE channel number allocation for the clients.
+ *   MFW: OCBB/OCSD implementations use DMAE channels 14/15 respectively.
+ *   Driver: 0-3 and 8-11 (for PF dmae operations)
+ *           4 and 12 (for stats requests)
+ */
+#define BNX2X_FW_DMAE_C                 13 /* Channel for FW DMAE operations */
+
 /* PCIE link and speed */
 #define PCICFG_LINK_WIDTH		0x1f00000
 #define PCICFG_LINK_WIDTH_SHIFT		20
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index 8baf9d3eb4b1..453bfd83a070 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -6149,6 +6149,7 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
 	rdata->sd_vlan_tag	= cpu_to_le16(start_params->sd_vlan_tag);
 	rdata->path_id		= BP_PATH(bp);
 	rdata->network_cos_mode	= start_params->network_cos_mode;
+	rdata->dmae_cmd_id	= BNX2X_FW_DMAE_C;
 
 	rdata->vxlan_dst_port	= cpu_to_le16(start_params->vxlan_dst_port);
 	rdata->geneve_dst_port	= cpu_to_le16(start_params->geneve_dst_port);
-- 
2.17.1

[PATCH AUTOSEL 4.14 12/35] qed: Fix PTT leak in qed_drain()

[Sasha Levin]

From: Denis Bolotin <denis.bolotin@cavium.com>

[ Upstream commit 9aaa4e8ba12972d674caeefbc5f88d83235dd697 ]

Release PTT before entering error flow.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 954f7ce4cf28..ecc2d4296526 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1561,9 +1561,9 @@ static int qed_drain(struct qed_dev *cdev)
 			return -EBUSY;
 		}
 		rc = qed_mcp_drain(hwfn, ptt);
+		qed_ptt_release(hwfn, ptt);
 		if (rc)
 			return rc;
-		qed_ptt_release(hwfn, ptt);
 	}
 
 	return 0;
-- 
2.17.1

[PATCH AUTOSEL 4.14 13/35] qed: Fix reading wrong value in loop condition

[Sasha Levin]

From: Denis Bolotin <denis.bolotin@cavium.com>

[ Upstream commit ed4eac20dcffdad47709422e0cb925981b056668 ]

The value of "sb_index" is written by the hardware. Reading its value and
writing it to "index" must finish before checking the loop condition.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_int.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index 719cdbfe1695..7746417130bd 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -992,6 +992,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn)
 	 */
 	do {
 		index = p_sb_attn->sb_index;
+		/* finish reading index before the loop condition */
+		dma_rmb();
 		attn_bits = le32_to_cpu(p_sb_attn->atten_bits);
 		attn_acks = le32_to_cpu(p_sb_attn->atten_ack);
 	} while (index != p_sb_attn->sb_index);
-- 
2.17.1

[PATCH AUTOSEL 4.14 15/35] net/mlx4_core: Zero out lkey field in SW2HW_MPT fw command

[Sasha Levin]

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

[ Upstream commit bd85fbc2038a1bbe84990b23ff69b6fc81a32b2c ]

When re-registering a user mr, the mpt information for the
existing mr when running SRIOV is obtained via the QUERY_MPT
fw command. The returned information includes the mpt's lkey.

This retrieved mpt information is used to move the mpt back
to hardware ownership in the rereg flow (via the SW2HW_MPT
fw command when running SRIOV).

The fw API spec states that for SW2HW_MPT, the lkey field
must be zero. Any ConnectX-3 PF driver which checks for strict spec
adherence will return failure for SW2HW_MPT if the lkey field is not
zero (although the fw in practice ignores this field for SW2HW_MPT).

Thus, in order to conform to the fw API spec, set the lkey field to zero
before invoking SW2HW_MPT when running SRIOV.

Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/mr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c
index c7c0764991c9..20043f82c1d8 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
@@ -363,6 +363,7 @@ int mlx4_mr_hw_write_mpt(struct mlx4_dev *dev, struct mlx4_mr *mmr,
 			container_of((void *)mpt_entry, struct mlx4_cmd_mailbox,
 				     buf);
 
+		(*mpt_entry)->lkey = 0;
 		err = mlx4_SW2HW_MPT(dev, mailbox, key);
 	}
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 16/35] net/mlx4_core: Fix uninitialized variable compilation warning

[Sasha Levin]

From: Tariq Toukan <tariqt@mellanox.com>

[ Upstream commit 3ea7e7ea53c9f6ee41cb69a29c375fe9dd9a56a7 ]

Initialize the uid variable to zero to avoid the compilation warning.

Fixes: 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/alloc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/alloc.c b/drivers/net/ethernet/mellanox/mlx4/alloc.c
index 6dabd983e7e0..94f4dc4a77e9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/alloc.c
+++ b/drivers/net/ethernet/mellanox/mlx4/alloc.c
@@ -337,7 +337,7 @@ void mlx4_zone_allocator_destroy(struct mlx4_zone_allocator *zone_alloc)
 static u32 __mlx4_alloc_from_zone(struct mlx4_zone_entry *zone, int count,
 				  int align, u32 skip_mask, u32 *puid)
 {
-	u32 uid;
+	u32 uid = 0;
 	u32 res;
 	struct mlx4_zone_allocator *zone_alloc = zone->allocator;
 	struct mlx4_zone_entry *curr_node;
-- 
2.17.1

[PATCH AUTOSEL 4.14 17/35] net/mlx4: Fix UBSAN warning of signed integer overflow

[Sasha Levin]

From: Aya Levin <ayal@mellanox.com>

[ Upstream commit a463146e67c848cbab5ce706d6528281b7cded08 ]

UBSAN: Undefined behavior in
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29
signed integer overflow: 1802201963 + 1802201963 cannot be represented
in type 'int'

The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors
granting of reserved resources. The grant operation is calculated and
protected, thus both members of the union cannot be negative.  Changed
type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed
int to unsigned int, allowing large value.

Fixes: 5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/mlx4.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index c68da1986e51..aaeb446bba62 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -541,8 +541,8 @@ struct slave_list {
 struct resource_allocator {
 	spinlock_t alloc_lock; /* protect quotas */
 	union {
-		int res_reserved;
-		int res_port_rsvd[MLX4_MAX_PORTS];
+		unsigned int res_reserved;
+		unsigned int res_port_rsvd[MLX4_MAX_PORTS];
 	};
 	union {
 		int res_free;
-- 
2.17.1

[PATCH AUTOSEL 4.14 23/35] qed: Fix bitmap_weight() check

[Sasha Levin]

From: Denis Bolotin <denis.bolotin@cavium.com>

[ Upstream commit 276d43f0ae963312c0cd0e2b9a85fd11ac65dfcc ]

Fix the condition which verifies that only one flag is set. The API
bitmap_weight() should receive size in bits instead of bytes.

Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index ef2374699726..a51cd1028ecb 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -440,8 +440,11 @@ static u16 *qed_init_qm_get_idx_from_flags(struct qed_hwfn *p_hwfn,
 	struct qed_qm_info *qm_info = &p_hwfn->qm_info;
 
 	/* Can't have multiple flags set here */
-	if (bitmap_weight((unsigned long *)&pq_flags, sizeof(pq_flags)) > 1)
+	if (bitmap_weight((unsigned long *)&pq_flags,
+			  sizeof(pq_flags) * BITS_PER_BYTE) > 1) {
+		DP_ERR(p_hwfn, "requested multiple pq flags 0x%x\n", pq_flags);
 		goto err;
+	}
 
 	switch (pq_flags) {
 	case PQ_FLAGS_RLS:
-- 
2.17.1

[PATCH AUTOSEL 4.14 24/35] qed: Fix QM getters to always return a valid pq

[Sasha Levin]

From: Denis Bolotin <denis.bolotin@cavium.com>

[ Upstream commit eb62cca9bee842e5b23bd0ddfb1f271ca95e8759 ]

The getter callers doesn't know the valid Physical Queues (PQ) values.
This patch makes sure that a valid PQ will always be returned.

The patch consists of 3 fixes:

 - When qed_init_qm_get_idx_from_flags() receives a disabled flag, it
   returned PQ 0, which can potentially be another function's pq. Verify
   that flag is enabled, otherwise return default start_pq.

 - When qed_init_qm_get_idx_from_flags() receives an unknown flag, it
   returned NULL and could lead to a segmentation fault. Return default
   start_pq instead.

 - A modulo operation was added to MCOS/VFS PQ getters to make sure the
   PQ returned is in range of the required flag.

Fixes: b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c | 24 +++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index a51cd1028ecb..16953c4ebd71 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -446,6 +446,11 @@ static u16 *qed_init_qm_get_idx_from_flags(struct qed_hwfn *p_hwfn,
 		goto err;
 	}
 
+	if (!(qed_get_pq_flags(p_hwfn) & pq_flags)) {
+		DP_ERR(p_hwfn, "pq flag 0x%x is not set\n", pq_flags);
+		goto err;
+	}
+
 	switch (pq_flags) {
 	case PQ_FLAGS_RLS:
 		return &qm_info->first_rl_pq;
@@ -468,8 +473,7 @@ static u16 *qed_init_qm_get_idx_from_flags(struct qed_hwfn *p_hwfn,
 	}
 
 err:
-	DP_ERR(p_hwfn, "BAD pq flags %d\n", pq_flags);
-	return NULL;
+	return &qm_info->start_pq;
 }
 
 /* save pq index in qm info */
@@ -493,20 +497,32 @@ u16 qed_get_cm_pq_idx_mcos(struct qed_hwfn *p_hwfn, u8 tc)
 {
 	u8 max_tc = qed_init_qm_get_num_tcs(p_hwfn);
 
+	if (max_tc == 0) {
+		DP_ERR(p_hwfn, "pq with flag 0x%lx do not exist\n",
+		       PQ_FLAGS_MCOS);
+		return p_hwfn->qm_info.start_pq;
+	}
+
 	if (tc > max_tc)
 		DP_ERR(p_hwfn, "tc %d must be smaller than %d\n", tc, max_tc);
 
-	return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_MCOS) + tc;
+	return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_MCOS) + (tc % max_tc);
 }
 
 u16 qed_get_cm_pq_idx_vf(struct qed_hwfn *p_hwfn, u16 vf)
 {
 	u16 max_vf = qed_init_qm_get_num_vfs(p_hwfn);
 
+	if (max_vf == 0) {
+		DP_ERR(p_hwfn, "pq with flag 0x%lx do not exist\n",
+		       PQ_FLAGS_VFS);
+		return p_hwfn->qm_info.start_pq;
+	}
+
 	if (vf > max_vf)
 		DP_ERR(p_hwfn, "vf %d must be smaller than %d\n", vf, max_vf);
 
-	return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_VFS) + vf;
+	return qed_get_cm_pq_idx(p_hwfn, PQ_FLAGS_VFS) + (vf % max_vf);
 }
 
 u16 qed_get_cm_pq_idx_rl(struct qed_hwfn *p_hwfn, u8 rl)
-- 
2.17.1

[PATCH AUTOSEL 4.14 26/35] net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts

[Sasha Levin]

From: Vincent Chen <vincentc@andestech.com>

[ Upstream commit 426a593e641ebf0d9288f0a2fcab644a86820220 ]

In the original ftmac100_interrupt(), the interrupts are only disabled when
the condition "netif_running(netdev)" is true. However, this condition
causes kerenl hang in the following case. When the user requests to
disable the network device, kernel will clear the bit __LINK_STATE_START
from the dev->state and then call the driver's ndo_stop function. Network
device interrupts are not blocked during this process. If an interrupt
occurs between clearing __LINK_STATE_START and stopping network device,
kernel cannot disable the interrupts due to the condition
"netif_running(netdev)" in the ISR. Hence, kernel will hang due to the
continuous interruption of the network device.

In order to solve the above problem, the interrupts of the network device
should always be disabled in the ISR without being restricted by the
condition "netif_running(netdev)".

[V2]
Remove unnecessary curly braces.

Signed-off-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/faraday/ftmac100.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c
index 66928a922824..415fd93e9930 100644
--- a/drivers/net/ethernet/faraday/ftmac100.c
+++ b/drivers/net/ethernet/faraday/ftmac100.c
@@ -870,11 +870,10 @@ static irqreturn_t ftmac100_interrupt(int irq, void *dev_id)
 	struct net_device *netdev = dev_id;
 	struct ftmac100 *priv = netdev_priv(netdev);
 
-	if (likely(netif_running(netdev))) {
-		/* Disable interrupts for polling */
-		ftmac100_disable_all_int(priv);
+	/* Disable interrupts for polling */
+	ftmac100_disable_all_int(priv);
+	if (likely(netif_running(netdev)))
 		napi_schedule(&priv->napi);
-	}
 
 	return IRQ_HANDLED;
 }
-- 
2.17.1

[PATCH AUTOSEL 4.14 29/35] net: thunderx: set xdp_prog to NULL if bpf_prog_add fails

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>

[ Upstream commit 6d0f60b0f8588fd4380ea5df9601e12fddd55ce2 ]

Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine
reports the error code instead of NULL in case of failure and xdp_prog
pointer value is used in the driver to verify if XDP is currently
enabled.
Moreover report the error code to userspace if nicvf_xdp_setup fails

Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/thunder/nicvf_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index 2237ef8e4344..f13256af8031 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -1691,6 +1691,7 @@ static int nicvf_xdp_setup(struct nicvf *nic, struct bpf_prog *prog)
 	bool if_up = netif_running(nic->netdev);
 	struct bpf_prog *old_prog;
 	bool bpf_attached = false;
+	int ret = 0;
 
 	/* For now just support only the usual MTU sized frames */
 	if (prog && (dev->mtu > 1500)) {
@@ -1724,8 +1725,12 @@ static int nicvf_xdp_setup(struct nicvf *nic, struct bpf_prog *prog)
 	if (nic->xdp_prog) {
 		/* Attach BPF program */
 		nic->xdp_prog = bpf_prog_add(nic->xdp_prog, nic->rx_queues - 1);
-		if (!IS_ERR(nic->xdp_prog))
+		if (!IS_ERR(nic->xdp_prog)) {
 			bpf_attached = true;
+		} else {
+			ret = PTR_ERR(nic->xdp_prog);
+			nic->xdp_prog = NULL;
+		}
 	}
 
 	/* Calculate Tx queues needed for XDP and network stack */
@@ -1737,7 +1742,7 @@ static int nicvf_xdp_setup(struct nicvf *nic, struct bpf_prog *prog)
 		netif_trans_update(nic->netdev);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int nicvf_xdp(struct net_device *netdev, struct netdev_xdp *xdp)
-- 
2.17.1

[PATCH AUTOSEL 4.14 30/35] ibmvnic: Fix RX queue buffer cleanup

[Sasha Levin]

From: Thomas Falcon <tlfalcon@linux.ibm.com>

[ Upstream commit b7cdec3d699db2e5985ad39de0f25d3b6111928e ]

The wrong index is used when cleaning up RX buffer objects during release
of RX queues. Update to use the correct index counter.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 5c7134ccc1fd..14c53ed5cca6 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -457,8 +457,8 @@ static void release_rx_pools(struct ibmvnic_adapter *adapter)
 
 		for (j = 0; j < rx_pool->size; j++) {
 			if (rx_pool->rx_buff[j].skb) {
-				dev_kfree_skb_any(rx_pool->rx_buff[i].skb);
-				rx_pool->rx_buff[i].skb = NULL;
+				dev_kfree_skb_any(rx_pool->rx_buff[j].skb);
+				rx_pool->rx_buff[j].skb = NULL;
 			}
 		}
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 31/35] virtio-net: disable guest csum during XDP set

[Sasha Levin]

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit e59ff2c49ae16e1d179de679aca81405829aee6c ]

We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we
can receive partial csumed packets with metadata kept in the
vnet_hdr. This may have several side effects:

- It could be overridden by header adjustment, thus is might be not
  correct after XDP processing.
- There's no way to pass such metadata information through
  XDP_REDIRECT to another driver.
- XDP does not support checksum offload right now.

So simply disable guest csum if possible in this the case of XDP.

Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pavel Popa <pashinho1990@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/virtio_net.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index f528e9ac3413..2ffa7b290591 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -61,7 +61,8 @@ static const unsigned long guest_offloads[] = {
 	VIRTIO_NET_F_GUEST_TSO4,
 	VIRTIO_NET_F_GUEST_TSO6,
 	VIRTIO_NET_F_GUEST_ECN,
-	VIRTIO_NET_F_GUEST_UFO
+	VIRTIO_NET_F_GUEST_UFO,
+	VIRTIO_NET_F_GUEST_CSUM
 };
 
 struct virtnet_stats {
@@ -1939,9 +1940,6 @@ static int virtnet_clear_guest_offloads(struct virtnet_info *vi)
 	if (!vi->guest_offloads)
 		return 0;
 
-	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_CSUM))
-		offloads = 1ULL << VIRTIO_NET_F_GUEST_CSUM;
-
 	return virtnet_set_guest_offloads(vi, offloads);
 }
 
@@ -1951,8 +1949,6 @@ static int virtnet_restore_guest_offloads(struct virtnet_info *vi)
 
 	if (!vi->guest_offloads)
 		return 0;
-	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_CSUM))
-		offloads |= 1ULL << VIRTIO_NET_F_GUEST_CSUM;
 
 	return virtnet_set_guest_offloads(vi, offloads);
 }
-- 
2.17.1

[PATCH AUTOSEL 4.14 32/35] virtio-net: fail XDP set if guest csum is negotiated

[Sasha Levin]

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit 18ba58e1c234ea1a2d9835ac8c1735d965ce4640 ]

We don't support partial csumed packet since its metadata will be lost
or incorrect during XDP processing. So fail the XDP set if guest_csum
feature is negotiated.

Fixes: f600b6905015 ("virtio_net: Add XDP support")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pavel Popa <pashinho1990@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/virtio_net.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 2ffa7b290591..0e8e3be50332 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1966,8 +1966,9 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog,
 	    && (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO4) ||
 	        virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO6) ||
 	        virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_ECN) ||
-		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO))) {
-		NL_SET_ERR_MSG_MOD(extack, "Can't set XDP while host is implementing LRO, disable LRO first");
+		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO) ||
+		virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_CSUM))) {
+		NL_SET_ERR_MSG_MOD(extack, "Can't set XDP while host is implementing LRO/CSUM, disable LRO/CSUM first");
 		return -EOPNOTSUPP;
 	}
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 33/35] team: no need to do team_notify_peers or team_mcast_rejoin when disabling port

[Sasha Levin]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 5ed9dc99107144f83b6c1bb52a69b58875baf540 ]

team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin()
will send multicast join group message to notify peers. We should do this when
enabling/changed to a new port. But it doesn't make sense to do it when a port
is disabled.

On the other hand, when we set mcast_rejoin_count to 2, and do a failover,
team_port_disable() will increase mcast_rejoin.count_pending to 2 and then
team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send
4 mcast rejoin messages at latest, which will make user confused. The same
with notify_peers.count.

Fix it by deleting team_notify_peers() and team_mcast_rejoin() in
team_port_disable().

Reported-by: Liang Li <liali@redhat.com>
Fixes: fc423ff00df3a ("team: add peer notification")
Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/team/team.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index 817451a1efd6..bd455a6cc82c 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -989,8 +989,6 @@ static void team_port_disable(struct team *team,
 	team->en_port_count--;
 	team_queue_override_port_del(team, port);
 	team_adjust_ops(team);
-	team_notify_peers(team);
-	team_mcast_rejoin(team);
 	team_lower_state_changed(port);
 }
 
-- 
2.17.1

[PATCH AUTOSEL 4.14 34/35] net: amd: add missing of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit c44c749d3b6fdfca39002e7e48e03fe9f9fe37a3 ]

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place doesn't do that, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/sunlance.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amd/sunlance.c b/drivers/net/ethernet/amd/sunlance.c
index 291ca5187f12..9845e07d40cd 100644
--- a/drivers/net/ethernet/amd/sunlance.c
+++ b/drivers/net/ethernet/amd/sunlance.c
@@ -1418,7 +1418,7 @@ static int sparc_lance_probe_one(struct platform_device *op,
 
 			prop = of_get_property(nd, "tpe-link-test?", NULL);
 			if (!prop)
-				goto no_link_test;
+				goto node_put;
 
 			if (strcmp(prop, "true")) {
 				printk(KERN_NOTICE "SunLance: warning: overriding option "
@@ -1427,6 +1427,8 @@ static int sparc_lance_probe_one(struct platform_device *op,
 				       "to ecd@skynet.be\n");
 				auxio_set_lte(AUXIO_LTE_ON);
 			}
+node_put:
+			of_node_put(nd);
 no_link_test:
 			lp->auto_select = 1;
 			lp->tpe = 0;
-- 
2.17.1

[PATCH AUTOSEL 4.14 35/35] net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>

[ Upstream commit ef2a7cf1d8831535b8991459567b385661eb4a36 ]

Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine
since it is used to check if tso dma descriptor queue has been previously
allocated. The issue can be triggered with the following reproducer:

$ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o
$ip link set dev enP2p1s0v0 xdpdrv off

[  341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0
[  341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[  341.521874] pstate: 60400005 (nZCv daif +PAN -UAO)
[  341.526654] pc : __vunmap+0x98/0xe0
[  341.530132] lr : __vunmap+0x98/0xe0
[  341.533609] sp : ffff00001c5db860
[  341.536913] x29: ffff00001c5db860 x28: 0000000000020000
[  341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000
[  341.547515] x25: 0000000000000000 x24: 00000000fbd00000
[  341.552816] x23: 0000000000000000 x22: ffff810feb5090b0
[  341.558117] x21: 0000000000000000 x20: 0000000000000000
[  341.563418] x19: ffff000017e57000 x18: 0000000000000000
[  341.568719] x17: 0000000000000000 x16: 0000000000000000
[  341.574020] x15: 0000000000000010 x14: ffffffffffffffff
[  341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f
[  341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510
[  341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8
[  341.595224] x7 : 3430303030303030 x6 : 00000000000006ef
[  341.600525] x5 : 00000000003fffff x4 : 0000000000000000
[  341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff
[  341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038
[  341.616428] Call trace:
[  341.618866]  __vunmap+0x98/0xe0
[  341.621997]  vunmap+0x3c/0x50
[  341.624961]  arch_dma_free+0x68/0xa0
[  341.628534]  dma_direct_free+0x50/0x80
[  341.632285]  nicvf_free_resources+0x160/0x2d8 [nicvf]
[  341.637327]  nicvf_config_data_transfer+0x174/0x5e8 [nicvf]
[  341.642890]  nicvf_stop+0x298/0x340 [nicvf]
[  341.647066]  __dev_close_many+0x9c/0x108
[  341.650977]  dev_close_many+0xa4/0x158
[  341.654720]  rollback_registered_many+0x140/0x530
[  341.659414]  rollback_registered+0x54/0x80
[  341.663499]  unregister_netdevice_queue+0x9c/0xe8
[  341.668192]  unregister_netdev+0x28/0x38
[  341.672106]  nicvf_remove+0xa4/0xa8 [nicvf]
[  341.676280]  nicvf_shutdown+0x20/0x30 [nicvf]
[  341.680630]  pci_device_shutdown+0x44/0x88
[  341.684720]  device_shutdown+0x144/0x250
[  341.688640]  kernel_restart_prepare+0x44/0x50
[  341.692986]  kernel_restart+0x20/0x68
[  341.696638]  __se_sys_reboot+0x210/0x238
[  341.700550]  __arm64_sys_reboot+0x24/0x30
[  341.704555]  el0_svc_handler+0x94/0x110
[  341.708382]  el0_svc+0x8/0xc
[  341.711252] ---[ end trace 3f4019c8439959c9 ]---
[  341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4
[  341.723872] flags: 0x1fffe000000000()
[  341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000
[  341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000
[  341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)

where xdp_dummy.c is a simple bpf program that forwards the incoming
frames to the network stack (available here:
https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c)

Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support")
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
index a3d12dbde95b..09494e1c77c5 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c
@@ -585,10 +585,12 @@ static void nicvf_free_snd_queue(struct nicvf *nic, struct snd_queue *sq)
 	if (!sq->dmem.base)
 		return;
 
-	if (sq->tso_hdrs)
+	if (sq->tso_hdrs) {
 		dma_free_coherent(&nic->pdev->dev,
 				  sq->dmem.q_len * TSO_HEADER_SIZE,
 				  sq->tso_hdrs, sq->tso_hdrs_phys);
+		sq->tso_hdrs = NULL;
+	}
 
 	/* Free pending skbs in the queue */
 	smp_rmb();
-- 
2.17.1