Netdev List
 help / color / mirror / Atom feed
From: Saeed Mahameed <saeedm@mellanox.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Huy Nguyen <huyn@mellanox.com>,
	Saeed Mahameed <saeedm@mellanox.com>
Subject: [net-next 9/9] net/mlx5: Support ndo bridge_setlink and getlink
Date: Fri, 22 Feb 2019 13:44:26 -0800	[thread overview]
Message-ID: <20190222214426.27833-10-saeedm@mellanox.com> (raw)
In-Reply-To: <20190222214426.27833-1-saeedm@mellanox.com>

From: Huy Nguyen <huyn@mellanox.com>

Allow enabling VEPA mode on the HCA's port in legacy devlink mode.

Example:
bridge link set dev ens1f0 hwmode vepa
will turn on VEPA mode on the netdev ens1f0.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 .../net/ethernet/mellanox/mlx5/core/en_main.c | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 4f971f3d8ce7..e5f74eb986b3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -35,6 +35,7 @@
 #include <linux/mlx5/fs.h>
 #include <net/vxlan.h>
 #include <linux/bpf.h>
+#include <linux/if_bridge.h>
 #include <net/page_pool.h>
 #include "eswitch.h"
 #include "en.h"
@@ -4305,6 +4306,61 @@ static int mlx5e_xdp(struct net_device *dev, struct netdev_bpf *xdp)
 	}
 }
 
+#ifdef CONFIG_MLX5_ESWITCH
+static int mlx5e_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
+				struct net_device *dev, u32 filter_mask,
+				int nlflags)
+{
+	struct mlx5e_priv *priv = netdev_priv(dev);
+	struct mlx5_core_dev *mdev = priv->mdev;
+	u8 mode, setting;
+	int err;
+
+	err = mlx5_eswitch_get_vepa(mdev->priv.eswitch, &setting);
+	if (err)
+		return err;
+	mode = setting ? BRIDGE_MODE_VEPA : BRIDGE_MODE_VEB;
+	return ndo_dflt_bridge_getlink(skb, pid, seq, dev,
+				       mode,
+				       0, 0, nlflags, filter_mask, NULL);
+}
+
+static int mlx5e_bridge_setlink(struct net_device *dev, struct nlmsghdr *nlh,
+				u16 flags, struct netlink_ext_ack *extack)
+{
+	struct mlx5e_priv *priv = netdev_priv(dev);
+	struct mlx5_core_dev *mdev = priv->mdev;
+	struct nlattr *attr, *br_spec;
+	u16 mode = BRIDGE_MODE_UNDEF;
+	u8 setting;
+	int rem;
+
+	br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
+	if (!br_spec)
+		return -EINVAL;
+
+	nla_for_each_nested(attr, br_spec, rem) {
+		if (nla_type(attr) != IFLA_BRIDGE_MODE)
+			continue;
+
+		if (nla_len(attr) < sizeof(mode))
+			return -EINVAL;
+
+		mode = nla_get_u16(attr);
+		if (mode > BRIDGE_MODE_VEPA)
+			return -EINVAL;
+
+		break;
+	}
+
+	if (mode == BRIDGE_MODE_UNDEF)
+		return -EINVAL;
+
+	setting = (mode == BRIDGE_MODE_VEPA) ?  1 : 0;
+	return mlx5_eswitch_set_vepa(mdev->priv.eswitch, setting);
+}
+#endif
+
 const struct net_device_ops mlx5e_netdev_ops = {
 	.ndo_open                = mlx5e_open,
 	.ndo_stop                = mlx5e_close,
@@ -4331,6 +4387,9 @@ const struct net_device_ops mlx5e_netdev_ops = {
 	.ndo_rx_flow_steer	 = mlx5e_rx_flow_steer,
 #endif
 #ifdef CONFIG_MLX5_ESWITCH
+	.ndo_bridge_setlink      = mlx5e_bridge_setlink,
+	.ndo_bridge_getlink      = mlx5e_bridge_getlink,
+
 	/* SRIOV E-Switch NDOs */
 	.ndo_set_vf_mac          = mlx5e_set_vf_mac,
 	.ndo_set_vf_vlan         = mlx5e_set_vf_vlan,
-- 
2.20.1


  parent reply	other threads:[~2019-02-22 21:45 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-22 21:44 [pull request][net-next 0/9] Mellanox, mlx5 updates 2019-02-21 Saeed Mahameed
2019-02-22 21:44 ` [net-next 1/9] net/mlx5: Use read-modify-write when changing PCMR register values Saeed Mahameed
2019-02-22 21:44 ` [net-next 2/9] net/mlx5: Introduce tunnel entropy control in PCMR register Saeed Mahameed
2019-02-22 21:44 ` [net-next 3/9] net/mlx5e: Fix GRE key by controlling port tunnel entropy calculation Saeed Mahameed
2019-02-22 21:44 ` [net-next 4/9] net/mlx5e: Fix warn print in case of TX reporter creation failure Saeed Mahameed
2019-02-22 21:44 ` [net-next 5/9] net/mlx5e: Re-add support for TX timeout when TX reporter is not valid Saeed Mahameed
2019-02-22 21:44 ` [net-next 6/9] net/mlx5e: Fix return status of TX reporter timeout recover Saeed Mahameed
2019-02-22 21:44 ` [net-next 7/9] net/mlx5e: Fix mlx5e_tx_reporter_create return value Saeed Mahameed
2019-02-22 21:44 ` [net-next 8/9] net/mlx5: E-Switch, Add support for VEPA in legacy mode Saeed Mahameed
2019-02-22 21:44 ` Saeed Mahameed [this message]
2019-02-23 21:56 ` [pull request][net-next 0/9] Mellanox, mlx5 updates 2019-02-21 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190222214426.27833-10-saeedm@mellanox.com \
    --to=saeedm@mellanox.com \
    --cc=davem@davemloft.net \
    --cc=huyn@mellanox.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox