From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>,
RDMA mailing list <linux-rdma@vger.kernel.org>,
Maor Gottlieb <maorg@mellanox.com>,
Mark Bloch <markb@mellanox.com>,
Saeed Mahameed <saeedm@mellanox.com>,
linux-netdev <netdev@vger.kernel.org>
Subject: [PATCH rdma-next 05/12] RDMA/mlx5: Move ports allocation to outside of INIT stage
Date: Thu, 28 Mar 2019 15:27:35 +0200 [thread overview]
Message-ID: <20190328132742.12070-6-leon@kernel.org> (raw)
In-Reply-To: <20190328132742.12070-1-leon@kernel.org>
From: Mark Bloch <markb@mellanox.com>
In downstream patches we will need access to the ports before doing
any stages, in order to set net device per representor.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
drivers/infiniband/hw/mlx5/ib_rep.c | 12 ++++++++++--
drivers/infiniband/hw/mlx5/main.c | 24 ++++++++++++------------
2 files changed, 22 insertions(+), 14 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/ib_rep.c b/drivers/infiniband/hw/mlx5/ib_rep.c
index 87d553396fb4..14ac728b460c 100644
--- a/drivers/infiniband/hw/mlx5/ib_rep.c
+++ b/drivers/infiniband/hw/mlx5/ib_rep.c
@@ -51,6 +51,7 @@ mlx5_ib_vport_rep_load(struct mlx5_core_dev *dev, struct mlx5_eswitch_rep *rep)
{
const struct mlx5_ib_profile *profile;
struct mlx5_ib_dev *ibdev;
+ int num_ports = 1;
if (rep->vport == MLX5_VPORT_UPLINK)
profile = &uplink_rep_profile;
@@ -61,10 +62,17 @@ mlx5_ib_vport_rep_load(struct mlx5_core_dev *dev, struct mlx5_eswitch_rep *rep)
if (!ibdev)
return -ENOMEM;
+ ibdev->port = kcalloc(num_ports, sizeof(*ibdev->port),
+ GFP_KERNEL);
+ if (!ibdev->port) {
+ ib_dealloc_device(&ibdev->ib_dev);
+ return -ENOMEM;
+ }
+
ibdev->rep = rep;
ibdev->mdev = dev;
- ibdev->num_ports = max(MLX5_CAP_GEN(dev, num_ports),
- MLX5_CAP_GEN(dev, num_vhca_ports));
+ ibdev->num_ports = num_ports;
+
if (!__mlx5_ib_add(ibdev, profile))
return -EINVAL;
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index df38e24119ff..e3483ecc2f98 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -5914,7 +5914,6 @@ void mlx5_ib_stage_init_cleanup(struct mlx5_ib_dev *dev)
srcu_barrier(&dev->mr_srcu);
cleanup_srcu_struct(&dev->mr_srcu);
}
- kfree(dev->port);
}
int mlx5_ib_stage_init_init(struct mlx5_ib_dev *dev)
@@ -5923,11 +5922,6 @@ int mlx5_ib_stage_init_init(struct mlx5_ib_dev *dev)
int err;
int i;
- dev->port = kcalloc(dev->num_ports, sizeof(*dev->port),
- GFP_KERNEL);
- if (!dev->port)
- return -ENOMEM;
-
for (i = 0; i < dev->num_ports; i++) {
spin_lock_init(&dev->port[i].mp.mpi_lock);
rwlock_init(&dev->port[i].roce.netdev_lock);
@@ -5935,7 +5929,7 @@ int mlx5_ib_stage_init_init(struct mlx5_ib_dev *dev)
err = mlx5_ib_init_multiport_master(dev);
if (err)
- goto err_free_port;
+ return err;
if (!mlx5_core_mp_enabled(mdev)) {
for (i = 1; i <= dev->num_ports; i++) {
@@ -5976,9 +5970,6 @@ int mlx5_ib_stage_init_init(struct mlx5_ib_dev *dev)
err_mp:
mlx5_ib_cleanup_multiport_master(dev);
-err_free_port:
- kfree(dev->port);
-
return -ENOMEM;
}
@@ -6492,6 +6483,7 @@ void __mlx5_ib_remove(struct mlx5_ib_dev *dev,
profile->stage[stage].cleanup(dev);
}
+ kfree(dev->port);
ib_dealloc_device(&dev->ib_dev);
}
@@ -6667,6 +6659,7 @@ static void *mlx5_ib_add(struct mlx5_core_dev *mdev)
enum rdma_link_layer ll;
struct mlx5_ib_dev *dev;
int port_type_cap;
+ int num_ports;
printk_once(KERN_INFO "%s", mlx5_version);
@@ -6682,13 +6675,20 @@ static void *mlx5_ib_add(struct mlx5_core_dev *mdev)
if (mlx5_core_is_mp_slave(mdev) && ll == IB_LINK_LAYER_ETHERNET)
return mlx5_ib_add_slave_port(mdev);
+ num_ports = max(MLX5_CAP_GEN(mdev, num_ports),
+ MLX5_CAP_GEN(mdev, num_vhca_ports));
dev = ib_alloc_device(mlx5_ib_dev, ib_dev);
if (!dev)
return NULL;
+ dev->port = kcalloc(num_ports, sizeof(*dev->port),
+ GFP_KERNEL);
+ if (!dev->port) {
+ ib_dealloc_device((struct ib_device *)dev);
+ return NULL;
+ }
dev->mdev = mdev;
- dev->num_ports = max(MLX5_CAP_GEN(mdev, num_ports),
- MLX5_CAP_GEN(mdev, num_vhca_ports));
+ dev->num_ports = num_ports;
return __mlx5_ib_add(dev, &pf_profile);
}
--
2.20.1
next prev parent reply other threads:[~2019-03-28 13:28 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-28 13:27 [PATCH rdma-next 00/12] Move IB representors to single IB device multiple ports Leon Romanovsky
2019-03-28 13:27 ` [PATCH mlx5-next 01/12] net/mlx5: E-Switch, don't use hardcoded values for FDB prios Leon Romanovsky
2019-03-28 13:27 ` [PATCH mlx5-next 02/12] net/mlx5: E-Switch, add a new prio to be used by the RDMA side Leon Romanovsky
2019-03-28 13:27 ` [PATCH rdma-next 03/12] RDMA/mlx5: Move netdev info into the port struct Leon Romanovsky
2019-03-28 13:27 ` [PATCH rdma-next 04/12] RDMA/mlx5: Free IB device on remove Leon Romanovsky
2019-03-28 13:27 ` Leon Romanovsky [this message]
2019-03-28 13:27 ` [PATCH rdma-next 06/12] RDMA/mlx5: Use correct size for device resources Leon Romanovsky
2019-03-28 13:27 ` [PATCH rdma-next 07/12] RDMA/mlx5: Move rep into port struct Leon Romanovsky
2019-03-28 13:27 ` [PATCH rdma-next 08/12] RDMA/mlx5: Move default representors SQ steering to rule to modify QP Leon Romanovsky
2019-03-28 13:27 ` [PATCH rdma-next 09/12] RDMA/mlx5: Refactor netdev affinity code Leon Romanovsky
2019-03-28 13:27 ` [PATCH rdma-next 10/12] RDMA/mlx5: Move SMI caps logic Leon Romanovsky
2019-03-28 13:27 ` [PATCH rdma-next 11/12] RDMA/mlx5: Move to single device multiport ports in switchdev mode Leon Romanovsky
2019-03-28 13:27 ` [PATCH rdma-next 12/12] RDMA/mlx5: Remove VF representor profile Leon Romanovsky
2019-04-04 13:02 ` [PATCH rdma-next 00/12] Move IB representors to single IB device multiple ports Jason Gunthorpe
2019-04-04 17:42 ` Leon Romanovsky
2019-04-10 6:48 ` Leon Romanovsky
2019-04-10 18:06 ` Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190328132742.12070-6-leon@kernel.org \
--to=leon@kernel.org \
--cc=dledford@redhat.com \
--cc=jgg@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=maorg@mellanox.com \
--cc=markb@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=saeedm@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).