Netdev List
 help / color / mirror / Atom feed
From: Artem Panfilov <panfilov.artyom@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Artem Panfilov <panfilov.artyom@gmail.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	"David S. Miller" <davem@davemloft.net>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next 1/1] net: stmmac: implement the SIOCGHWTSTAMP ioctl
Date: Sun, 20 Jan 2019 19:05:15 +0300	[thread overview]
Message-ID: <20190120160515.26473-1-panfilov.artyom@gmail.com> (raw)

This patch adds support for the SIOCGHWTSTAMP ioctl which enables user
processes to read the current hwtstamp_config settings
non-destructively.

Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  2 ++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 36 ++++++++++++++++---
 2 files changed, 33 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 63e1064b27a2..f9b42b0c20f4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -28,6 +28,7 @@
 #include <linux/pci.h>
 #include "common.h"
 #include <linux/ptp_clock_kernel.h>
+#include <linux/net_tstamp.h>
 #include <linux/reset.h>
 
 struct stmmac_resources {
@@ -174,6 +175,7 @@ struct stmmac_priv {
 	unsigned int mode;
 	unsigned int chain_mode;
 	int extend_desc;
+	struct hwtstamp_config tstamp_config;
 	struct ptp_clock *ptp_clock;
 	struct ptp_clock_info ptp_clock_ops;
 	unsigned int default_addend;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 5afba69981cf..517555bcfa44 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -534,7 +534,7 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p,
 }
 
 /**
- *  stmmac_hwtstamp_ioctl - control hardware timestamping.
+ *  stmmac_hwtstamp_set - control hardware timestamping.
  *  @dev: device pointer.
  *  @ifr: An IOCTL specific structure, that can contain a pointer to
  *  a proprietary structure used to pass information to the driver.
@@ -544,7 +544,7 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p,
  *  Return Value:
  *  0 on success and an appropriate -ve integer on failure.
  */
-static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
+static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 	struct hwtstamp_config config;
@@ -573,7 +573,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
 	}
 
 	if (copy_from_user(&config, ifr->ifr_data,
-			   sizeof(struct hwtstamp_config)))
+			   sizeof(config)))
 		return -EFAULT;
 
 	netdev_dbg(priv->dev, "%s config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
@@ -765,8 +765,31 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
 				(u32)now.tv_sec, now.tv_nsec);
 	}
 
+	memcpy(&priv->tstamp_config, &config, sizeof(config));
+
 	return copy_to_user(ifr->ifr_data, &config,
-			    sizeof(struct hwtstamp_config)) ? -EFAULT : 0;
+			    sizeof(config)) ? -EFAULT : 0;
+}
+
+/**
+ *  stmmac_hwtstamp_get - read hardware timestamping.
+ *  @dev: device pointer.
+ *  @ifr: An IOCTL specific structure, that can contain a pointer to
+ *  a proprietary structure used to pass information to the driver.
+ *  Description:
+ *  This function obtain the current hardware timestamping settings
+    as requested.
+ */
+static int stmmac_hwtstamp_get(struct net_device *dev, struct ifreq *ifr)
+{
+	struct stmmac_priv *priv = netdev_priv(dev);
+	struct hwtstamp_config *config = &priv->tstamp_config;
+
+	if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
+		return -EOPNOTSUPP;
+
+	return copy_to_user(ifr->ifr_data, config,
+			    sizeof(*config)) ? -EFAULT : 0;
 }
 
 /**
@@ -3767,7 +3790,10 @@ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		ret = phy_mii_ioctl(dev->phydev, rq, cmd);
 		break;
 	case SIOCSHWTSTAMP:
-		ret = stmmac_hwtstamp_ioctl(dev, rq);
+		ret = stmmac_hwtstamp_set(dev, rq);
+		break;
+	case SIOCGHWTSTAMP:
+		ret = stmmac_hwtstamp_get(dev, rq);
 		break;
 	default:
 		break;
-- 
2.19.1


             reply	other threads:[~2019-01-20 16:06 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-20 16:05 Artem Panfilov [this message]
2019-01-23  1:37 ` [PATCH net-next 1/1] net: stmmac: implement the SIOCGHWTSTAMP ioctl David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190120160515.26473-1-panfilov.artyom@gmail.com \
    --to=panfilov.artyom@gmail.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=joabreu@synopsys.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox