netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>, Frank Pavlic <f.pavlic@kunbus.de>,
	Ben Dooks <ben.dooks@codethink.co.uk>,
	Tristram Ha <Tristram.Ha@microchip.com>,
	"David S . Miller" <davem@davemloft.net>,
	Sasha Levin <sashal@kernel.org>,
	netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 29/68] net: ks8851: Delay requesting IRQ until opened
Date: Mon, 22 Apr 2019 15:44:37 -0400	[thread overview]
Message-ID: <20190422194516.11634-29-sashal@kernel.org> (raw)
In-Reply-To: <20190422194516.11634-1-sashal@kernel.org>

From: Lukas Wunner <lukas@wunner.de>

[ Upstream commit d268f31552794abf5b6aa5af31021643411f25f5 ]

The ks8851 driver currently requests the IRQ before registering the
net_device.  Because the net_device name is used as IRQ name and is
still "eth%d" when the IRQ is requested, it's impossibe to tell IRQs
apart if multiple ks8851 chips are present.  Most other drivers delay
requesting the IRQ until the net_device is opened.  Do the same.

The driver doesn't enable interrupts on the chip before opening the
net_device and disables them when closing it, so there doesn't seem to
be a need to request the IRQ already on probe.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
---
 drivers/net/ethernet/micrel/ks8851.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index 1633fa5c709c..c9faec4c5b25 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -785,6 +785,15 @@ static void ks8851_tx_work(struct work_struct *work)
 static int ks8851_net_open(struct net_device *dev)
 {
 	struct ks8851_net *ks = netdev_priv(dev);
+	int ret;
+
+	ret = request_threaded_irq(dev->irq, NULL, ks8851_irq,
+				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				   dev->name, ks);
+	if (ret < 0) {
+		netdev_err(dev, "failed to get irq\n");
+		return ret;
+	}
 
 	/* lock the card, even if we may not actually be doing anything
 	 * else at the moment */
@@ -899,6 +908,8 @@ static int ks8851_net_stop(struct net_device *dev)
 		dev_kfree_skb(txb);
 	}
 
+	free_irq(dev->irq, ks);
+
 	return 0;
 }
 
@@ -1529,14 +1540,6 @@ static int ks8851_probe(struct spi_device *spi)
 	ks8851_read_selftest(ks);
 	ks8851_init_mac(ks);
 
-	ret = request_threaded_irq(spi->irq, NULL, ks8851_irq,
-				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				   ndev->name, ks);
-	if (ret < 0) {
-		dev_err(&spi->dev, "failed to get irq\n");
-		goto err_irq;
-	}
-
 	ret = register_netdev(ndev);
 	if (ret) {
 		dev_err(&spi->dev, "failed to register network device\n");
@@ -1549,11 +1552,7 @@ static int ks8851_probe(struct spi_device *spi)
 
 	return 0;
 
-
 err_netdev:
-	free_irq(ndev->irq, ks);
-
-err_irq:
 err_id:
 	if (gpio_is_valid(gpio))
 		gpio_set_value(gpio, 0);
@@ -1574,7 +1573,6 @@ static int ks8851_remove(struct spi_device *spi)
 		dev_info(&spi->dev, "remove\n");
 
 	unregister_netdev(priv->netdev);
-	free_irq(spi->irq, priv);
 	if (gpio_is_valid(priv->gpio))
 		gpio_set_value(priv->gpio, 0);
 	regulator_disable(priv->vdd_reg);
-- 
2.19.1


  parent reply	other threads:[~2019-04-22 19:46 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190422194516.11634-1-sashal@kernel.org>
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 03/68] net: ieee802154: fix a potential NULL pointer dereference Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 04/68] ieee802154: hwsim: propagate genlmsg_reply return code Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 05/68] net: stmmac: don't set own bit too early for jumbo frames Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 06/68] qlcnic: Avoid potential NULL pointer dereference Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 07/68] xsk: fix umem memory leak on cleanup Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 10/68] netfilter: nft_set_rbtree: check for inactive element after flag mismatch Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 11/68] netfilter: bridge: set skb transport_header before entering NF_INET_PRE_ROUTING Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 12/68] netfilter: fix NETFILTER_XT_TARGET_TEE dependencies Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 13/68] netfilter: ip6t_srh: fix NULL pointer dereferences Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 27/68] net: ks8851: Dequeue RX packets explicitly Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 28/68] net: ks8851: Reassert reset pin if chip ID check fails Sasha Levin
2019-04-22 19:44 ` Sasha Levin [this message]
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 30/68] net: ks8851: Set initial carrier state to down Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 35/68] net: macb: Add null check for PCLK and HCLK Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 36/68] net/sched: don't dereference a->goto_chain to read the chain index Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 40/68] net: xilinx: fix possible object reference leak Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 41/68] net: ibm: " Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 42/68] net: ethernet: ti: " Sasha Levin
2019-04-22 19:44 ` [PATCH AUTOSEL 4.19 48/68] libceph: fix breakage caused by multipage bvecs Sasha Levin
2019-04-23  8:27   ` Ilya Dryomov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190422194516.11634-29-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=Tristram.Ha@microchip.com \
    --cc=ben.dooks@codethink.co.uk \
    --cc=davem@davemloft.net \
    --cc=f.pavlic@kunbus.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).