From: Andrew Lunn <andrew@lunn.ch>
To: John Rama <john.rama01@gmail.com>
Cc: netdev@vger.kernel.org
Subject: Re: dsa: how to set external PHY address of slave MDIO bus
Date: Fri, 21 Dec 2018 10:56:32 +0100 [thread overview]
Message-ID: <20181221095632.GC5023@lunn.ch> (raw)
In-Reply-To: <5C1C4160.5080404@gmail.com>
On Thu, Dec 20, 2018 at 08:26:56PM -0500, John Rama wrote:
> Hi, Guys,
>
> I have one question. I'm working following configuration, and implementing a device driver.
> Basically, port 1-7 is working fine. I'm now having problem on port8.
>
> - System
> - i.MX6 and Marvel 88q5050 Switch(PHY addr is 0x10)
> - port1-5 has integrated PHY
> - port7 is connected to Marvel 88e1510 PHY(PHY addr is 0x1)
> - port8 is connected to Marvel 88e1510 PHY(PHY addr is 0x0),
> but it's the slave of MDIO bus whose master is the switch.
>
> 0x10
> +------------+ +-----------------+
> | | | Marvel 88q5050 |
> | | RGMII | port1 |
> | IMX6 +---------+ port6 |
> | | | port2 |
> | | MDIO | |
> | +-+-------+ port3 |
> | | | | |
> +------------+ | | port4 |
> | | |
> +-+-+ | port5 | +---+
> | |SGMII| |RGMII| |
> |PHY|-----| port7 port8 +-----+PHY+
> | | | |MDIO | |
> +---+ | +-----+ |
> Marvel 88e1510 +-----------------+ +---+
> 0x1 Marvel 88e1510
> 0x0
>
> - Question
> In the system above, how should we tell DSA driver the PHY address of the PHY which is connected to port8 ?
Hi John
Use a phy-handle in the port properties.
Andrew
next prev parent reply other threads:[~2018-12-21 9:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-21 1:26 dsa: how to set external PHY address of slave MDIO bus John Rama
2018-12-21 9:56 ` Andrew Lunn [this message]
2018-12-21 23:23 ` John Rama
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181221095632.GC5023@lunn.ch \
--to=andrew@lunn.ch \
--cc=john.rama01@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).