From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, Florian Fainelli <f.fainelli@gmail.com>
Subject: [PATCH net] net: systemport: Fix WoL with password after deep sleep
Date: Fri, 1 Feb 2019 13:23:38 -0800 [thread overview]
Message-ID: <20190201212338.4449-1-f.fainelli@gmail.com> (raw)
Broadcom STB chips support a deep sleep mode where all register
contents are lost. Because we were stashing the MagicPacket password
into some of these registers a suspend into that deep sleep then a
resumption would not lead to being able to wake-up from MagicPacket with
password again.
Fix this by keeping a software copy of the password and program it
during suspend.
Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 25 +++++++++-------------
drivers/net/ethernet/broadcom/bcmsysport.h | 2 ++
2 files changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index f9521d0274b7..28c9b0bdf2f6 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -520,7 +520,6 @@ static void bcm_sysport_get_wol(struct net_device *dev,
struct ethtool_wolinfo *wol)
{
struct bcm_sysport_priv *priv = netdev_priv(dev);
- u32 reg;
wol->supported = WAKE_MAGIC | WAKE_MAGICSECURE | WAKE_FILTER;
wol->wolopts = priv->wolopts;
@@ -528,11 +527,7 @@ static void bcm_sysport_get_wol(struct net_device *dev,
if (!(priv->wolopts & WAKE_MAGICSECURE))
return;
- /* Return the programmed SecureOn password */
- reg = umac_readl(priv, UMAC_PSW_MS);
- put_unaligned_be16(reg, &wol->sopass[0]);
- reg = umac_readl(priv, UMAC_PSW_LS);
- put_unaligned_be32(reg, &wol->sopass[2]);
+ memcpy(wol->sopass, priv->sopass, sizeof(priv->sopass));
}
static int bcm_sysport_set_wol(struct net_device *dev,
@@ -548,13 +543,8 @@ static int bcm_sysport_set_wol(struct net_device *dev,
if (wol->wolopts & ~supported)
return -EINVAL;
- /* Program the SecureOn password */
- if (wol->wolopts & WAKE_MAGICSECURE) {
- umac_writel(priv, get_unaligned_be16(&wol->sopass[0]),
- UMAC_PSW_MS);
- umac_writel(priv, get_unaligned_be32(&wol->sopass[2]),
- UMAC_PSW_LS);
- }
+ if (wol->wolopts & WAKE_MAGICSECURE)
+ memcpy(priv->sopass, wol->sopass, sizeof(priv->sopass));
/* Flag the device and relevant IRQ as wakeup capable */
if (wol->wolopts) {
@@ -2649,13 +2639,18 @@ static int bcm_sysport_suspend_to_wol(struct bcm_sysport_priv *priv)
unsigned int index, i = 0;
u32 reg;
- /* Password has already been programmed */
reg = umac_readl(priv, UMAC_MPD_CTRL);
if (priv->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE))
reg |= MPD_EN;
reg &= ~PSW_EN;
- if (priv->wolopts & WAKE_MAGICSECURE)
+ if (priv->wolopts & WAKE_MAGICSECURE) {
+ /* Program the SecureOn password */
+ umac_writel(priv, get_unaligned_be16(&priv->sopass[0]),
+ UMAC_PSW_MS);
+ umac_writel(priv, get_unaligned_be32(&priv->sopass[2]),
+ UMAC_PSW_LS);
reg |= PSW_EN;
+ }
umac_writel(priv, reg, UMAC_MPD_CTRL);
if (priv->wolopts & WAKE_FILTER) {
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h
index 0887e6356649..0b192fea9c5d 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.h
+++ b/drivers/net/ethernet/broadcom/bcmsysport.h
@@ -12,6 +12,7 @@
#define __BCM_SYSPORT_H
#include <linux/bitmap.h>
+#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/net_dim.h>
@@ -778,6 +779,7 @@ struct bcm_sysport_priv {
unsigned int crc_fwd:1;
u16 rev;
u32 wolopts;
+ u8 sopass[SOPASS_MAX];
unsigned int wol_irq_disabled:1;
/* MIB related fields */
--
2.17.1
next reply other threads:[~2019-02-01 21:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-01 21:23 Florian Fainelli [this message]
2019-02-03 19:24 ` [PATCH net] net: systemport: Fix WoL with password after deep sleep David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190201212338.4449-1-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).