[PATCH AUTOSEL 4.4 03/13] can: rcar_can: Fix erroneous registration

[PATCH AUTOSEL 4.4 03/13] can: rcar_can: Fix erroneous registration

[Sasha Levin]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

[ Upstream commit 68c8d209cd4337da4fa04c672f0b62bb735969bc ]

Assigning 2 to "renesas,can-clock-select" tricks the driver into
registering the CAN interface, even though we don't want that.
This patch improves one of the checks to prevent that from happening.

Fixes: 862e2b6af9413b43 ("can: rcar_can: support all input clocks")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/rcar_can.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/rcar_can.c b/drivers/net/can/rcar_can.c
index bc46be39549d..9d93492ddfcc 100644
--- a/drivers/net/can/rcar_can.c
+++ b/drivers/net/can/rcar_can.c
@@ -24,6 +24,9 @@
 
 #define RCAR_CAN_DRV_NAME	"rcar_can"
 
+#define RCAR_SUPPORTED_CLOCKS	(BIT(CLKR_CLKP1) | BIT(CLKR_CLKP2) | \
+				 BIT(CLKR_CLKEXT))
+
 /* Mailbox configuration:
  * mailbox 60 - 63 - Rx FIFO mailboxes
  * mailbox 56 - 59 - Tx FIFO mailboxes
@@ -789,7 +792,7 @@ static int rcar_can_probe(struct platform_device *pdev)
 		goto fail_clk;
 	}
 
-	if (clock_select >= ARRAY_SIZE(clock_names)) {
+	if (!(BIT(clock_select) & RCAR_SUPPORTED_CLOCKS)) {
 		err = -EINVAL;
 		dev_err(&pdev->dev, "invalid CAN clock selected\n");
 		goto fail_clk;
-- 
2.17.1

[PATCH AUTOSEL 4.4 04/13] batman-adv: Expand merged fragment buffer for full packet

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit d7d8bbb40a5b1f682ee6589e212934f4c6b8ad60 ]

The complete size ("total_size") of the fragmented packet is stored in the
fragment header and in the size of the fragment chain. When the fragments
are ready for merge, the skbuff's tail of the first fragment is expanded to
have enough room after the data pointer for at least total_size. This means
that it gets expanded by total_size - first_skb->len.

But this is ignoring the fact that after expanding the buffer, the fragment
header is pulled by from this buffer. Assuming that the tailroom of the
buffer was already 0, the buffer after the data pointer of the skbuff is
now only total_size - len(fragment_header) large. When the merge function
is then processing the remaining fragments, the code to copy the data over
to the merged skbuff will cause an skb_over_panic when it tries to actually
put enough data to fill the total_size bytes of the packet.

The size of the skb_pull must therefore also be taken into account when the
buffer's tailroom is expanded.

Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge")
Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Co-authored-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/fragmentation.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c
index 5d2f9d4879b2..d50c3b003dc9 100644
--- a/net/batman-adv/fragmentation.c
+++ b/net/batman-adv/fragmentation.c
@@ -266,7 +266,7 @@ batadv_frag_merge_packets(struct hlist_head *chain)
 	kfree(entry);
 
 	packet = (struct batadv_frag_packet *)skb_out->data;
-	size = ntohs(packet->total_size);
+	size = ntohs(packet->total_size) + hdr_size;
 
 	/* Make room for the rest of the fragments. */
 	if (pskb_expand_head(skb_out, 0, size - skb_out->len, GFP_ATOMIC) < 0) {
-- 
2.17.1

[PATCH AUTOSEL 4.4 05/13] bnx2x: Assign unique DMAE channel number for FW DMAE transactions.

[Sasha Levin]

From: Sudarsana Reddy Kalluru <sudarsana.kalluru@cavium.com>

[ Upstream commit 77e461d14ed141253573eeeb4d34eccc51e38328 ]

Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW
uses this channel for DMAE operations (e.g., TIME_SYNC implementation).
Driver also uses the same channel 0 for DMAE operations for some of the PFs
(e.g., PF0 on Port0). This could lead to concurrent access to the DMAE
channel by FW and driver which is not legal. Hence need to assign unique
DMAE id for FW.
Currently following DMAE channels are used by the clients,
  MFW - OCBB/OCSD functionality uses DMAE channel 14/15
  Driver 0-3 and 8-11 (for PF dmae operations)
         4 and 12 (for stats requests)
Assigning unique dmae_id '13' to the FW.

Changes from previous version:
------------------------------
v2: Incorporated the review comments.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h    | 7 +++++++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 1 +
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 1ea068815419..2491cdc2535c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2291,6 +2291,13 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
 #define PMF_DMAE_C(bp)			(BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
 					 E1HVN_MAX)
 
+/* Following is the DMAE channel number allocation for the clients.
+ *   MFW: OCBB/OCSD implementations use DMAE channels 14/15 respectively.
+ *   Driver: 0-3 and 8-11 (for PF dmae operations)
+ *           4 and 12 (for stats requests)
+ */
+#define BNX2X_FW_DMAE_C                 13 /* Channel for FW DMAE operations */
+
 /* PCIE link and speed */
 #define PCICFG_LINK_WIDTH		0x1f00000
 #define PCICFG_LINK_WIDTH_SHIFT		20
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index ff702a707a91..343e3366d751 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -5931,6 +5931,7 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
 	rdata->sd_vlan_tag	= cpu_to_le16(start_params->sd_vlan_tag);
 	rdata->path_id		= BP_PATH(bp);
 	rdata->network_cos_mode	= start_params->network_cos_mode;
+	rdata->dmae_cmd_id	= BNX2X_FW_DMAE_C;
 
 	rdata->vxlan_dst_port	= cpu_to_le16(start_params->vxlan_dst_port);
 	rdata->geneve_dst_port	= cpu_to_le16(start_params->geneve_dst_port);
-- 
2.17.1

[PATCH AUTOSEL 4.4 06/13] qed: Fix PTT leak in qed_drain()

[Sasha Levin]

From: Denis Bolotin <denis.bolotin@cavium.com>

[ Upstream commit 9aaa4e8ba12972d674caeefbc5f88d83235dd697 ]

Release PTT before entering error flow.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 35e1468d8196..b8ae6ed5c7ba 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1124,9 +1124,9 @@ static int qed_drain(struct qed_dev *cdev)
 			return -EBUSY;
 		}
 		rc = qed_mcp_drain(hwfn, ptt);
+		qed_ptt_release(hwfn, ptt);
 		if (rc)
 			return rc;
-		qed_ptt_release(hwfn, ptt);
 	}
 
 	return 0;
-- 
2.17.1

[PATCH AUTOSEL 4.4 07/13] qed: Fix reading wrong value in loop condition

[Sasha Levin]

From: Denis Bolotin <denis.bolotin@cavium.com>

[ Upstream commit ed4eac20dcffdad47709422e0cb925981b056668 ]

The value of "sb_index" is written by the hardware. Reading its value and
writing it to "index" must finish before checking the loop condition.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_int.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index 9cc9d62c1fec..8b15a018d625 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -177,6 +177,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn)
 	 */
 	do {
 		index = p_sb_attn->sb_index;
+		/* finish reading index before the loop condition */
+		dma_rmb();
 		attn_bits = le32_to_cpu(p_sb_attn->atten_bits);
 		attn_acks = le32_to_cpu(p_sb_attn->atten_ack);
 	} while (index != p_sb_attn->sb_index);
-- 
2.17.1

[PATCH AUTOSEL 4.4 08/13] net/mlx4_core: Zero out lkey field in SW2HW_MPT fw command

[Sasha Levin]

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

[ Upstream commit bd85fbc2038a1bbe84990b23ff69b6fc81a32b2c ]

When re-registering a user mr, the mpt information for the
existing mr when running SRIOV is obtained via the QUERY_MPT
fw command. The returned information includes the mpt's lkey.

This retrieved mpt information is used to move the mpt back
to hardware ownership in the rereg flow (via the SW2HW_MPT
fw command when running SRIOV).

The fw API spec states that for SW2HW_MPT, the lkey field
must be zero. Any ConnectX-3 PF driver which checks for strict spec
adherence will return failure for SW2HW_MPT if the lkey field is not
zero (although the fw in practice ignores this field for SW2HW_MPT).

Thus, in order to conform to the fw API spec, set the lkey field to zero
before invoking SW2HW_MPT when running SRIOV.

Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/mr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c
index 93195191f45b..53833c06696f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
@@ -366,6 +366,7 @@ int mlx4_mr_hw_write_mpt(struct mlx4_dev *dev, struct mlx4_mr *mmr,
 			container_of((void *)mpt_entry, struct mlx4_cmd_mailbox,
 				     buf);
 
+		(*mpt_entry)->lkey = 0;
 		err = mlx4_SW2HW_MPT(dev, mailbox, key);
 	}
 
-- 
2.17.1

[PATCH AUTOSEL 4.4 09/13] net/mlx4_core: Fix uninitialized variable compilation warning

[Sasha Levin]

From: Tariq Toukan <tariqt@mellanox.com>

[ Upstream commit 3ea7e7ea53c9f6ee41cb69a29c375fe9dd9a56a7 ]

Initialize the uid variable to zero to avoid the compilation warning.

Fixes: 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/alloc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/alloc.c b/drivers/net/ethernet/mellanox/mlx4/alloc.c
index 0c51c69f802f..a4912b11e54f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/alloc.c
+++ b/drivers/net/ethernet/mellanox/mlx4/alloc.c
@@ -339,7 +339,7 @@ void mlx4_zone_allocator_destroy(struct mlx4_zone_allocator *zone_alloc)
 static u32 __mlx4_alloc_from_zone(struct mlx4_zone_entry *zone, int count,
 				  int align, u32 skip_mask, u32 *puid)
 {
-	u32 uid;
+	u32 uid = 0;
 	u32 res;
 	struct mlx4_zone_allocator *zone_alloc = zone->allocator;
 	struct mlx4_zone_entry *curr_node;
-- 
2.17.1

[PATCH AUTOSEL 4.4 10/13] net/mlx4: Fix UBSAN warning of signed integer overflow

[Sasha Levin]

From: Aya Levin <ayal@mellanox.com>

[ Upstream commit a463146e67c848cbab5ce706d6528281b7cded08 ]

UBSAN: Undefined behavior in
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29
signed integer overflow: 1802201963 + 1802201963 cannot be represented
in type 'int'

The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors
granting of reserved resources. The grant operation is calculated and
protected, thus both members of the union cannot be negative.  Changed
type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed
int to unsigned int, allowing large value.

Fixes: 5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/mlx4.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index f5fdbd53d052..db40387ffaf6 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -537,8 +537,8 @@ struct slave_list {
 struct resource_allocator {
 	spinlock_t alloc_lock; /* protect quotas */
 	union {
-		int res_reserved;
-		int res_port_rsvd[MLX4_MAX_PORTS];
+		unsigned int res_reserved;
+		unsigned int res_port_rsvd[MLX4_MAX_PORTS];
 	};
 	union {
 		int res_free;
-- 
2.17.1

[PATCH AUTOSEL 4.4 11/13] net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts

[Sasha Levin]

From: Vincent Chen <vincentc@andestech.com>

[ Upstream commit 426a593e641ebf0d9288f0a2fcab644a86820220 ]

In the original ftmac100_interrupt(), the interrupts are only disabled when
the condition "netif_running(netdev)" is true. However, this condition
causes kerenl hang in the following case. When the user requests to
disable the network device, kernel will clear the bit __LINK_STATE_START
from the dev->state and then call the driver's ndo_stop function. Network
device interrupts are not blocked during this process. If an interrupt
occurs between clearing __LINK_STATE_START and stopping network device,
kernel cannot disable the interrupts due to the condition
"netif_running(netdev)" in the ISR. Hence, kernel will hang due to the
continuous interruption of the network device.

In order to solve the above problem, the interrupts of the network device
should always be disabled in the ISR without being restricted by the
condition "netif_running(netdev)".

[V2]
Remove unnecessary curly braces.

Signed-off-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/faraday/ftmac100.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c
index dce5f7b7f772..05e1f923f49e 100644
--- a/drivers/net/ethernet/faraday/ftmac100.c
+++ b/drivers/net/ethernet/faraday/ftmac100.c
@@ -865,11 +865,10 @@ static irqreturn_t ftmac100_interrupt(int irq, void *dev_id)
 	struct net_device *netdev = dev_id;
 	struct ftmac100 *priv = netdev_priv(netdev);
 
-	if (likely(netif_running(netdev))) {
-		/* Disable interrupts for polling */
-		ftmac100_disable_all_int(priv);
+	/* Disable interrupts for polling */
+	ftmac100_disable_all_int(priv);
+	if (likely(netif_running(netdev)))
 		napi_schedule(&priv->napi);
-	}
 
 	return IRQ_HANDLED;
 }
-- 
2.17.1

[PATCH AUTOSEL 4.4 13/13] net: amd: add missing of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit c44c749d3b6fdfca39002e7e48e03fe9f9fe37a3 ]

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place doesn't do that, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/sunlance.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amd/sunlance.c b/drivers/net/ethernet/amd/sunlance.c
index 7847638bdd22..8914170fccff 100644
--- a/drivers/net/ethernet/amd/sunlance.c
+++ b/drivers/net/ethernet/amd/sunlance.c
@@ -1419,7 +1419,7 @@ static int sparc_lance_probe_one(struct platform_device *op,
 
 			prop = of_get_property(nd, "tpe-link-test?", NULL);
 			if (!prop)
-				goto no_link_test;
+				goto node_put;
 
 			if (strcmp(prop, "true")) {
 				printk(KERN_NOTICE "SunLance: warning: overriding option "
@@ -1428,6 +1428,8 @@ static int sparc_lance_probe_one(struct platform_device *op,
 				       "to ecd@skynet.be\n");
 				auxio_set_lte(AUXIO_LTE_ON);
 			}
+node_put:
+			of_node_put(nd);
 no_link_test:
 			lp->auto_select = 1;
 			lp->tpe = 0;
-- 
2.17.1