From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: "David S. Miller" <davem@davemloft.net>, netdev@vger.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 2/7] enc28j60: Remove duplicate messaging
Date: Thu, 28 Feb 2019 23:34:30 +0300 [thread overview]
Message-ID: <20190228203435.88702-2-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20190228203435.88702-1-andriy.shevchenko@linux.intel.com>
The ->probe() and ->remove() stages can be easily debugged with
initcall_debug or function tracer. There is no need to repeat the same
explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/net/ethernet/microchip/enc28j60.c | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/drivers/net/ethernet/microchip/enc28j60.c b/drivers/net/ethernet/microchip/enc28j60.c
index fa6d37c86315..ebf9c0fd5b7d 100644
--- a/drivers/net/ethernet/microchip/enc28j60.c
+++ b/drivers/net/ethernet/microchip/enc28j60.c
@@ -186,9 +186,6 @@ static int spi_write_op(struct enc28j60_net *priv, u8 op,
static void enc28j60_soft_reset(struct enc28j60_net *priv)
{
- if (netif_msg_hw(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
-
spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
/* Errata workaround #1, CLKRDY check is unreliable,
* delay at least 1 mS instead */
@@ -1124,8 +1121,6 @@ static void enc28j60_irq_work_handler(struct work_struct *work)
struct net_device *ndev = priv->netdev;
int intflags, loop;
- if (netif_msg_intr(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
/* disable further interrupts */
locked_reg_bfclr(priv, EIE, EIE_INTIE);
@@ -1228,8 +1223,6 @@ static void enc28j60_irq_work_handler(struct work_struct *work)
/* re-enable interrupts */
locked_reg_bfset(priv, EIE, EIE_INTIE);
- if (netif_msg_intr(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
}
/*
@@ -1287,9 +1280,6 @@ static netdev_tx_t enc28j60_send_packet(struct sk_buff *skb,
{
struct enc28j60_net *priv = netdev_priv(dev);
- if (netif_msg_tx_queued(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
-
/* If some error occurs while trying to transmit this
* packet, you should return '1' from this function.
* In such a case you _may not_ do anything to the
@@ -1356,9 +1346,6 @@ static int enc28j60_net_open(struct net_device *dev)
{
struct enc28j60_net *priv = netdev_priv(dev);
- if (netif_msg_drv(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
-
if (!is_valid_ether_addr(dev->dev_addr)) {
if (netif_msg_ifup(priv))
dev_err(&dev->dev, "invalid MAC address %pM\n",
@@ -1392,9 +1379,6 @@ static int enc28j60_net_close(struct net_device *dev)
{
struct enc28j60_net *priv = netdev_priv(dev);
- if (netif_msg_drv(priv))
- printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
-
enc28j60_hw_disable(priv);
enc28j60_lowpower(priv, true);
netif_stop_queue(dev);
@@ -1619,7 +1603,6 @@ static int enc28j60_probe(struct spi_device *spi)
" failed (ret = %d)\n", ret);
goto error_register;
}
- dev_info(&dev->dev, DRV_NAME " driver registered\n");
return 0;
@@ -1635,9 +1618,6 @@ static int enc28j60_remove(struct spi_device *spi)
{
struct enc28j60_net *priv = spi_get_drvdata(spi);
- if (netif_msg_drv(priv))
- printk(KERN_DEBUG DRV_NAME ": remove\n");
-
unregister_netdev(priv->netdev);
free_irq(spi->irq, priv);
free_netdev(priv->netdev);
--
2.20.1
next prev parent reply other threads:[~2019-02-28 20:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-28 20:34 [PATCH v1 1/7] enc28j60: Use device_get_mac_address() Andy Shevchenko
2019-02-28 20:34 ` Andy Shevchenko [this message]
2019-02-28 20:34 ` [PATCH v1 3/7] enc28j60: Replace dev_*(&netdev->dev, ...) with netdev_*() Andy Shevchenko
2019-02-28 20:34 ` [PATCH v1 4/7] enc28j60: Drop driver name duplication from messages Andy Shevchenko
2019-02-28 20:34 ` [PATCH v1 5/7] enc28j60: Switch to use module_spi_driver() macro Andy Shevchenko
2019-02-28 20:34 ` [PATCH v1 6/7] enc28j60: Remove linux/init.h Andy Shevchenko
2019-02-28 20:34 ` [PATCH v1 7/7] enc28j60: Convert to use SPDX identifier Andy Shevchenko
2019-03-02 5:46 ` [PATCH v1 1/7] enc28j60: Use device_get_mac_address() David Miller
2019-03-02 5:56 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190228203435.88702-2-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).