netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Matteo Croce <mcroce@redhat.com>,
	"David S . Miller" <davem@davemloft.net>,
	Sasha Levin <sashal@kernel.org>,
	netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 46/73] macvlan: return correct error value
Date: Wed, 12 Dec 2018 23:28:11 -0500	[thread overview]
Message-ID: <20181213042838.75160-46-sashal@kernel.org> (raw)
In-Reply-To: <20181213042838.75160-1-sashal@kernel.org>

From: Matteo Croce <mcroce@redhat.com>

[ Upstream commit 59f997b088d26a774958cb7b17b0763cd82de7ec ]

A MAC address must be unique among all the macvlan devices with the same
lower device. The only exception is the passthru [sic] mode,
which shares the lower device address.

When duplicate addresses are detected, EBUSY is returned when bringing
the interface up:

    # ip link add macvlan0 link eth0 type macvlan
    # read addr </sys/class/net/eth0/address
    # ip link set macvlan0 address $addr
    # ip link set macvlan0 up
    RTNETLINK answers: Device or resource busy

Use correct error code which is EADDRINUSE, and do the check also
earlier, on address change:

    # ip link set macvlan0 address $addr
    RTNETLINK answers: Address already in use

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macvlan.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index cfda146f3b3b..6372cdc4a510 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -608,7 +608,7 @@ static int macvlan_open(struct net_device *dev)
 		goto hash_add;
 	}
 
-	err = -EBUSY;
+	err = -EADDRINUSE;
 	if (macvlan_addr_busy(vlan->port, dev->dev_addr))
 		goto out;
 
@@ -706,7 +706,7 @@ static int macvlan_sync_address(struct net_device *dev, unsigned char *addr)
 	} else {
 		/* Rehash and update the device filters */
 		if (macvlan_addr_busy(vlan->port, addr))
-			return -EBUSY;
+			return -EADDRINUSE;
 
 		if (!macvlan_passthru(port)) {
 			err = dev_uc_add(lowerdev, addr);
@@ -747,6 +747,9 @@ static int macvlan_set_mac_address(struct net_device *dev, void *p)
 		return dev_set_mac_address(vlan->lowerdev, addr);
 	}
 
+	if (macvlan_addr_busy(vlan->port, addr->sa_data))
+		return -EADDRINUSE;
+
 	return macvlan_sync_address(dev, addr->sa_data);
 }
 
-- 
2.19.1

  parent reply	other threads:[~2018-12-13  4:28 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-13  4:27 [PATCH AUTOSEL 4.19 01/73] mac80211_hwsim: fix module init error paths for netlink Sasha Levin
2018-12-13  4:27 ` [PATCH AUTOSEL 4.19 06/73] tools/bpf: fix two test_btf unit test cases Sasha Levin
2018-12-13  4:27 ` [PATCH AUTOSEL 4.19 07/73] tools/bpf: add addition type tests to test_btf Sasha Levin
2018-12-13  4:27 ` [PATCH AUTOSEL 4.19 08/73] net: ethernet: ave: Replace NET_IP_ALIGN with AVE_FRAME_HEADROOM Sasha Levin
2018-12-13  4:27 ` [PATCH AUTOSEL 4.19 09/73] net: phy: sfp: correct store of detected link modes Sasha Levin
2018-12-13  4:27 ` [PATCH AUTOSEL 4.19 20/73] net: stmmac: Move debugfs init/exit to ->probe()/->remove() Sasha Levin
2018-12-13  4:27 ` [PATCH AUTOSEL 4.19 21/73] net: aquantia: fix rx checksum offload bits Sasha Levin
2018-12-13  4:27 ` [PATCH AUTOSEL 4.19 22/73] bonding: fix 802.3ad state sent to partner when unbinding slave Sasha Levin
2018-12-13  4:27 ` [PATCH AUTOSEL 4.19 23/73] bpf: Fix verifier log string check for bad alignment Sasha Levin
2018-12-13  4:27 ` [PATCH AUTOSEL 4.19 24/73] liquidio: read sc->iq_no before release sc Sasha Levin
2018-12-13  4:27 ` [PATCH AUTOSEL 4.19 26/73] SUNRPC: Fix leak of krb5p encode pages Sasha Levin
2018-12-13  4:27 ` [PATCH AUTOSEL 4.19 27/73] SUNRPC: Fix a potential race in xprt_connect() Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 42/73] net: phy: don't allow __set_phy_supported to add unsupported modes Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 43/73] net: 8139cp: fix a BUG triggered by changing mtu with network traffic Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 44/73] net: phy: Fix not to call phy_resume() if PHY is not attached Sasha Levin
2018-12-13  4:48   ` Yoshihiro Shimoda
2018-12-19 13:43     ` Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 45/73] net: phy: micrel: add toggling phy reset " Sasha Levin
2018-12-13  4:44   ` Yoshihiro Shimoda
2018-12-19 13:43     ` Sasha Levin
2018-12-13  4:28 ` Sasha Levin [this message]
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 47/73] mv88e6060: disable hardware level MAC learning Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 48/73] net/mlx4_en: Change min MTU size to ETH_MIN_MTU Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 49/73] net/mlx4_en: Fix build break when CONFIG_INET is off Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 50/73] bpf: check pending signals while verifying programs Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 54/73] ethernet: fman: fix wrong of_node_put() in probe function Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 56/73] net: mvpp2: fix detection of 10G SFP modules Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 57/73] net: mvpp2: fix phylink handling of invalid PHY modes Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 64/73] vhost/vsock: fix reset orphans race with close timeout Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 65/73] mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 72/73] Revert "net/ibm/emac: wrong bit is used for STA control" Sasha Levin
2018-12-13  4:28 ` [PATCH AUTOSEL 4.19 73/73] net/mlx4_core: Correctly set PFC param if global pause is turned off Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181213042838.75160-46-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mcroce@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).