[PATCH net-next 02/14] net: dsa: b53: Fix default VLAN ID

[Florian Fainelli <f.fainelli@gmail.com>]

We were not consistent in how the default VID of a given port was
defined, b53_br_leave() would make sure the VLAN ID would be either 0/1
depending on the switch generation, but b53_configure_vlan(), which is
the default configuration would unconditionally set it to 1. The correct
value is 1 for 5325/5365 series and 0 otherwise. To avoid repeating that
mistake ever again, introduce a helper function: b53_default_pvid() to
factor that out.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 0e4bbdcc614f..964a9ec4652a 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -632,15 +632,25 @@ static void b53_enable_mib(struct b53_device *dev)
 	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
 }
 
+static u16 b53_default_pvid(struct b53_device *dev)
+{
+	if (is5325(dev) || is5365(dev))
+		return 1;
+	else
+		return 0;
+}
+
 int b53_configure_vlan(struct dsa_switch *ds)
 {
 	struct b53_device *dev = ds->priv;
 	struct b53_vlan vl = { 0 };
-	int i;
+	int i, def_vid;
+
+	def_vid = b53_default_pvid(dev);
 
 	/* clear all vlan entries */
 	if (is5325(dev) || is5365(dev)) {
-		for (i = 1; i < dev->num_vlans; i++)
+		for (i = def_vid; i < dev->num_vlans; i++)
 			b53_set_vlan_entry(dev, i, &vl);
 	} else {
 		b53_do_vlan_op(dev, VTA_CMD_CLEAR);
@@ -650,7 +660,7 @@ int b53_configure_vlan(struct dsa_switch *ds)
 
 	b53_for_each_port(dev, i)
 		b53_write16(dev, B53_VLAN_PAGE,
-			    B53_VLAN_PORT_DEF_TAG(i), 1);
+			    B53_VLAN_PORT_DEF_TAG(i), def_vid);
 
 	if (!is5325(dev) && !is5365(dev))
 		b53_set_jumbo(dev, dev->enable_jumbo, false);
@@ -1326,12 +1336,8 @@ int b53_vlan_del(struct dsa_switch *ds, int port,
 
 		vl->members &= ~BIT(port);
 
-		if (pvid == vid) {
-			if (is5325(dev) || is5365(dev))
-				pvid = 1;
-			else
-				pvid = 0;
-		}
+		if (pvid == vid)
+			pvid = b53_default_pvid(dev);
 
 		if (untagged && !dsa_is_cpu_port(ds, port))
 			vl->untag &= ~(BIT(port));
@@ -1644,10 +1650,7 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
 	dev->ports[port].vlan_ctl_mask = pvlan;
 
-	if (is5325(dev) || is5365(dev))
-		pvid = 1;
-	else
-		pvid = 0;
+	pvid = b53_default_pvid(dev);
 
 	/* Make this port join all VLANs without VLAN entries */
 	if (is58xx(dev)) {
-- 
2.17.1