[PATCH net 2/5] qed: Fix LACP pdu drops for VFs

[Manish Chopra <manishc@marvell.com>]

VF is always configured to drop control frames
(with reserved mac addresses) but to work LACP
on the VFs, it would require LACP control frames
to be forwarded or transmitted successfully.

This patch fixes this in such a way that trusted VFs
(marked through ndo_set_vf_trust) would be allowed to
pass the control frames such as LACP pdus.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
---
 drivers/net/ethernet/qlogic/qed/qed_l2.c    |  5 +++++
 drivers/net/ethernet/qlogic/qed/qed_l2.h    |  3 +++
 drivers/net/ethernet/qlogic/qed/qed_sriov.c | 10 ++++++++--
 3 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index b8baa6fc..e68ca83 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -748,6 +748,11 @@ int qed_sp_vport_update(struct qed_hwfn *p_hwfn,
 		return rc;
 	}
 
+	if (p_params->update_ctl_frame_check) {
+		p_cmn->ctl_frame_mac_check_en = p_params->mac_chk_en;
+		p_cmn->ctl_frame_ethtype_check_en = p_params->ethtype_chk_en;
+	}
+
 	/* Update mcast bins for VFs, PF doesn't use this functionality */
 	qed_sp_update_mcast_bin(p_hwfn, p_ramrod, p_params);
 
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h
index 8d80f10..7127d5a 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h
@@ -219,6 +219,9 @@ struct qed_sp_vport_update_params {
 	struct qed_rss_params		*rss_params;
 	struct qed_filter_accept_flags	accept_flags;
 	struct qed_sge_tpa_params	*sge_tpa_params;
+	u8				update_ctl_frame_check;
+	u8				mac_chk_en;
+	u8				ethtype_chk_en;
 };
 
 int qed_sp_vport_update(struct qed_hwfn *p_hwfn,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index ca6290f..71a7af1 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -1969,7 +1969,9 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn,
 	params.vport_id = vf->vport_id;
 	params.max_buffers_per_cqe = start->max_buffers_per_cqe;
 	params.mtu = vf->mtu;
-	params.check_mac = true;
+
+	/* Non trusted VFs should enable control frame filtering */
+	params.check_mac = !vf->p_vf_info.is_trusted_configured;
 
 	rc = qed_sp_eth_vport_start(p_hwfn, &params);
 	if (rc) {
@@ -5130,6 +5132,9 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn)
 		params.opaque_fid = vf->opaque_fid;
 		params.vport_id = vf->vport_id;
 
+		params.update_ctl_frame_check = 1;
+		params.mac_chk_en = !vf_info->is_trusted_configured;
+
 		if (vf_info->rx_accept_mode & mask) {
 			flags->update_rx_mode_config = 1;
 			flags->rx_accept_filter = vf_info->rx_accept_mode;
@@ -5147,7 +5152,8 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn)
 		}
 
 		if (flags->update_rx_mode_config ||
-		    flags->update_tx_mode_config)
+		    flags->update_tx_mode_config ||
+		    params.update_ctl_frame_check)
 			qed_sp_vport_update(hwfn, &params,
 					    QED_SPQ_MODE_EBLOCK, NULL);
 	}
-- 
1.8.3.1