From: Pablo Neira Ayuso <pablo@netfilter.org>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, thomas.lendacky@amd.com,
f.fainelli@gmail.com, ariel.elior@cavium.com,
michael.chan@broadcom.com, santosh@chelsio.com,
madalin.bucur@nxp.com, yisen.zhuang@huawei.com,
salil.mehta@huawei.com, jeffrey.t.kirsher@intel.com,
tariqt@mellanox.com, saeedm@mellanox.com, jiri@mellanox.com,
idosch@mellanox.com, jakub.kicinski@netronome.com,
peppe.cavallaro@st.com, grygorii.strashko@ti.com, andrew@lunn.ch,
vivien.didelot@savoirfairelinux.com, alexandre.torgue@st.com,
joabreu@synopsys.com, linux-net-drivers@solarflare.com,
ganeshgr@chelsio.com, ogerlitz@mellanox.com,
Manish.Chopra@cavium.com, marcelo.leitner@gmail.com,
mkubecek@suse.cz, venkatkumar.duvvuru@broadcom.com,
julia.lawall@lip6.fr, john.fastabend@gmail.com
Subject: [PATCH net-next,v5 02/12] net/mlx5e: support for two independent packet edit actions
Date: Thu, 6 Dec 2018 23:39:52 +0100 [thread overview]
Message-ID: <20181206224002.5109-3-pablo@netfilter.org> (raw)
In-Reply-To: <20181206224002.5109-1-pablo@netfilter.org>
This patch adds pedit_headers_action structure to store the result of
parsing tc pedit actions. Then, it calls alloc_tc_pedit_action() to
populate the mlx5e hardware intermediate representation once all actions
have been parsed.
This patch comes in preparation for the new flow_action infrastructure,
where each packet mangling comes in an separated action, ie. not packed
as in tc pedit.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
v5: rebase on top of net-next head.
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 81 ++++++++++++++++++-------
1 file changed, 59 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index d2e6c6578b9c..1daaab91280f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -1751,6 +1751,12 @@ struct pedit_headers {
struct udphdr udp;
};
+struct pedit_headers_action {
+ struct pedit_headers vals;
+ struct pedit_headers masks;
+ u32 pedits;
+};
+
static int pedit_header_offsets[] = {
[TCA_PEDIT_KEY_EX_HDR_TYPE_ETH] = offsetof(struct pedit_headers, eth),
[TCA_PEDIT_KEY_EX_HDR_TYPE_IP4] = offsetof(struct pedit_headers, ip4),
@@ -1762,16 +1768,15 @@ static int pedit_header_offsets[] = {
#define pedit_header(_ph, _htype) ((void *)(_ph) + pedit_header_offsets[_htype])
static int set_pedit_val(u8 hdr_type, u32 mask, u32 val, u32 offset,
- struct pedit_headers *masks,
- struct pedit_headers *vals)
+ struct pedit_headers_action *hdrs)
{
u32 *curr_pmask, *curr_pval;
if (hdr_type >= __PEDIT_HDR_TYPE_MAX)
goto out_err;
- curr_pmask = (u32 *)(pedit_header(masks, hdr_type) + offset);
- curr_pval = (u32 *)(pedit_header(vals, hdr_type) + offset);
+ curr_pmask = (u32 *)(pedit_header(&hdrs->masks, hdr_type) + offset);
+ curr_pval = (u32 *)(pedit_header(&hdrs->vals, hdr_type) + offset);
if (*curr_pmask & mask) /* disallow acting twice on the same location */
goto out_err;
@@ -1827,8 +1832,7 @@ static struct mlx5_fields fields[] = {
* max from the SW pedit action. On success, it says how many HW actions were
* actually parsed.
*/
-static int offload_pedit_fields(struct pedit_headers *masks,
- struct pedit_headers *vals,
+static int offload_pedit_fields(struct pedit_headers_action *hdrs,
struct mlx5e_tc_flow_parse_attr *parse_attr,
struct netlink_ext_ack *extack)
{
@@ -1843,10 +1847,10 @@ static int offload_pedit_fields(struct pedit_headers *masks,
__be16 mask_be16;
void *action;
- set_masks = &masks[TCA_PEDIT_KEY_EX_CMD_SET];
- add_masks = &masks[TCA_PEDIT_KEY_EX_CMD_ADD];
- set_vals = &vals[TCA_PEDIT_KEY_EX_CMD_SET];
- add_vals = &vals[TCA_PEDIT_KEY_EX_CMD_ADD];
+ set_masks = &hdrs[TCA_PEDIT_KEY_EX_CMD_SET].masks;
+ add_masks = &hdrs[TCA_PEDIT_KEY_EX_CMD_ADD].masks;
+ set_vals = &hdrs[TCA_PEDIT_KEY_EX_CMD_SET].vals;
+ add_vals = &hdrs[TCA_PEDIT_KEY_EX_CMD_ADD].vals;
action_size = MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto);
action = parse_attr->mod_hdr_actions;
@@ -1942,12 +1946,14 @@ static int offload_pedit_fields(struct pedit_headers *masks,
}
static int alloc_mod_hdr_actions(struct mlx5e_priv *priv,
- const struct tc_action *a, int namespace,
+ struct pedit_headers_action *hdrs,
+ int namespace,
struct mlx5e_tc_flow_parse_attr *parse_attr)
{
int nkeys, action_size, max_actions;
- nkeys = tcf_pedit_nkeys(a);
+ nkeys = hdrs[TCA_PEDIT_KEY_EX_CMD_SET].pedits +
+ hdrs[TCA_PEDIT_KEY_EX_CMD_ADD].pedits;
action_size = MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto);
if (namespace == MLX5_FLOW_NAMESPACE_FDB) /* FDB offloading */
@@ -1971,18 +1977,15 @@ static const struct pedit_headers zero_masks = {};
static int parse_tc_pedit_action(struct mlx5e_priv *priv,
const struct tc_action *a, int namespace,
struct mlx5e_tc_flow_parse_attr *parse_attr,
+ struct pedit_headers_action *hdrs,
struct netlink_ext_ack *extack)
{
- struct pedit_headers masks[__PEDIT_CMD_MAX], vals[__PEDIT_CMD_MAX], *cmd_masks;
int nkeys, i, err = -EOPNOTSUPP;
u32 mask, val, offset;
u8 cmd, htype;
nkeys = tcf_pedit_nkeys(a);
- memset(masks, 0, sizeof(struct pedit_headers) * __PEDIT_CMD_MAX);
- memset(vals, 0, sizeof(struct pedit_headers) * __PEDIT_CMD_MAX);
-
for (i = 0; i < nkeys; i++) {
htype = tcf_pedit_htype(a, i);
cmd = tcf_pedit_cmd(a, i);
@@ -2003,21 +2006,37 @@ static int parse_tc_pedit_action(struct mlx5e_priv *priv,
val = tcf_pedit_val(a, i);
offset = tcf_pedit_offset(a, i);
- err = set_pedit_val(htype, ~mask, val, offset, &masks[cmd], &vals[cmd]);
+ err = set_pedit_val(htype, ~mask, val, offset, &hdrs[cmd]);
if (err)
goto out_err;
+
+ hdrs[cmd].pedits++;
}
- err = alloc_mod_hdr_actions(priv, a, namespace, parse_attr);
+ return 0;
+out_err:
+ return err;
+}
+
+static int alloc_tc_pedit_action(struct mlx5e_priv *priv, int namespace,
+ struct mlx5e_tc_flow_parse_attr *parse_attr,
+ struct pedit_headers_action *hdrs,
+ struct netlink_ext_ack *extack)
+{
+ struct pedit_headers *cmd_masks;
+ int err;
+ u8 cmd;
+
+ err = alloc_mod_hdr_actions(priv, hdrs, namespace, parse_attr);
if (err)
goto out_err;
- err = offload_pedit_fields(masks, vals, parse_attr, extack);
+ err = offload_pedit_fields(hdrs, parse_attr, extack);
if (err < 0)
goto out_dealloc_parsed_actions;
for (cmd = 0; cmd < __PEDIT_CMD_MAX; cmd++) {
- cmd_masks = &masks[cmd];
+ cmd_masks = &hdrs[cmd].masks;
if (memcmp(cmd_masks, &zero_masks, sizeof(zero_masks))) {
NL_SET_ERR_MSG_MOD(extack,
"attempt to offload an unsupported field");
@@ -2159,6 +2178,7 @@ static int parse_tc_nic_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
struct mlx5e_tc_flow *flow,
struct netlink_ext_ack *extack)
{
+ struct pedit_headers_action hdrs[__PEDIT_CMD_MAX] = {};
struct mlx5_nic_flow_attr *attr = flow->nic_attr;
const struct tc_action *a;
LIST_HEAD(actions);
@@ -2181,7 +2201,7 @@ static int parse_tc_nic_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
if (is_tcf_pedit(a)) {
err = parse_tc_pedit_action(priv, a, MLX5_FLOW_NAMESPACE_KERNEL,
- parse_attr, extack);
+ parse_attr, hdrs, extack);
if (err)
return err;
@@ -2235,6 +2255,14 @@ static int parse_tc_nic_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
return -EINVAL;
}
+ if (hdrs[TCA_PEDIT_KEY_EX_CMD_SET].pedits ||
+ hdrs[TCA_PEDIT_KEY_EX_CMD_ADD].pedits) {
+ err = alloc_tc_pedit_action(priv, MLX5_FLOW_NAMESPACE_KERNEL,
+ parse_attr, hdrs, extack);
+ if (err)
+ return err;
+ }
+
attr->action = action;
if (!actions_match_supported(priv, exts, parse_attr, flow, extack))
return -EOPNOTSUPP;
@@ -2781,6 +2809,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
struct mlx5e_tc_flow *flow,
struct netlink_ext_ack *extack)
{
+ struct pedit_headers_action hdrs[__PEDIT_CMD_MAX] = {};
struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
struct mlx5_esw_flow_attr *attr = flow->esw_attr;
struct mlx5e_rep_priv *rpriv = priv->ppriv;
@@ -2806,7 +2835,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
if (is_tcf_pedit(a)) {
err = parse_tc_pedit_action(priv, a, MLX5_FLOW_NAMESPACE_FDB,
- parse_attr, extack);
+ parse_attr, hdrs, extack);
if (err)
return err;
@@ -2912,6 +2941,14 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
return -EINVAL;
}
+ if (hdrs[TCA_PEDIT_KEY_EX_CMD_SET].pedits ||
+ hdrs[TCA_PEDIT_KEY_EX_CMD_ADD].pedits) {
+ err = alloc_tc_pedit_action(priv, MLX5_FLOW_NAMESPACE_KERNEL,
+ parse_attr, hdrs, extack);
+ if (err)
+ return err;
+ }
+
attr->action = action;
if (!actions_match_supported(priv, exts, parse_attr, flow, extack))
return -EOPNOTSUPP;
--
2.11.0
next prev parent reply other threads:[~2018-12-06 22:40 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-06 22:39 [PATCH net-next,v5 00/12] add flow_rule infrastructure Pablo Neira Ayuso
2018-12-06 22:39 ` [PATCH net-next,v5 01/12] flow_offload: add flow_rule and flow_match structures and use them Pablo Neira Ayuso
2018-12-08 8:27 ` Jiri Pirko
2018-12-06 22:39 ` Pablo Neira Ayuso [this message]
2018-12-08 8:49 ` [PATCH net-next,v5 02/12] net/mlx5e: support for two independent packet edit actions Jiri Pirko
2018-12-06 22:39 ` [PATCH net-next,v5 03/12] flow_offload: add flow action infrastructure Pablo Neira Ayuso
2018-12-08 8:49 ` Jiri Pirko
2018-12-06 22:39 ` [PATCH net-next,v5 04/12] cls_api: add translator to flow_action representation Pablo Neira Ayuso
2018-12-08 8:49 ` Jiri Pirko
2018-12-06 22:39 ` [PATCH net-next,v5 05/12] flow_offload: add statistics retrieval infrastructure and use it Pablo Neira Ayuso
2018-12-08 12:56 ` Jiri Pirko
2018-12-06 22:39 ` [PATCH net-next,v5 06/12] drivers: net: use flow action infrastructure Pablo Neira Ayuso
2018-12-08 12:59 ` Jiri Pirko
2018-12-06 22:39 ` [PATCH net-next,v5 07/12] cls_flower: don't expose TC actions to drivers anymore Pablo Neira Ayuso
2018-12-08 12:57 ` Jiri Pirko
2018-12-06 22:39 ` [PATCH net-next,v5 08/12] flow_offload: add wake-up-on-lan and queue to flow_action Pablo Neira Ayuso
2018-12-08 13:12 ` Jiri Pirko
2018-12-06 22:39 ` [PATCH net-next,v5 09/12] ethtool: add ethtool_rx_flow_spec to flow_rule structure translator Pablo Neira Ayuso
2018-12-08 13:14 ` Jiri Pirko
2018-12-06 22:40 ` [PATCH net-next,v5 10/12] dsa: bcm_sf2: use flow_rule infrastructure Pablo Neira Ayuso
2018-12-08 17:22 ` Jiri Pirko
2018-12-06 22:40 ` [PATCH net-next,v5 11/12] qede: place ethtool_rx_flow_spec after code after TC flower codebase Pablo Neira Ayuso
2018-12-08 17:22 ` Jiri Pirko
2018-12-06 22:40 ` [PATCH net-next,v5 12/12] qede: use ethtool_rx_flow_rule() to remove duplicated parser code Pablo Neira Ayuso
2018-12-11 15:35 ` [net-next,v5,00/12] add flow_rule infrastructure Florian Westphal
2018-12-11 19:14 ` David Miller
2018-12-11 20:59 ` Or Gerlitz
2018-12-11 22:17 ` Jakub Kicinski
2018-12-13 10:06 ` Or Gerlitz
2018-12-13 19:23 ` Jakub Kicinski
2018-12-13 19:54 ` Pablo Neira Ayuso
2018-12-13 20:17 ` Michal Kubecek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181206224002.5109-3-pablo@netfilter.org \
--to=pablo@netfilter.org \
--cc=Manish.Chopra@cavium.com \
--cc=alexandre.torgue@st.com \
--cc=andrew@lunn.ch \
--cc=ariel.elior@cavium.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=ganeshgr@chelsio.com \
--cc=grygorii.strashko@ti.com \
--cc=idosch@mellanox.com \
--cc=jakub.kicinski@netronome.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jiri@mellanox.com \
--cc=joabreu@synopsys.com \
--cc=john.fastabend@gmail.com \
--cc=julia.lawall@lip6.fr \
--cc=linux-net-drivers@solarflare.com \
--cc=madalin.bucur@nxp.com \
--cc=marcelo.leitner@gmail.com \
--cc=michael.chan@broadcom.com \
--cc=mkubecek@suse.cz \
--cc=netdev@vger.kernel.org \
--cc=ogerlitz@mellanox.com \
--cc=peppe.cavallaro@st.com \
--cc=saeedm@mellanox.com \
--cc=salil.mehta@huawei.com \
--cc=santosh@chelsio.com \
--cc=tariqt@mellanox.com \
--cc=thomas.lendacky@amd.com \
--cc=venkatkumar.duvvuru@broadcom.com \
--cc=vivien.didelot@savoirfairelinux.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).