[RFT][PATCH 5/7] net: dsa: microchip: Factor out register access opcode generation

[Marek Vasut <marex@denx.de>]

Factor out the code which sends out the register read/write opcodes
to the switch, since the code differs in single bit between read and
write.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <Woojung.Huh@microchip.com>
---
 drivers/net/dsa/microchip/ksz9477_spi.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c
index 69baf9677def..4fc36dc2195a 100644
--- a/drivers/net/dsa/microchip/ksz9477_spi.c
+++ b/drivers/net/dsa/microchip/ksz9477_spi.c
@@ -25,19 +25,24 @@
 /* Enough to read all switch port registers. */
 #define SPI_TX_BUF_LEN			0x100
 
-static int ksz9477_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
-				unsigned int len)
+static u32 ksz9477_spi_cmd(u32 reg, bool read)
 {
 	u32 txbuf;
-	int ret;
 
 	txbuf = reg & SPI_ADDR_MASK;
-	txbuf |= KS_SPIOP_RD << SPI_ADDR_SHIFT;
+	txbuf |= (read ? KS_SPIOP_RD : KS_SPIOP_WR) << SPI_ADDR_SHIFT;
 	txbuf <<= SPI_TURNAROUND_SHIFT;
 	txbuf = cpu_to_be32(txbuf);
 
-	ret = spi_write_then_read(spi, &txbuf, 4, val, len);
-	return ret;
+	return txbuf;
+}
+
+static int ksz9477_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
+				unsigned int len)
+{
+	u32 txbuf = ksz9477_spi_cmd(reg, true);
+
+	return spi_write_then_read(spi, &txbuf, 4, val, len);
 }
 
 static int ksz9477_spi_write_reg(struct spi_device *spi, u32 reg, u8 *val,
@@ -45,10 +50,7 @@ static int ksz9477_spi_write_reg(struct spi_device *spi, u32 reg, u8 *val,
 {
 	u32 *txbuf = (u32 *)val;
 
-	*txbuf = reg & SPI_ADDR_MASK;
-	*txbuf |= (KS_SPIOP_WR << SPI_ADDR_SHIFT);
-	*txbuf <<= SPI_TURNAROUND_SHIFT;
-	*txbuf = cpu_to_be32(*txbuf);
+	*txbuf = ksz9477_spi_cmd(reg, false);
 
 	return spi_write(spi, txbuf, 4 + len);
 }
-- 
2.19.2