[PATCH AUTOSEL 4.14 01/41] mac80211_hwsim: fix module init error paths for netlink

[PATCH AUTOSEL 4.14 01/41] mac80211_hwsim: fix module init error paths for netlink

[Sasha Levin]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit 05cc09de4c017663a217630682041066f2f9a5cd ]

There is no unregister netlink notifier and family on error paths
in init_mac80211_hwsim(). Also there is an error path where
hwsim_class is not destroyed.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 62759361eb49 ("mac80211-hwsim: Provide multicast event for HWSIM_CMD_NEW_RADIO")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mac80211_hwsim.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 477f9f2f6626..4886141e85ba 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -3472,16 +3472,16 @@ static int __init init_mac80211_hwsim(void)
 	if (err)
 		goto out_unregister_pernet;
 
+	err = hwsim_init_netlink();
+	if (err)
+		goto out_unregister_driver;
+
 	hwsim_class = class_create(THIS_MODULE, "mac80211_hwsim");
 	if (IS_ERR(hwsim_class)) {
 		err = PTR_ERR(hwsim_class);
-		goto out_unregister_driver;
+		goto out_exit_netlink;
 	}
 
-	err = hwsim_init_netlink();
-	if (err < 0)
-		goto out_unregister_driver;
-
 	for (i = 0; i < radios; i++) {
 		struct hwsim_new_radio_params param = { 0 };
 
@@ -3587,6 +3587,8 @@ static int __init init_mac80211_hwsim(void)
 	free_netdev(hwsim_mon);
 out_free_radios:
 	mac80211_hwsim_free();
+out_exit_netlink:
+	hwsim_exit_netlink();
 out_unregister_driver:
 	platform_driver_unregister(&mac80211_hwsim_driver);
 out_unregister_pernet:
-- 
2.19.1

[PATCH AUTOSEL 4.14 08/41] bonding: fix 802.3ad state sent to partner when unbinding slave

[Sasha Levin]

From: Toni Peltonen <peltzi@peltzi.fi>

[ Upstream commit 3b5b3a3331d141e8f2a7aaae3a94dfa1e61ecbe4 ]

Previously when unbinding a slave the 802.3ad implementation only told
partner that the port is not suitable for aggregation by setting the port
aggregation state from aggregatable to individual. This is not enough. If the
physical layer still stays up and we only unbinded this port from the bond there
is nothing in the aggregation status alone to prevent the partner from sending
traffic towards us. To ensure that the partner doesn't consider this
port at all anymore we should also disable collecting and distributing to
signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to
ensure partner exits collecting + distributing state.

I have tested this behaviour againts Arista EOS switches with mlx5 cards
(physical link stays up even when interface is down) and simulated
the same situation virtually Linux <-> Linux with two network namespaces
running two veth device pairs. In both cases setting aggregation to
individual doesn't alone prevent traffic from being to sent towards this
port given that the link stays up in partners end. Partner still keeps
it's end in collecting + distributing state and continues until timeout is
reached. In most cases this means we are losing the traffic partner sends
towards our port while we wait for timeout. This is most visible with slow
periodic time (LACP rate slow).

Other open source implementations like Open VSwitch and libreswitch, and
vendor implementations like Arista EOS, seem to disable collecting +
distributing to when doing similar port disabling/detaching/removing change.
With this patch kernel implementation would behave the same way and ensure
partner doesn't consider our actor viable anymore.

Signed-off-by: Toni Peltonen <peltzi@peltzi.fi>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_3ad.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index f43fb2f958a5..93dfcef8afc4 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2086,6 +2086,9 @@ void bond_3ad_unbind_slave(struct slave *slave)
 		   aggregator->aggregator_identifier);
 
 	/* Tell the partner that this port is not suitable for aggregation */
+	port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
+	port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
+	port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
 	port->actor_oper_port_state &= ~AD_STATE_AGGREGATION;
 	__update_lacpdu_from_port(port);
 	ad_lacpdu_send(port);
-- 
2.19.1

[PATCH AUTOSEL 4.14 09/41] bpf: Fix verifier log string check for bad alignment.

[Sasha Levin]

From: David Miller <davem@davemloft.net>

[ Upstream commit c01ac66b38660f2b507ccd0b75d28e3002d56fbb ]

The message got changed a lot time ago.

This was responsible for 36 test case failures on sparc64.

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_verifier.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 041dbbb30ff0..a0591d06c61b 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -8070,7 +8070,7 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 
 	reject_from_alignment = fd_prog < 0 &&
 				(test->flags & F_NEEDS_EFFICIENT_UNALIGNED_ACCESS) &&
-				strstr(bpf_vlog, "Unknown alignment.");
+				strstr(bpf_vlog, "misaligned");
 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 	if (reject_from_alignment) {
 		printf("FAIL\nFailed due to alignment despite having efficient unaligned access: '%s'!\n",
-- 
2.19.1

[PATCH AUTOSEL 4.14 11/41] SUNRPC: Fix leak of krb5p encode pages

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 8dae5398ab1ac107b1517e8195ed043d5f422bd0 ]

call_encode can be invoked more than once per RPC call. Ensure that
each call to gss_wrap_req_priv does not overwrite pointers to
previously allocated memory.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/auth_gss.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 9463af4b32e8..1281b967dbf9 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -1736,6 +1736,7 @@ priv_release_snd_buf(struct rpc_rqst *rqstp)
 	for (i=0; i < rqstp->rq_enc_pages_num; i++)
 		__free_page(rqstp->rq_enc_pages[i]);
 	kfree(rqstp->rq_enc_pages);
+	rqstp->rq_release_snd_buf = NULL;
 }
 
 static int
@@ -1744,6 +1745,9 @@ alloc_enc_pages(struct rpc_rqst *rqstp)
 	struct xdr_buf *snd_buf = &rqstp->rq_snd_buf;
 	int first, last, i;
 
+	if (rqstp->rq_release_snd_buf)
+		rqstp->rq_release_snd_buf(rqstp);
+
 	if (snd_buf->page_len == 0) {
 		rqstp->rq_enc_pages_num = 0;
 		return 0;
-- 
2.19.1

[PATCH AUTOSEL 4.14 12/41] SUNRPC: Fix a potential race in xprt_connect()

[Sasha Levin]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 0a9a4304f3614e25d9de9b63502ca633c01c0d70 ]

If an asynchronous connection attempt completes while another task is
in xprt_connect(), then the call to rpc_sleep_on() could end up
racing with the call to xprt_wake_pending_tasks().
So add a second test of the connection state after we've put the
task to sleep and set the XPRT_CONNECTING flag, when we know that there
can be no asynchronous connection attempts still in progress.

Fixes: 0b9e79431377d ("SUNRPC: Move the test for XPRT_CONNECTING into...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprt.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 8eb0c4f3b3e9..d0282cc88b14 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -780,8 +780,15 @@ void xprt_connect(struct rpc_task *task)
 			return;
 		if (xprt_test_and_set_connecting(xprt))
 			return;
-		xprt->stat.connect_start = jiffies;
-		xprt->ops->connect(xprt, task);
+		/* Race breaker */
+		if (!xprt_connected(xprt)) {
+			xprt->stat.connect_start = jiffies;
+			xprt->ops->connect(xprt, task);
+		} else {
+			xprt_clear_connecting(xprt);
+			task->tk_status = 0;
+			rpc_wake_up_queued_task(&xprt->pending, task);
+		}
 	}
 	xprt_release_write(xprt, task);
 }
-- 
2.19.1

[PATCH AUTOSEL 4.14 23/41] net: phy: don't allow __set_phy_supported to add unsupported modes

[Sasha Levin]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit d2a36971ef595069b7a600d1144c2e0881a930a1 ]

Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.

The commit marked as fixed didn't do anything wrong, it just copied
existing functionality to the helper which is being fixed now.

Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index fe76e2c4022a..5b56a86e88ff 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1703,20 +1703,17 @@ EXPORT_SYMBOL(genphy_loopback);
 
 static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
 {
-	phydev->supported &= ~(PHY_1000BT_FEATURES | PHY_100BT_FEATURES |
-			       PHY_10BT_FEATURES);
-
 	switch (max_speed) {
-	default:
-		return -ENOTSUPP;
-	case SPEED_1000:
-		phydev->supported |= PHY_1000BT_FEATURES;
+	case SPEED_10:
+		phydev->supported &= ~PHY_100BT_FEATURES;
 		/* fall through */
 	case SPEED_100:
-		phydev->supported |= PHY_100BT_FEATURES;
-		/* fall through */
-	case SPEED_10:
-		phydev->supported |= PHY_10BT_FEATURES;
+		phydev->supported &= ~PHY_1000BT_FEATURES;
+		break;
+	case SPEED_1000:
+		break;
+	default:
+		return -ENOTSUPP;
 	}
 
 	return 0;
-- 
2.19.1

[PATCH AUTOSEL 4.14 24/41] net: 8139cp: fix a BUG triggered by changing mtu with network traffic

[Sasha Levin]

From: Su Yanjun <suyj.fnst@cn.fujitsu.com>

[ Upstream commit a5d4a89245ead1f37ed135213653c5beebea4237 ]

When changing mtu many times with traffic, a bug is triggered:

[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26!
[ 1035.684042] invalid opcode: 0000 [#1] SMP
[ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec
tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp
fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun
bridge stp llc ebtable_filter ebtables ip6table_filter devlink
ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul
parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm
aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper
ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs
libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic
[ 1035.684102]  pata_acpi virtio_console qxl drm_kms_helper syscopyarea
sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul
crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too
virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror
dm_region_hash dm_log dm_mod [last unloaded: 8139cp]
[ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded
Tainted: G           OE  ------------ T 3.10.0-957.el7.x86_64 #1
[ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti:
ffff8f5a2e32c000
[ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>]  [<ffffffffba3a40d0>]
dql_completed+0x180/0x190
[ 1035.684162] RSP: 0000:ffff8f5a75483e50  EFLAGS: 00010093
[ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX:
0000000000000000
[ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI:
ffff8f599fea3ec0
[ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09:
0000000000000000
[ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12:
ffff8f599fea3e00
[ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15:
0000000000000184
[ 1035.684162] FS:  00007fa8434de740(0000) GS:ffff8f5a75480000(0000)
knlGS:0000000000000000
[ 1035.684162] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4:
00000000001406e0
[ 1035.684162] Call Trace:
[ 1035.684162]  <IRQ>
[ 1035.684162]  [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp]
[ 1035.684162]  [<ffffffffba14a294>]
__handle_irq_event_percpu+0x44/0x1c0
[ 1035.684162]  [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80
[ 1035.684162]  [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60
[ 1035.684162]  [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110
[ 1035.684162]  [<ffffffffba02e554>] handle_irq+0xe4/0x1a0
[ 1035.684162]  [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0
[ 1035.684162]  [<ffffffffba76b362>] common_interrupt+0x162/0x162
[ 1035.684162]  <EOI>
[ 1035.684162]  [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70
[ 1035.684162]  [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120
[ 1035.684162]  [<ffffffffba1b64fb>] unlock_page+0x2b/0x30
[ 1035.684162]  [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0
[ 1035.684162]  [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10
[ 1035.684162]  [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0
[ 1035.684162]  [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500
[ 1035.684162]  [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150
[ 1035.684162]  [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0
[ 1035.684162]  [<ffffffffba76b788>] async_page_fault+0x28/0x30
[ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f
9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe
ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48
[ 1035.684162] RIP  [<ffffffffba3a40d0>] dql_completed+0x180/0x190
[ 1035.684162]  RSP <ffff8f5a75483e50>

It's not the same as in 7fe0ee09 patch described.
As 8139cp uses shared irq mode, other device irq will trigger
cp_interrupt to execute.

cp_change_mtu
 -> cp_close
 -> cp_open

In cp_close routine  just before free_irq(), some interrupt may occur.
In my environment, cp_interrupt exectutes and IntrStatus is 0x4,
exactly TxOk. That will cause cp_tx to wake device queue.

As device queue is started, cp_start_xmit and cp_open will run at same
time which will cause kernel BUG.

For example:
[#] for tx descriptor

At start:

[#][#][#]
num_queued=3

After cp_init_hw->cp_start_hw->netdev_reset_queue:

[#][#][#]
num_queued=0

When 8139cp starts to work then cp_tx will check
num_queued mismatchs the complete_bytes.

The patch will check IntrMask before check IntrStatus in cp_interrupt.
When 8139cp interrupt is disabled, just return.

Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/8139cp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index e7ab23e87de2..d1e88712a275 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -571,6 +571,7 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 	struct cp_private *cp;
 	int handled = 0;
 	u16 status;
+	u16 mask;
 
 	if (unlikely(dev == NULL))
 		return IRQ_NONE;
@@ -578,6 +579,10 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 
 	spin_lock(&cp->lock);
 
+	mask = cpr16(IntrMask);
+	if (!mask)
+		goto out_unlock;
+
 	status = cpr16(IntrStatus);
 	if (!status || (status == 0xFFFF))
 		goto out_unlock;
-- 
2.19.1

[PATCH AUTOSEL 4.14 25/41] net: phy: Fix not to call phy_resume() if PHY is not attached

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ]

This patch fixes an issue that mdio_bus_phy_resume() doesn't call
phy_resume() if the PHY is not attached.

Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 5b56a86e88ff..7830777b3595 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -76,7 +76,7 @@ static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
 
 #ifdef CONFIG_PM
-static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
+static bool mdio_bus_phy_may_suspend(struct phy_device *phydev, bool suspend)
 {
 	struct device_driver *drv = phydev->mdio.dev.driver;
 	struct phy_driver *phydrv = to_phy_driver(drv);
@@ -88,10 +88,11 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
 	/* PHY not attached? May suspend if the PHY has not already been
 	 * suspended as part of a prior call to phy_disconnect() ->
 	 * phy_detach() -> phy_suspend() because the parent netdev might be the
-	 * MDIO bus driver and clock gated at this point.
+	 * MDIO bus driver and clock gated at this point. Also may resume if
+	 * PHY is not attached.
 	 */
 	if (!netdev)
-		return !phydev->suspended;
+		return suspend ? !phydev->suspended : phydev->suspended;
 
 	/* Don't suspend PHY if the attached netdev parent may wakeup.
 	 * The parent may point to a PCI device, as in tg3 driver.
@@ -121,7 +122,7 @@ static int mdio_bus_phy_suspend(struct device *dev)
 	if (phydev->attached_dev && phydev->adjust_link)
 		phy_stop_machine(phydev);
 
-	if (!mdio_bus_phy_may_suspend(phydev))
+	if (!mdio_bus_phy_may_suspend(phydev, true))
 		return 0;
 
 	return phy_suspend(phydev);
@@ -132,7 +133,7 @@ static int mdio_bus_phy_resume(struct device *dev)
 	struct phy_device *phydev = to_phy_device(dev);
 	int ret;
 
-	if (!mdio_bus_phy_may_suspend(phydev))
+	if (!mdio_bus_phy_may_suspend(phydev, false))
 		goto no_resume;
 
 	ret = phy_resume(phydev);
-- 
2.19.1

RE: [PATCH AUTOSEL 4.14 25/41] net: phy: Fix not to call phy_resume() if PHY is not attached

[Yoshihiro Shimoda]

Hi,

> From: Sasha Levin, Sent: Thursday, December 13, 2018 1:31 PM
> 
> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> 
> [ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ]

This upstream commit is also reverted on mainline
as I mentioned other email thread [1]. So, we should not backport this patch.

[1]
https://lore.kernel.org/lkml/OSAPR01MB2290FE36AF50B2F29170383DD8A00@OSAPR01MB2290.jpnprd01.prod.outlook.com/T/#u

Best regards,
Yoshihiro Shimoda

[PATCH AUTOSEL 4.14 26/41] mv88e6060: disable hardware level MAC learning

[Sasha Levin]

From: Anderson Luiz Alves <alacn1@gmail.com>

[ Upstream commit a74515604a7b171f2702bdcbd1e231225fb456d0 ]

Disable hardware level MAC learning because it breaks station roaming.
When enabled it drops all frames that arrive from a MAC address
that is on a different port at learning table.

Signed-off-by: Anderson Luiz Alves <alacn1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6060.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index f123ed57630d..86b41840f41a 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -114,8 +114,7 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
 	/* Reset the switch. */
 	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
 		  GLOBAL_ATU_CONTROL_SWRESET |
-		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
-		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
+		  GLOBAL_ATU_CONTROL_LEARNDIS);
 
 	/* Wait up to one second for reset to complete. */
 	timeout = jiffies + 1 * HZ;
@@ -140,13 +139,10 @@ static int mv88e6060_setup_global(struct dsa_switch *ds)
 	 */
 	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
 
-	/* Enable automatic address learning, set the address
-	 * database size to 1024 entries, and set the default aging
-	 * time to 5 minutes.
+	/* Disable automatic address learning.
 	 */
 	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
-		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
-		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
+		  GLOBAL_ATU_CONTROL_LEARNDIS);
 
 	return 0;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.14 27/41] net/mlx4_en: Change min MTU size to ETH_MIN_MTU

[Sasha Levin]

From: Eran Ben Elisha <eranbe@mellanox.com>

[ Upstream commit 24be19e47779d604d1492c114459dca9a92acf78 ]

NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in
the RFC791 and in the network stack. Remove old mlx4_en only define for
it, which was set to wrong value.

Fixes: b80f71f5816f ("ethernet/mellanox: use core min/max MTU checking")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ++--
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   | 1 -
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index faa4bd21f148..0fb85d71c11b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -3505,8 +3505,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 		dev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM;
 	}
 
-	/* MTU range: 46 - hw-specific max */
-	dev->min_mtu = MLX4_EN_MIN_MTU;
+	/* MTU range: 68 - hw-specific max */
+	dev->min_mtu = ETH_MIN_MTU;
 	dev->max_mtu = priv->max_mtu;
 
 	mdev->pndev[port] = dev;
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 09f4764a3f39..bdd87438a354 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -157,7 +157,6 @@
 #define HEADER_COPY_SIZE       (128 - NET_IP_ALIGN)
 #define MLX4_LOOPBACK_TEST_PAYLOAD (HEADER_COPY_SIZE - ETH_HLEN)
 
-#define MLX4_EN_MIN_MTU		46
 /* VLAN_HLEN is added twice,to support skb vlan tagged with multiple
  * headers. (For example: ETH_P_8021Q and ETH_P_8021AD).
  */
-- 
2.19.1

[PATCH AUTOSEL 4.14 28/41] net/mlx4_en: Fix build break when CONFIG_INET is off

[Sasha Levin]

From: Saeed Mahameed <saeedm@mellanox.com>

[ Upstream commit 1b603f9e4313348608f256b564ed6e3d9e67f377 ]

MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs.
Make sure they are listed in MLX4_EN Kconfig dependencies.

This fixes the following build break:

drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default]
struct iphdr *iph)
^
drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’:
drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type
_u8 ipproto = iph->protocol;

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
index 22b1cc012bc9..c1a39be0dbe7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -5,7 +5,7 @@
 config MLX4_EN
 	tristate "Mellanox Technologies 1/10/40Gbit Ethernet support"
 	depends on MAY_USE_DEVLINK
-	depends on PCI
+	depends on PCI && NETDEVICES && ETHERNET && INET
 	select MLX4_CORE
 	imply PTP_1588_CLOCK
 	---help---
-- 
2.19.1

[PATCH AUTOSEL 4.14 31/41] ethernet: fman: fix wrong of_node_put() in probe function

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit ecb239d96d369c23c33d41708646df646de669f4 ]

After getting a reference to the platform device's of_node the probe
function ends up calling of_find_matching_node() using the node as an
argument. The function takes care of decreasing the refcount on it. We
are then incorrectly decreasing the refcount on that node again.

This patch removes the unwarranted call to of_node_put().

Fixes: 414fd46e7762 ("fsl/fman: Add FMan support")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fman/fman.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c
index 9530405030a7..97425d94e280 100644
--- a/drivers/net/ethernet/freescale/fman/fman.c
+++ b/drivers/net/ethernet/freescale/fman/fman.c
@@ -2786,7 +2786,7 @@ static struct fman *read_dts_node(struct platform_device *of_dev)
 	if (!muram_node) {
 		dev_err(&of_dev->dev, "%s: could not find MURAM node\n",
 			__func__);
-		goto fman_node_put;
+		goto fman_free;
 	}
 
 	err = of_address_to_resource(muram_node, 0,
@@ -2795,11 +2795,10 @@ static struct fman *read_dts_node(struct platform_device *of_dev)
 		of_node_put(muram_node);
 		dev_err(&of_dev->dev, "%s: of_address_to_resource() = %d\n",
 			__func__, err);
-		goto fman_node_put;
+		goto fman_free;
 	}
 
 	of_node_put(muram_node);
-	of_node_put(fm_node);
 
 	err = devm_request_irq(&of_dev->dev, irq, fman_irq, 0, "fman", fman);
 	if (err < 0) {
-- 
2.19.1

[PATCH AUTOSEL 4.14 34/41] vhost/vsock: fix reset orphans race with close timeout

[Sasha Levin]

From: Stefan Hajnoczi <stefanha@redhat.com>

[ Upstream commit c38f57da428b033f2721b611d84b1f40bde674a8 ]

If a local process has closed a connected socket and hasn't received a
RST packet yet, then the socket remains in the table until a timeout
expires.

When a vhost_vsock instance is released with the timeout still pending,
the socket is never freed because vhost_vsock has already set the
SOCK_DONE flag.

Check if the close timer is pending and let it close the socket.  This
prevents the race which can leak sockets.

Reported-by: Maximilian Riemensberger <riemensberger@cadami.net>
Cc: Graham Whaley <graham.whaley@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/vsock.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index c9de9c41aa97..fb14e7641e23 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -561,13 +561,21 @@ static void vhost_vsock_reset_orphans(struct sock *sk)
 	 * executing.
 	 */
 
-	if (!vhost_vsock_get(vsk->remote_addr.svm_cid)) {
-		sock_set_flag(sk, SOCK_DONE);
-		vsk->peer_shutdown = SHUTDOWN_MASK;
-		sk->sk_state = SS_UNCONNECTED;
-		sk->sk_err = ECONNRESET;
-		sk->sk_error_report(sk);
-	}
+	/* If the peer is still valid, no need to reset connection */
+	if (vhost_vsock_get(vsk->remote_addr.svm_cid))
+		return;
+
+	/* If the close timeout is pending, let it expire.  This avoids races
+	 * with the timeout callback.
+	 */
+	if (vsk->close_work_scheduled)
+		return;
+
+	sock_set_flag(sk, SOCK_DONE);
+	vsk->peer_shutdown = SHUTDOWN_MASK;
+	sk->sk_state = SS_UNCONNECTED;
+	sk->sk_err = ECONNRESET;
+	sk->sk_error_report(sk);
 }
 
 static int vhost_vsock_dev_release(struct inode *inode, struct file *file)
-- 
2.19.1

[PATCH AUTOSEL 4.14 35/41] mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 993107fea5eefdfdfde1ca38d3f01f0bebf76e77 ]

When deleting a VLAN device using an ioctl the netdev is unregistered
before the VLAN filter is updated via ndo_vlan_rx_kill_vid(). It can
lead to a use-after-free in mlxsw in case the VLAN device is deleted
while being enslaved to a bridge.

The reason for the above is that when mlxsw receives the CHANGEUPPER
event, it wrongly assumes that the VLAN device is no longer its upper
and thus destroys the internal representation of the bridge port despite
the reference count being non-zero.

Fix this by checking if the VLAN device is our upper using its real
device. In net-next I'm going to remove this trick and instead make
mlxsw completely agnostic to the order of the events.

Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlxsw/spectrum_switchdev.c   | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index 32c25772f755..21611613f44c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -295,7 +295,13 @@ static bool
 mlxsw_sp_bridge_port_should_destroy(const struct mlxsw_sp_bridge_port *
 				    bridge_port)
 {
-	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(bridge_port->dev);
+	struct net_device *dev = bridge_port->dev;
+	struct mlxsw_sp *mlxsw_sp;
+
+	if (is_vlan_dev(dev))
+		mlxsw_sp = mlxsw_sp_lower_get(vlan_dev_real_dev(dev));
+	else
+		mlxsw_sp = mlxsw_sp_lower_get(dev);
 
 	/* In case ports were pulled from out of a bridged LAG, then
 	 * it's possible the reference count isn't zero, yet the bridge
@@ -1646,7 +1652,7 @@ mlxsw_sp_bridge_8021d_port_leave(struct mlxsw_sp_bridge_device *bridge_device,
 	u16 vid = vlan_dev_vlan_id(bridge_port->dev);
 
 	mlxsw_sp_port_vlan = mlxsw_sp_port_vlan_find_by_vid(mlxsw_sp_port, vid);
-	if (WARN_ON(!mlxsw_sp_port_vlan))
+	if (!mlxsw_sp_port_vlan)
 		return;
 
 	mlxsw_sp_port_vlan_bridge_leave(mlxsw_sp_port_vlan);
-- 
2.19.1

[PATCH AUTOSEL 4.14 41/41] net/mlx4_core: Correctly set PFC param if global pause is turned off.

[Sasha Levin]

From: Tarick Bedeir <tarick@google.com>

[ Upstream commit bd5122cd1e0644d8bd8dd84517c932773e999766 ]

rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1.

Fixes: 6e8814ceb7e8 ("net/mlx4_en: Fix mixed PFC and Global pause user control requests")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index 5fe56dc4cfae..5363cee88a0a 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -1070,8 +1070,8 @@ static int mlx4_en_set_pauseparam(struct net_device *dev,
 
 	tx_pause = !!(pause->tx_pause);
 	rx_pause = !!(pause->rx_pause);
-	rx_ppp = priv->prof->rx_ppp && !(tx_pause || rx_pause);
-	tx_ppp = priv->prof->tx_ppp && !(tx_pause || rx_pause);
+	rx_ppp = (tx_pause || rx_pause) ? 0 : priv->prof->rx_ppp;
+	tx_ppp = (tx_pause || rx_pause) ? 0 : priv->prof->tx_ppp;
 
 	err = mlx4_SET_PORT_general(mdev->dev, priv->port,
 				    priv->rx_skb_size + ETH_FCS_LEN,
-- 
2.19.1

Re: [PATCH AUTOSEL 4.14 01/41] mac80211_hwsim: fix module init error paths for netlink

[Kalle Valo]

Sasha Levin <sashal@kernel.org> writes:

> From: Alexey Khoroshilov <khoroshilov@ispras.ru>
>
> [ Upstream commit 05cc09de4c017663a217630682041066f2f9a5cd ]
>
> There is no unregister netlink notifier and family on error paths
> in init_mac80211_hwsim(). Also there is an error path where
> hwsim_class is not destroyed.
>
> Found by Linux Driver Verification project (linuxtesting.org).
>
> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
> Fixes: 62759361eb49 ("mac80211-hwsim: Provide multicast event for HWSIM_CMD_NEW_RADIO")
> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

BTW, thanks for adding "X-Patchwork-Hint: Ignore" to the headers. I
don't see this patch in patchwork and that helps me a lot :)

-- 
Kalle Valo