From: Vinod Koul <vkoul@kernel.org>
To: David S Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Niklas Cassel <niklas.cassel@linaro.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>
Subject: [PATCH v2 5/5] net: dsa: qca8k: disable delay for RGMII mode
Date: Tue, 8 Jan 2019 21:59:26 +0530 [thread overview]
Message-ID: <20190108162926.17806-6-vkoul@kernel.org> (raw)
In-Reply-To: <20190108162926.17806-1-vkoul@kernel.org>
In RGMII mode we should not have any delay in phy, so disable
the delay.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/net/dsa/qca8k.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 7e97e620bd44..a4b6cda38016 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -420,7 +420,7 @@ qca8k_mib_init(struct qca8k_priv *priv)
static int
qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
{
- u32 reg;
+ u32 reg, val;
switch (port) {
case 0:
@@ -439,17 +439,9 @@ qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode)
*/
switch (mode) {
case PHY_INTERFACE_MODE_RGMII:
- qca8k_write(priv, reg,
- QCA8K_PORT_PAD_RGMII_EN |
- QCA8K_PORT_PAD_RGMII_TX_DELAY(3) |
- QCA8K_PORT_PAD_RGMII_RX_DELAY(3));
-
- /* According to the datasheet, RGMII delay is enabled through
- * PORT5_PAD_CTRL for all ports, rather than individual port
- * registers
- */
- qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+ /* RGMII mode means no delay so don't enable the delay */
+ val = QCA8K_PORT_PAD_RGMII_EN;
+ qca8k_write(priv, reg, val);
break;
case PHY_INTERFACE_MODE_SGMII:
qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
--
2.20.1
next prev parent reply other threads:[~2019-01-08 16:32 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-08 16:29 [PATCH v2 0/5] net: Add support for Qualcomm ethqos Vinod Koul
2019-01-08 16:29 ` [PATCH v2 1/5] dt-bindings: net: Add Qualcomm ethqos binding Vinod Koul
2019-01-15 21:03 ` Rob Herring
2019-01-17 4:03 ` Vinod Koul
2019-01-08 16:29 ` [PATCH v2 2/5] net: stmmac: Add driver for Qualcomm ethqos Vinod Koul
2019-01-08 16:29 ` [PATCH v2 3/5] MAINTAINER: Add entry for Qualcomm ETHQOS ethernet driver Vinod Koul
2019-01-08 16:29 ` [PATCH v2 4/5] net: phy: at803x: Disable phy delay for RGMII mode Vinod Koul
2019-01-08 17:59 ` Florian Fainelli
2019-01-09 4:35 ` Vinod Koul
2019-01-08 16:29 ` Vinod Koul [this message]
2019-01-08 18:00 ` [PATCH v2 5/5] net: dsa: qca8k: disable " Florian Fainelli
2019-01-09 4:43 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190108162926.17806-6-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=andrew@lunn.ch \
--cc=bjorn.andersson@linaro.org \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=niklas.cassel@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).