From: Ursula Braun <ubraun@linux.ibm.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-s390@vger.kernel.org,
schwidefsky@de.ibm.com, heiko.carstens@de.ibm.com,
raspl@linux.ibm.com, kgraul@linux.ibm.com, ubraun@linux.ibm.com
Subject: [PATCH net-next 1/1] net/smc: allow pnetid-less configuration
Date: Thu, 28 Feb 2019 15:10:08 +0100 [thread overview]
Message-ID: <20190228141008.16458-1-ubraun@linux.ibm.com> (raw)
Without hardware pnetid support there must currently be a pnet
table configured to determine the IB device port to be used for SMC
RDMA traffic. This patch enables a setup without pnet table, if
the used handshake interface belongs already to a RoCE port.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
---
net/smc/smc_pnet.c | 42 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 41 insertions(+), 1 deletion(-)
diff --git a/net/smc/smc_pnet.c b/net/smc/smc_pnet.c
index 25dfbe343e26..8d2f6296279c 100644
--- a/net/smc/smc_pnet.c
+++ b/net/smc/smc_pnet.c
@@ -754,9 +754,47 @@ static int smc_pnet_find_ndev_pnetid_by_table(struct net_device *ndev,
return rc;
}
+/* if handshake network device belongs to a roce device, return its
+ * IB device and port
+ */
+static void smc_pnet_find_rdma_dev(struct net_device *netdev,
+ struct smc_ib_device **smcibdev,
+ u8 *ibport, unsigned short vlan_id, u8 gid[])
+{
+ struct smc_ib_device *ibdev;
+
+ spin_lock(&smc_ib_devices.lock);
+ list_for_each_entry(ibdev, &smc_ib_devices.list, list) {
+ struct net_device *ndev;
+ int i;
+
+ for (i = 1; i <= SMC_MAX_PORTS; i++) {
+ if (!rdma_is_port_valid(ibdev->ibdev, i))
+ continue;
+ if (!ibdev->ibdev->ops.get_netdev)
+ continue;
+ ndev = ibdev->ibdev->ops.get_netdev(ibdev->ibdev, i);
+ if (!ndev)
+ continue;
+ dev_put(ndev);
+ if (netdev == ndev &&
+ smc_ib_port_active(ibdev, i) &&
+ !smc_ib_determine_gid(ibdev, i, vlan_id, gid,
+ NULL)) {
+ *smcibdev = ibdev;
+ *ibport = i;
+ break;
+ }
+ }
+ }
+ spin_unlock(&smc_ib_devices.lock);
+}
+
/* Determine the corresponding IB device port based on the hardware PNETID.
* Searching stops at the first matching active IB device port with vlan_id
* configured.
+ * If nothing found, check pnetid table.
+ * If nothing found, try to use handshake device
*/
static void smc_pnet_find_roce_by_pnetid(struct net_device *ndev,
struct smc_ib_device **smcibdev,
@@ -770,8 +808,10 @@ static void smc_pnet_find_roce_by_pnetid(struct net_device *ndev,
ndev = pnet_find_base_ndev(ndev);
if (smc_pnetid_by_dev_port(ndev->dev.parent, ndev->dev_port,
ndev_pnetid) &&
- smc_pnet_find_ndev_pnetid_by_table(ndev, ndev_pnetid))
+ smc_pnet_find_ndev_pnetid_by_table(ndev, ndev_pnetid)) {
+ smc_pnet_find_rdma_dev(ndev, smcibdev, ibport, vlan_id, gid);
return; /* pnetid could not be determined */
+ }
spin_lock(&smc_ib_devices.lock);
list_for_each_entry(ibdev, &smc_ib_devices.list, list) {
--
2.16.4
next reply other threads:[~2019-02-28 14:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-28 14:10 Ursula Braun [this message]
2019-02-28 20:50 ` [PATCH net-next 1/1] net/smc: allow pnetid-less configuration David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190228141008.16458-1-ubraun@linux.ibm.com \
--to=ubraun@linux.ibm.com \
--cc=davem@davemloft.net \
--cc=heiko.carstens@de.ibm.com \
--cc=kgraul@linux.ibm.com \
--cc=linux-s390@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=raspl@linux.ibm.com \
--cc=schwidefsky@de.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).