[PATCH AUTOSEL 4.19 06/52] batman-adv: Reduce claim hash refcnt only for removed entry

[PATCH AUTOSEL 4.19 06/52] batman-adv: Reduce claim hash refcnt only for removed entry

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 4ba104f468bbfc27362c393815d03aa18fb7a20f ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_bla_del_claim is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bridge_loop_avoidance.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c
index 5f1aeeded0e3..85faf25c2912 100644
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -803,6 +803,8 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv,
 				 const u8 *mac, const unsigned short vid)
 {
 	struct batadv_bla_claim search_claim, *claim;
+	struct batadv_bla_claim *claim_removed_entry;
+	struct hlist_node *claim_removed_node;
 
 	ether_addr_copy(search_claim.addr, mac);
 	search_claim.vid = vid;
@@ -813,10 +815,18 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv,
 	batadv_dbg(BATADV_DBG_BLA, bat_priv, "%s(): %pM, vid %d\n", __func__,
 		   mac, batadv_print_vid(vid));
 
-	batadv_hash_remove(bat_priv->bla.claim_hash, batadv_compare_claim,
-			   batadv_choose_claim, claim);
-	batadv_claim_put(claim); /* reference from the hash is gone */
+	claim_removed_node = batadv_hash_remove(bat_priv->bla.claim_hash,
+						batadv_compare_claim,
+						batadv_choose_claim, claim);
+	if (!claim_removed_node)
+		goto free_claim;
 
+	/* reference from the hash is gone */
+	claim_removed_entry = hlist_entry(claim_removed_node,
+					  struct batadv_bla_claim, hash_entry);
+	batadv_claim_put(claim_removed_entry);
+
+free_claim:
 	/* don't need the reference from hash_find() anymore */
 	batadv_claim_put(claim);
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 07/52] batman-adv: Reduce tt_local hash refcnt only for removed entry

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 3d65b9accab4a7ed5038f6df403fbd5e298398c7 ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_tt_local_remove is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: ef72706a0543 ("batman-adv: protect tt_local_entry from concurrent delete events")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/translation-table.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index d21624c44665..696e6ddc534b 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -1332,9 +1332,10 @@ u16 batadv_tt_local_remove(struct batadv_priv *bat_priv, const u8 *addr,
 			   unsigned short vid, const char *message,
 			   bool roaming)
 {
+	struct batadv_tt_local_entry *tt_removed_entry;
 	struct batadv_tt_local_entry *tt_local_entry;
 	u16 flags, curr_flags = BATADV_NO_FLAGS;
-	void *tt_entry_exists;
+	struct hlist_node *tt_removed_node;
 
 	tt_local_entry = batadv_tt_local_hash_find(bat_priv, addr, vid);
 	if (!tt_local_entry)
@@ -1363,15 +1364,18 @@ u16 batadv_tt_local_remove(struct batadv_priv *bat_priv, const u8 *addr,
 	 */
 	batadv_tt_local_event(bat_priv, tt_local_entry, BATADV_TT_CLIENT_DEL);
 
-	tt_entry_exists = batadv_hash_remove(bat_priv->tt.local_hash,
+	tt_removed_node = batadv_hash_remove(bat_priv->tt.local_hash,
 					     batadv_compare_tt,
 					     batadv_choose_tt,
 					     &tt_local_entry->common);
-	if (!tt_entry_exists)
+	if (!tt_removed_node)
 		goto out;
 
-	/* extra call to free the local tt entry */
-	batadv_tt_local_entry_put(tt_local_entry);
+	/* drop reference of remove hash entry */
+	tt_removed_entry = hlist_entry(tt_removed_node,
+				       struct batadv_tt_local_entry,
+				       common.hash_entry);
+	batadv_tt_local_entry_put(tt_removed_entry);
 
 out:
 	if (tt_local_entry)
-- 
2.19.1

[PATCH AUTOSEL 4.19 08/52] batman-adv: Reduce tt_global hash refcnt only for removed entry

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit f131a56880d10932931e74773fb8702894a94a75 ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_tt_global_free is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: 7683fdc1e886 ("batman-adv: protect the local and the global trans-tables with rcu")
Reported-by: Martin Weinelt <martin@linuxlounge.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/translation-table.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 696e6ddc534b..359ec1a6e822 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -616,14 +616,26 @@ static void batadv_tt_global_free(struct batadv_priv *bat_priv,
 				  struct batadv_tt_global_entry *tt_global,
 				  const char *message)
 {
+	struct batadv_tt_global_entry *tt_removed_entry;
+	struct hlist_node *tt_removed_node;
+
 	batadv_dbg(BATADV_DBG_TT, bat_priv,
 		   "Deleting global tt entry %pM (vid: %d): %s\n",
 		   tt_global->common.addr,
 		   batadv_print_vid(tt_global->common.vid), message);
 
-	batadv_hash_remove(bat_priv->tt.global_hash, batadv_compare_tt,
-			   batadv_choose_tt, &tt_global->common);
-	batadv_tt_global_entry_put(tt_global);
+	tt_removed_node = batadv_hash_remove(bat_priv->tt.global_hash,
+					     batadv_compare_tt,
+					     batadv_choose_tt,
+					     &tt_global->common);
+	if (!tt_removed_node)
+		return;
+
+	/* drop reference of remove hash entry */
+	tt_removed_entry = hlist_entry(tt_removed_node,
+				       struct batadv_tt_global_entry,
+				       common.hash_entry);
+	batadv_tt_global_entry_put(tt_removed_entry);
 }
 
 /**
-- 
2.19.1

[PATCH AUTOSEL 4.19 09/52] batman-adv: fix warning in function batadv_v_elp_get_throughput

[Sasha Levin]

From: Anders Roxell <anders.roxell@linaro.org>

[ Upstream commit ca8c3b922e7032aff6cc3fd05548f4df1f3df90e ]

When CONFIG_CFG80211 isn't enabled the compiler correcly warns about
'sinfo.pertid' may be unused. It can also happen for other error
conditions that it not warn about.

net/batman-adv/bat_v_elp.c: In function ‘batadv_v_elp_get_throughput.isra.0’:
include/net/cfg80211.h:6370:13: warning: ‘sinfo.pertid’ may be used
 uninitialized in this function [-Wmaybe-uninitialized]
  kfree(sinfo->pertid);
        ~~~~~^~~~~~~~

Rework so that we only release '&sinfo' if cfg80211_get_station returns
zero.

Fixes: 7d652669b61d ("batman-adv: release station info tidstats")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_v_elp.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index ef0dec20c7d8..5da183b2f4c9 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -104,8 +104,10 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
 
 		ret = cfg80211_get_station(real_netdev, neigh->addr, &sinfo);
 
-		/* free the TID stats immediately */
-		cfg80211_sinfo_release_content(&sinfo);
+		if (!ret) {
+			/* free the TID stats immediately */
+			cfg80211_sinfo_release_content(&sinfo);
+		}
 
 		dev_put(real_netdev);
 		if (ret == -ENOENT) {
-- 
2.19.1

[PATCH AUTOSEL 4.19 12/52] igb: Fix WARN_ONCE on runtime suspend

[Sasha Levin]

From: Arvind Sankar <niveditas98@gmail.com>

[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ]

The runtime_suspend device callbacks are not supposed to save
configuration state or change the power state. Commit fb29f76cc566
("igb: Fix an issue that PME is not enabled during runtime suspend")
changed the driver to not save configuration state during runtime
suspend, however the driver callback still put the device into a
low-power state. This causes a warning in the pci pm core and results in
pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.

Fix this by not changing the power state either, leaving that to pci pm
core, and make the same change for suspend callback as well.

Also move a couple of defines into the appropriate header file instead
of inline in the .c file.

Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend")
Signed-off-by: Arvind Sankar <niveditas98@gmail.com>
Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/igb/e1000_defines.h    |  2 +
 drivers/net/ethernet/intel/igb/igb_main.c     | 57 +++----------------
 2 files changed, 10 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 8a28f3388f69..dca671591ef6 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -194,6 +194,8 @@
 /* enable link status from external LINK_0 and LINK_1 pins */
 #define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
 #define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
+#define E1000_CTRL_ADVD3WUC 0x00100000  /* D3 WUC */
+#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */
 #define E1000_CTRL_SDP0_DIR 0x00400000  /* SDP0 Data direction */
 #define E1000_CTRL_SDP1_DIR 0x00800000  /* SDP1 Data direction */
 #define E1000_CTRL_RST      0x04000000  /* Global reset */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ffaa6e031632..aa39a068858e 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -8754,9 +8754,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl, rctl, status;
 	u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
-#ifdef CONFIG_PM
-	int retval = 0;
-#endif
+	bool wake;
 
 	rtnl_lock();
 	netif_device_detach(netdev);
@@ -8769,14 +8767,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	igb_clear_interrupt_scheme(adapter);
 	rtnl_unlock();
 
-#ifdef CONFIG_PM
-	if (!runtime) {
-		retval = pci_save_state(pdev);
-		if (retval)
-			return retval;
-	}
-#endif
-
 	status = rd32(E1000_STATUS);
 	if (status & E1000_STATUS_LU)
 		wufc &= ~E1000_WUFC_LNKC;
@@ -8793,10 +8783,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 		}
 
 		ctrl = rd32(E1000_CTRL);
-		/* advertise wake from D3Cold */
-		#define E1000_CTRL_ADVD3WUC 0x00100000
-		/* phy power management enable */
-		#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
 		ctrl |= E1000_CTRL_ADVD3WUC;
 		wr32(E1000_CTRL, ctrl);
 
@@ -8810,12 +8796,15 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 		wr32(E1000_WUFC, 0);
 	}
 
-	*enable_wake = wufc || adapter->en_mng_pt;
-	if (!*enable_wake)
+	wake = wufc || adapter->en_mng_pt;
+	if (!wake)
 		igb_power_down_link(adapter);
 	else
 		igb_power_up_link(adapter);
 
+	if (enable_wake)
+		*enable_wake = wake;
+
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.
 	 */
@@ -8858,22 +8847,7 @@ static void igb_deliver_wake_packet(struct net_device *netdev)
 
 static int __maybe_unused igb_suspend(struct device *dev)
 {
-	int retval;
-	bool wake;
-	struct pci_dev *pdev = to_pci_dev(dev);
-
-	retval = __igb_shutdown(pdev, &wake, 0);
-	if (retval)
-		return retval;
-
-	if (wake) {
-		pci_prepare_to_sleep(pdev);
-	} else {
-		pci_wake_from_d3(pdev, false);
-		pci_set_power_state(pdev, PCI_D3hot);
-	}
-
-	return 0;
+	return __igb_shutdown(to_pci_dev(dev), NULL, 0);
 }
 
 static int __maybe_unused igb_resume(struct device *dev)
@@ -8944,22 +8918,7 @@ static int __maybe_unused igb_runtime_idle(struct device *dev)
 
 static int __maybe_unused igb_runtime_suspend(struct device *dev)
 {
-	struct pci_dev *pdev = to_pci_dev(dev);
-	int retval;
-	bool wake;
-
-	retval = __igb_shutdown(pdev, &wake, 1);
-	if (retval)
-		return retval;
-
-	if (wake) {
-		pci_prepare_to_sleep(pdev);
-	} else {
-		pci_wake_from_d3(pdev, false);
-		pci_set_power_state(pdev, PCI_D3hot);
-	}
-
-	return 0;
+	return __igb_shutdown(to_pci_dev(dev), NULL, 1);
 }
 
 static int __maybe_unused igb_runtime_resume(struct device *dev)
-- 
2.19.1

[PATCH AUTOSEL 4.19 13/52] fm10k: Fix a potential NULL pointer dereference

[Sasha Levin]

From: Yue Haibing <yuehaibing@huawei.com>

[ Upstream commit 01ca667133d019edc9f0a1f70a272447c84ec41f ]

Syzkaller report this:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 4378 Comm: syz-executor.0 Tainted: G         C        5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:__lock_acquire+0x95b/0x3200 kernel/locking/lockdep.c:3573
Code: 00 0f 85 28 1e 00 00 48 81 c4 08 01 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 4c 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 24 00 00 49 81 7d 00 e0 de 03 a6 41 bc 00 00
RSP: 0018:ffff8881e3c07a40 EFLAGS: 00010002
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000080
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8881e3c07d98 R11: ffff8881c7f21f80 R12: 0000000000000001
R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000001
FS:  00007fce2252e700(0000) GS:ffff8881f2400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fffc7eb0228 CR3: 00000001e5bea002 CR4: 00000000007606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 lock_acquire+0xff/0x2c0 kernel/locking/lockdep.c:4211
 __mutex_lock_common kernel/locking/mutex.c:925 [inline]
 __mutex_lock+0xdf/0x1050 kernel/locking/mutex.c:1072
 drain_workqueue+0x24/0x3f0 kernel/workqueue.c:2934
 destroy_workqueue+0x23/0x630 kernel/workqueue.c:4319
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x30c/0x480 kernel/module.c:961
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fce2252dc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fce2252e6bc
R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff

If alloc_workqueue fails, it should return -ENOMEM, otherwise may
trigger this NULL pointer dereference while unloading drivers.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 0a38c17a21a0 ("fm10k: Remove create_workqueue")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/fm10k/fm10k_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
index 3f536541f45f..78a43d688cb1 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
@@ -41,6 +41,8 @@ static int __init fm10k_init_module(void)
 	/* create driver workqueue */
 	fm10k_workqueue = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0,
 					  fm10k_driver_name);
+	if (!fm10k_workqueue)
+		return -ENOMEM;
 
 	fm10k_dbg_init();
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 16/52] net: hns3: fix compile error

[Sasha Levin]

From: Xi Wang <wangxi11@huawei.com>

[ Upstream commit 669efc76b317b3aa550ffbf0b79d064cb00a5f96 ]

Currently, the rules for configuring search paths in Kbuild have
changed, this will lead some erros when compiling hns3 with the
following command:

make O=DIR M=drivers/net/ethernet/hisilicon/hns3

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:11:10:
fatal error: hnae3.h: No such file or directory

This patch fix it by adding $(srctree)/ prefix to the serach paths.

Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile | 2 +-
 drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
index cb8ddd043476..d278fc7ea3ed 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the HISILICON network device drivers.
 #
 
-ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3
+ccflags-y := -I $(srctree)/drivers/net/ethernet/hisilicon/hns3
 
 obj-$(CONFIG_HNS3_HCLGE) += hclge.o
 hclge-objs = hclge_main.o hclge_cmd.o hclge_mdio.o hclge_tm.o hclge_mbx.o
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
index fb93bbd35845..6193f8fa7cf3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the HISILICON network device drivers.
 #
 
-ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3
+ccflags-y := -I $(srctree)/drivers/net/ethernet/hisilicon/hns3
 
 obj-$(CONFIG_HNS3_HCLGEVF) += hclgevf.o
 hclgevf-objs = hclgevf_main.o hclgevf_cmd.o hclgevf_mbx.o
\ No newline at end of file
-- 
2.19.1

[PATCH AUTOSEL 4.19 17/52] net/mlx5: E-Switch, Fix esw manager vport indication for more vport commands

[Sasha Levin]

From: Omri Kahalon <omrik@mellanox.com>

[ Upstream commit eca4a928585ac08147e5cc8e2111ecbc6279ee31 ]

Traditionally, the PF (Physical Function) which resides on vport 0 was
the E-switch manager. Since the ECPF (Embedded CPU Physical Function),
which resides on vport 0xfffe, was introduced as the E-Switch manager,
the assumption that the E-switch manager is on vport 0 is incorrect.

Since the eswitch code already uses the actual vport value, all we
need is to always set other_vport=1.

Signed-off-by: Omri Kahalon <omrik@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 26c9f9421901..55ccd90beeb0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -80,8 +80,7 @@ static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, u16 vport,
 		 opcode, MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 	MLX5_SET(modify_nic_vport_context_in, in, field_select.change_event, 1);
 	MLX5_SET(modify_nic_vport_context_in, in, vport_number, vport);
-	if (vport)
-		MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1);
+	MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1);
 	nic_vport_ctx = MLX5_ADDR_OF(modify_nic_vport_context_in,
 				     in, nic_vport_context);
 
@@ -109,8 +108,7 @@ static int modify_esw_vport_context_cmd(struct mlx5_core_dev *dev, u16 vport,
 	MLX5_SET(modify_esw_vport_context_in, in, opcode,
 		 MLX5_CMD_OP_MODIFY_ESW_VPORT_CONTEXT);
 	MLX5_SET(modify_esw_vport_context_in, in, vport_number, vport);
-	if (vport)
-		MLX5_SET(modify_esw_vport_context_in, in, other_vport, 1);
+	MLX5_SET(modify_esw_vport_context_in, in, other_vport, 1);
 	return mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 18/52] bonding: show full hw address in sysfs for slave entries

[Sasha Levin]

From: Konstantin Khorenko <khorenko@virtuozzo.com>

[ Upstream commit 18bebc6dd3281955240062655a4df35eef2c46b3 ]

Bond expects ethernet hwaddr for its slave, but it can be longer than 6
bytes - infiniband interface for example.

 # cat /sys/devices/<skipped>/net/ib0/address
 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1

 # cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr
 80:00:02:08:fe:80

So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well.

Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_sysfs_slave.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c
index 2f120b2ffef0..4985268e2273 100644
--- a/drivers/net/bonding/bond_sysfs_slave.c
+++ b/drivers/net/bonding/bond_sysfs_slave.c
@@ -55,7 +55,9 @@ static SLAVE_ATTR_RO(link_failure_count);
 
 static ssize_t perm_hwaddr_show(struct slave *slave, char *buf)
 {
-	return sprintf(buf, "%pM\n", slave->perm_hwaddr);
+	return sprintf(buf, "%*phC\n",
+		       slave->dev->addr_len,
+		       slave->perm_hwaddr);
 }
 static SLAVE_ATTR_RO(perm_hwaddr);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 19/52] net: stmmac: use correct DMA buffer size in the RX descriptor

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 583e6361414903c5206258a30e5bd88cb03c0254 ]

We always program the maximum DMA buffer size into the receive descriptor,
although the allocated size may be less. E.g. with the default MTU size
we allocate only 1536 bytes. If somebody sends us a bigger frame, then
memory may get corrupted.

Fix by using exact buffer sizes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/descs_com.h   | 22 ++++++++++++-------
 .../ethernet/stmicro/stmmac/dwmac4_descs.c    |  2 +-
 .../ethernet/stmicro/stmmac/dwxgmac2_descs.c  |  2 +-
 .../net/ethernet/stmicro/stmmac/enh_desc.c    | 10 ++++++---
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  2 +-
 .../net/ethernet/stmicro/stmmac/norm_desc.c   | 10 ++++++---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  6 +++--
 7 files changed, 35 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
index 40d6356a7e73..3dfb07a78952 100644
--- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
@@ -29,11 +29,13 @@
 /* Specific functions used for Ring mode */
 
 /* Enhanced descriptors */
-static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end)
+static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end,
+					   int bfsize)
 {
-	p->des1 |= cpu_to_le32((BUF_SIZE_8KiB
-			<< ERDES1_BUFFER2_SIZE_SHIFT)
-		   & ERDES1_BUFFER2_SIZE_MASK);
+	if (bfsize == BUF_SIZE_16KiB)
+		p->des1 |= cpu_to_le32((BUF_SIZE_8KiB
+				<< ERDES1_BUFFER2_SIZE_SHIFT)
+			   & ERDES1_BUFFER2_SIZE_MASK);
 
 	if (end)
 		p->des1 |= cpu_to_le32(ERDES1_END_RING);
@@ -59,11 +61,15 @@ static inline void enh_set_tx_desc_len_on_ring(struct dma_desc *p, int len)
 }
 
 /* Normal descriptors */
-static inline void ndesc_rx_set_on_ring(struct dma_desc *p, int end)
+static inline void ndesc_rx_set_on_ring(struct dma_desc *p, int end, int bfsize)
 {
-	p->des1 |= cpu_to_le32(((BUF_SIZE_2KiB - 1)
-				<< RDES1_BUFFER2_SIZE_SHIFT)
-		    & RDES1_BUFFER2_SIZE_MASK);
+	if (bfsize >= BUF_SIZE_2KiB) {
+		int bfsize2;
+
+		bfsize2 = min(bfsize - BUF_SIZE_2KiB + 1, BUF_SIZE_2KiB - 1);
+		p->des1 |= cpu_to_le32((bfsize2 << RDES1_BUFFER2_SIZE_SHIFT)
+			    & RDES1_BUFFER2_SIZE_MASK);
+	}
 
 	if (end)
 		p->des1 |= cpu_to_le32(RDES1_END_RING);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index 736e29635b77..313a58b68fee 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -296,7 +296,7 @@ static int dwmac4_wrback_get_rx_timestamp_status(void *desc, void *next_desc,
 }
 
 static void dwmac4_rd_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
-				   int mode, int end)
+				   int mode, int end, int bfsize)
 {
 	dwmac4_set_rx_owner(p, disable_rx_ic);
 }
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
index 1d858fdec997..98fa471da7c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
@@ -123,7 +123,7 @@ static int dwxgmac2_get_rx_timestamp_status(void *desc, void *next_desc,
 }
 
 static void dwxgmac2_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
-				  int mode, int end)
+				  int mode, int end, int bfsize)
 {
 	dwxgmac2_set_rx_owner(p, disable_rx_ic);
 }
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index 5ef91a790f9d..e8855e6adb48 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -259,15 +259,19 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 }
 
 static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
-				  int mode, int end)
+				  int mode, int end, int bfsize)
 {
+	int bfsize1;
+
 	p->des0 |= cpu_to_le32(RDES0_OWN);
-	p->des1 |= cpu_to_le32(BUF_SIZE_8KiB & ERDES1_BUFFER1_SIZE_MASK);
+
+	bfsize1 = min(bfsize, BUF_SIZE_8KiB);
+	p->des1 |= cpu_to_le32(bfsize1 & ERDES1_BUFFER1_SIZE_MASK);
 
 	if (mode == STMMAC_CHAIN_MODE)
 		ehn_desc_rx_set_on_chain(p);
 	else
-		ehn_desc_rx_set_on_ring(p, end);
+		ehn_desc_rx_set_on_ring(p, end, bfsize);
 
 	if (disable_rx_ic)
 		p->des1 |= cpu_to_le32(ERDES1_DISABLE_IC);
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 92b8944f26e3..5bb00234d961 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -33,7 +33,7 @@ struct dma_extended_desc;
 struct stmmac_desc_ops {
 	/* DMA RX descriptor ring initialization */
 	void (*init_rx_desc)(struct dma_desc *p, int disable_rx_ic, int mode,
-			int end);
+			int end, int bfsize);
 	/* DMA TX descriptor ring initialization */
 	void (*init_tx_desc)(struct dma_desc *p, int mode, int end);
 	/* Invoked by the xmit function to prepare the tx descriptor */
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index de65bb29feba..c55a9815b394 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -135,15 +135,19 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 }
 
 static void ndesc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode,
-			       int end)
+			       int end, int bfsize)
 {
+	int bfsize1;
+
 	p->des0 |= cpu_to_le32(RDES0_OWN);
-	p->des1 |= cpu_to_le32((BUF_SIZE_2KiB - 1) & RDES1_BUFFER1_SIZE_MASK);
+
+	bfsize1 = min(bfsize, BUF_SIZE_2KiB - 1);
+	p->des1 |= cpu_to_le32(bfsize & RDES1_BUFFER1_SIZE_MASK);
 
 	if (mode == STMMAC_CHAIN_MODE)
 		ndesc_rx_set_on_chain(p, end);
 	else
-		ndesc_rx_set_on_ring(p, end);
+		ndesc_rx_set_on_ring(p, end, bfsize);
 
 	if (disable_rx_ic)
 		p->des1 |= cpu_to_le32(RDES1_DISABLE_IC);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 886176be818e..9f766b74b1bc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1111,11 +1111,13 @@ static void stmmac_clear_rx_descriptors(struct stmmac_priv *priv, u32 queue)
 		if (priv->extend_desc)
 			stmmac_init_rx_desc(priv, &rx_q->dma_erx[i].basic,
 					priv->use_riwt, priv->mode,
-					(i == DMA_RX_SIZE - 1));
+					(i == DMA_RX_SIZE - 1),
+					priv->dma_buf_sz);
 		else
 			stmmac_init_rx_desc(priv, &rx_q->dma_rx[i],
 					priv->use_riwt, priv->mode,
-					(i == DMA_RX_SIZE - 1));
+					(i == DMA_RX_SIZE - 1),
+					priv->dma_buf_sz);
 }
 
 /**
-- 
2.19.1

[PATCH AUTOSEL 4.19 20/52] net: stmmac: ratelimit RX error logs

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 972c9be784e077bc56472c78243e0326e525b689 ]

Ratelimit RX error logs.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9f766b74b1bc..138ef4117f71 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3412,9 +3412,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			 *  ignored
 			 */
 			if (frame_len > priv->dma_buf_sz) {
-				netdev_err(priv->dev,
-					   "len %d larger than size (%d)\n",
-					   frame_len, priv->dma_buf_sz);
+				if (net_ratelimit())
+					netdev_err(priv->dev,
+						   "len %d larger than size (%d)\n",
+						   frame_len, priv->dma_buf_sz);
 				priv->dev->stats.rx_length_errors++;
 				break;
 			}
@@ -3471,9 +3472,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			} else {
 				skb = rx_q->rx_skbuff[entry];
 				if (unlikely(!skb)) {
-					netdev_err(priv->dev,
-						   "%s: Inconsistent Rx chain\n",
-						   priv->dev->name);
+					if (net_ratelimit())
+						netdev_err(priv->dev,
+							   "%s: Inconsistent Rx chain\n",
+							   priv->dev->name);
 					priv->dev->stats.rx_dropped++;
 					break;
 				}
-- 
2.19.1

[PATCH AUTOSEL 4.19 21/52] net: stmmac: don't stop NAPI processing when dropping a packet

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 07b3975352374c3f5ebb4a42ef0b253fe370542d ]

Currently, if we drop a packet, we exit from NAPI loop before the budget
is consumed. In some situations this will make the RX processing stall
e.g. when flood pinging the system with oversized packets, as the
errorneous packets are not dropped efficiently.

If we drop a packet, we should just continue to the next one as long as
the budget allows.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 138ef4117f71..a8d7455d0beb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3333,9 +3333,8 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 {
 	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
 	struct stmmac_channel *ch = &priv->channel[queue];
-	unsigned int entry = rx_q->cur_rx;
+	unsigned int next_entry = rx_q->cur_rx;
 	int coe = priv->hw->rx_csum;
-	unsigned int next_entry;
 	unsigned int count = 0;
 	bool xmac;
 
@@ -3353,10 +3352,12 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 		stmmac_display_ring(priv, rx_head, DMA_RX_SIZE, true);
 	}
 	while (count < limit) {
-		int status;
+		int entry, status;
 		struct dma_desc *p;
 		struct dma_desc *np;
 
+		entry = next_entry;
+
 		if (priv->extend_desc)
 			p = (struct dma_desc *)(rx_q->dma_erx + entry);
 		else
@@ -3417,7 +3418,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 						   "len %d larger than size (%d)\n",
 						   frame_len, priv->dma_buf_sz);
 				priv->dev->stats.rx_length_errors++;
-				break;
+				continue;
 			}
 
 			/* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3
@@ -3452,7 +3453,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 						dev_warn(priv->device,
 							 "packet dropped\n");
 					priv->dev->stats.rx_dropped++;
-					break;
+					continue;
 				}
 
 				dma_sync_single_for_cpu(priv->device,
@@ -3477,7 +3478,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 							   "%s: Inconsistent Rx chain\n",
 							   priv->dev->name);
 					priv->dev->stats.rx_dropped++;
-					break;
+					continue;
 				}
 				prefetch(skb->data - NET_IP_ALIGN);
 				rx_q->rx_skbuff[entry] = NULL;
@@ -3512,7 +3513,6 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			priv->dev->stats.rx_packets++;
 			priv->dev->stats.rx_bytes += frame_len;
 		}
-		entry = next_entry;
 	}
 
 	stmmac_rx_refill(priv, queue);
-- 
2.19.1

[PATCH AUTOSEL 4.19 22/52] net: stmmac: don't overwrite discard_frame status

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 1b746ce8b397e58f9e40ce5c63b7198de6930482 ]

If we have error bits set, the discard_frame status will get overwritten
by checksum bit checks, which might set the status back to good one.
Fix by checking the COE status only if the frame is good.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index e8855e6adb48..c42ef6c729c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -231,9 +231,10 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 	 * It doesn't match with the information reported into the databook.
 	 * At any rate, we need to understand if the CSUM hw computation is ok
 	 * and report this info to the upper layers. */
-	ret = enh_desc_coe_rdes0(!!(rdes0 & RDES0_IPC_CSUM_ERROR),
-				 !!(rdes0 & RDES0_FRAME_TYPE),
-				 !!(rdes0 & ERDES0_RX_MAC_ADDR));
+	if (likely(ret == good_frame))
+		ret = enh_desc_coe_rdes0(!!(rdes0 & RDES0_IPC_CSUM_ERROR),
+					 !!(rdes0 & RDES0_FRAME_TYPE),
+					 !!(rdes0 & ERDES0_RX_MAC_ADDR));
 
 	if (unlikely(rdes0 & RDES0_DRIBBLING))
 		x->dribbling_bit++;
-- 
2.19.1

[PATCH AUTOSEL 4.19 23/52] net: stmmac: fix dropping of multi-descriptor RX frames

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 8ac0c24fe1c256af6644caf3d311029440ec2fbd ]

Packets without the last descriptor set should be dropped early. If we
receive a frame larger than the DMA buffer, the HW will continue using the
next descriptor. Driver mistakes these as individual frames, and sometimes
a truncated frame (without the LD set) may look like a valid packet.

This fixes a strange issue where the system replies to 4098-byte ping
although the MTU/DMA buffer size is set to 4096, and yet at the same
time it's logging an oversized packet.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index c42ef6c729c0..5202d6ad7919 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -201,6 +201,11 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 	if (unlikely(rdes0 & RDES0_OWN))
 		return dma_own;
 
+	if (unlikely(!(rdes0 & RDES0_LAST_DESCRIPTOR))) {
+		stats->rx_length_errors++;
+		return discard_frame;
+	}
+
 	if (unlikely(rdes0 & RDES0_ERROR_SUMMARY)) {
 		if (unlikely(rdes0 & RDES0_DESCRIPTOR_ERROR)) {
 			x->rx_desc++;
-- 
2.19.1

[PATCH AUTOSEL 4.19 24/52] net: stmmac: don't log oversized frames

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 057a0c5642a2ff2db7c421cdcde34294a23bf37b ]

This is log is harmful as it can trigger multiple times per packet. Delete
it.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index c55a9815b394..b7dd4e3c760d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -91,8 +91,6 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 		return dma_own;
 
 	if (unlikely(!(rdes0 & RDES0_LAST_DESCRIPTOR))) {
-		pr_warn("%s: Oversized frame spanned multiple buffers\n",
-			__func__);
 		stats->rx_length_errors++;
 		return discard_frame;
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.19 26/52] debugfs: fix use-after-free on symlink traversal

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit 93b919da64c15b90953f96a536e5e61df896ca57 ]

symlink body shouldn't be freed without an RCU delay.  Switch debugfs to
->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback.  Similar to solution for bpf, only here it's even
more obvious that ->evict_inode() can be dropped.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/debugfs/inode.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 41ef452c1fcf..e5126fad57c5 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -163,19 +163,24 @@ static int debugfs_show_options(struct seq_file *m, struct dentry *root)
 	return 0;
 }
 
-static void debugfs_evict_inode(struct inode *inode)
+static void debugfs_i_callback(struct rcu_head *head)
 {
-	truncate_inode_pages_final(&inode->i_data);
-	clear_inode(inode);
+	struct inode *inode = container_of(head, struct inode, i_rcu);
 	if (S_ISLNK(inode->i_mode))
 		kfree(inode->i_link);
+	free_inode_nonrcu(inode);
+}
+
+static void debugfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, debugfs_i_callback);
 }
 
 static const struct super_operations debugfs_super_operations = {
 	.statfs		= simple_statfs,
 	.remount_fs	= debugfs_remount,
 	.show_options	= debugfs_show_options,
-	.evict_inode	= debugfs_evict_inode,
+	.destroy_inode	= debugfs_destroy_inode,
 };
 
 static void debugfs_release_dentry(struct dentry *dentry)
-- 
2.19.1

[PATCH AUTOSEL 4.19 37/52] net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()

[Sasha Levin]

From: Liubin Shu <shuliubin@huawei.com>

[ Upstream commit 3a39a12ad364a9acd1038ba8da67cd8430f30de4 ]

This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]

After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be
interrupted by interruptions, and than call hns_nic_tx_poll_one()
to handle the new packets, and free the skb. So, when turn back to
hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.

This patch update tx ring statistics in hns_nic_tx_poll_one() to
fix the bug.

Signed-off-by: Liubin Shu <shuliubin@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index b043370c2685..95b4445aeac7 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -376,8 +376,6 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev,
 	wmb(); /* commit all data before submit */
 	assert(skb->queue_mapping < priv->ae_handle->q_num);
 	hnae_queue_xmit(priv->ae_handle->qs[skb->queue_mapping], buf_num);
-	ring->stats.tx_pkts++;
-	ring->stats.tx_bytes += skb->len;
 
 	return NETDEV_TX_OK;
 
@@ -999,6 +997,9 @@ static int hns_nic_tx_poll_one(struct hns_nic_ring_data *ring_data,
 		/* issue prefetch for next Tx descriptor */
 		prefetch(&ring->desc_cb[ring->next_to_clean]);
 	}
+	/* update tx ring statistics. */
+	ring->stats.tx_pkts += pkts;
+	ring->stats.tx_bytes += bytes;
 
 	NETIF_TX_UNLOCK(ring);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 38/52] net: hns: Use NAPI_POLL_WEIGHT for hns driver

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit acb1ce15a61154aa501891d67ebf79bc9ea26818 ]

When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"

This is because the kernel checks the NAPI polling weights
requested by drivers and it prints an error message if a driver
requests a weight bigger than 64.

So use NAPI_POLL_WEIGHT to fix it.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 95b4445aeac7..58f18032c53c 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -29,9 +29,6 @@
 
 #define SERVICE_TIMER_HZ (1 * HZ)
 
-#define NIC_TX_CLEAN_MAX_NUM 256
-#define NIC_RX_CLEAN_MAX_NUM 64
-
 #define RCB_IRQ_NOT_INITED 0
 #define RCB_IRQ_INITED 1
 #define HNS_BUFFER_SIZE_2048 2048
@@ -2154,7 +2151,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv)
 			hns_nic_tx_fini_pro_v2;
 
 		netif_napi_add(priv->netdev, &rd->napi,
-			       hns_nic_common_poll, NIC_TX_CLEAN_MAX_NUM);
+			       hns_nic_common_poll, NAPI_POLL_WEIGHT);
 		rd->ring->irq_init_flag = RCB_IRQ_NOT_INITED;
 	}
 	for (i = h->q_num; i < h->q_num * 2; i++) {
@@ -2167,7 +2164,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv)
 			hns_nic_rx_fini_pro_v2;
 
 		netif_napi_add(priv->netdev, &rd->napi,
-			       hns_nic_common_poll, NIC_RX_CLEAN_MAX_NUM);
+			       hns_nic_common_poll, NAPI_POLL_WEIGHT);
 		rd->ring->irq_init_flag = RCB_IRQ_NOT_INITED;
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 39/52] net: hns: Fix probabilistic memory overwrite when HNS driver initialized

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit c0b0984426814f3a9251873b689e67d34d8ccd84 ]

When reboot the system again and again, may cause a memory
overwrite.

[   15.638922] systemd[1]: Reached target Swap.
[   15.667561] tun: Universal TUN/TAP device driver, 1.6
[   15.676756] Bridge firewalling registered
[   17.344135] Unable to handle kernel paging request at virtual address 0000000200000040
[   17.352179] Mem abort info:
[   17.355007]   ESR = 0x96000004
[   17.358105]   Exception class = DABT (current EL), IL = 32 bits
[   17.364112]   SET = 0, FnV = 0
[   17.367209]   EA = 0, S1PTW = 0
[   17.370393] Data abort info:
[   17.373315]   ISV = 0, ISS = 0x00000004
[   17.377206]   CM = 0, WnR = 0
[   17.380214] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____)
[   17.386926] [0000000200000040] pgd=0000000000000000
[   17.391878] Internal error: Oops: 96000004 [#1] SMP
[   17.396824] CPU: 23 PID: 95 Comm: kworker/u130:0 Tainted: G            E     4.19.25-1.2.78.aarch64 #1
[   17.414175] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.54 08/16/2018
[   17.425615] Workqueue: events_unbound async_run_entry_fn
[   17.435151] pstate: 00000005 (nzcv daif -PAN -UAO)
[   17.444139] pc : __mutex_lock.isra.1+0x74/0x540
[   17.453002] lr : __mutex_lock.isra.1+0x3c/0x540
[   17.461701] sp : ffff000100d9bb60
[   17.469146] x29: ffff000100d9bb60 x28: 0000000000000000
[   17.478547] x27: 0000000000000000 x26: ffff802fb8945000
[   17.488063] x25: 0000000000000000 x24: ffff802fa32081a8
[   17.497381] x23: 0000000000000002 x22: ffff801fa2b15220
[   17.506701] x21: ffff000009809000 x20: ffff802fa23a0888
[   17.515980] x19: ffff801fa2b15220 x18: 0000000000000000
[   17.525272] x17: 0000000200000000 x16: 0000000200000000
[   17.534511] x15: 0000000000000000 x14: 0000000000000000
[   17.543652] x13: ffff000008d95db8 x12: 000000000000000d
[   17.552780] x11: ffff000008d95d90 x10: 0000000000000b00
[   17.561819] x9 : ffff000100d9bb90 x8 : ffff802fb89d6560
[   17.570829] x7 : 0000000000000004 x6 : 00000004a1801d05
[   17.579839] x5 : 0000000000000000 x4 : 0000000000000000
[   17.588852] x3 : ffff802fb89d5a00 x2 : 0000000000000000
[   17.597734] x1 : 0000000200000000 x0 : 0000000200000000
[   17.606631] Process kworker/u130:0 (pid: 95, stack limit = 0x(____ptrval____))
[   17.617438] Call trace:
[   17.623349]  __mutex_lock.isra.1+0x74/0x540
[   17.630927]  __mutex_lock_slowpath+0x24/0x30
[   17.638602]  mutex_lock+0x50/0x60
[   17.645295]  drain_workqueue+0x34/0x198
[   17.652623]  __sas_drain_work+0x7c/0x168
[   17.659903]  sas_drain_work+0x60/0x68
[   17.666947]  hisi_sas_scan_finished+0x30/0x40 [hisi_sas_main]
[   17.676129]  do_scsi_scan_host+0x70/0xb0
[   17.683534]  do_scan_async+0x20/0x228
[   17.690586]  async_run_entry_fn+0x4c/0x1d0
[   17.697997]  process_one_work+0x1b4/0x3f8
[   17.705296]  worker_thread+0x54/0x470

Every time the call trace is not the same, but the overwrite address
is always the same:
Unable to handle kernel paging request at virtual address 0000000200000040

The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG,
didn't use the io_base offset.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
index ba4316910dea..a60f207768fc 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
@@ -129,7 +129,7 @@ static void hns_xgmac_lf_rf_control_init(struct mac_driver *mac_drv)
 	dsaf_set_bit(val, XGMAC_UNIDIR_EN_B, 0);
 	dsaf_set_bit(val, XGMAC_RF_TX_EN_B, 1);
 	dsaf_set_field(val, XGMAC_LF_RF_INSERT_M, XGMAC_LF_RF_INSERT_S, 0);
-	dsaf_write_reg(mac_drv, XGMAC_MAC_TX_LF_RF_CONTROL_REG, val);
+	dsaf_write_dev(mac_drv, XGMAC_MAC_TX_LF_RF_CONTROL_REG, val);
 }
 
 /**
-- 
2.19.1

[PATCH AUTOSEL 4.19 40/52] net: hns: fix ICMP6 neighbor solicitation messages discard problem

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit f058e46855dcbc28edb2ed4736f38a71fd19cadb ]

ICMP6 neighbor solicitation messages will be discard by the Hip06
chips, because of not setting forwarding pool. Enable promisc mode
has the same problem.

This patch fix the wrong forwarding table configs for the multicast
vague matching when enable promisc mode, and add forwarding pool
for the forwarding table.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/hisilicon/hns/hns_dsaf_main.c    | 33 +++++++++++++++----
 1 file changed, 27 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
index b8155f5e71b4..fdff5526d2e8 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
@@ -2750,6 +2750,17 @@ int hns_dsaf_get_regs_count(void)
 	return DSAF_DUMP_REGS_NUM;
 }
 
+static int hns_dsaf_get_port_id(u8 port)
+{
+	if (port < DSAF_SERVICE_NW_NUM)
+		return port;
+
+	if (port >= DSAF_BASE_INNER_PORT_NUM)
+		return port - DSAF_BASE_INNER_PORT_NUM + DSAF_SERVICE_NW_NUM;
+
+	return -EINVAL;
+}
+
 static void set_promisc_tcam_enable(struct dsaf_device *dsaf_dev, u32 port)
 {
 	struct dsaf_tbl_tcam_ucast_cfg tbl_tcam_ucast = {0, 1, 0, 0, 0x80};
@@ -2815,23 +2826,33 @@ static void set_promisc_tcam_enable(struct dsaf_device *dsaf_dev, u32 port)
 	memset(&temp_key, 0x0, sizeof(temp_key));
 	mask_entry.addr[0] = 0x01;
 	hns_dsaf_set_mac_key(dsaf_dev, &mask_key, mask_entry.in_vlan_id,
-			     port, mask_entry.addr);
+			     0xf, mask_entry.addr);
 	tbl_tcam_mcast.tbl_mcast_item_vld = 1;
 	tbl_tcam_mcast.tbl_mcast_old_en = 0;
 
-	if (port < DSAF_SERVICE_NW_NUM) {
-		mskid = port;
-	} else if (port >= DSAF_BASE_INNER_PORT_NUM) {
-		mskid = port - DSAF_BASE_INNER_PORT_NUM + DSAF_SERVICE_NW_NUM;
-	} else {
+	/* set MAC port to handle multicast */
+	mskid = hns_dsaf_get_port_id(port);
+	if (mskid == -EINVAL) {
 		dev_err(dsaf_dev->dev, "%s,pnum(%d)error,key(%#x:%#x)\n",
 			dsaf_dev->ae_dev.name, port,
 			mask_key.high.val, mask_key.low.val);
 		return;
 	}
+	dsaf_set_bit(tbl_tcam_mcast.tbl_mcast_port_msk[mskid / 32],
+		     mskid % 32, 1);
 
+	/* set pool bit map to handle multicast */
+	mskid = hns_dsaf_get_port_id(port_num);
+	if (mskid == -EINVAL) {
+		dev_err(dsaf_dev->dev,
+			"%s, pool bit map pnum(%d)error,key(%#x:%#x)\n",
+			dsaf_dev->ae_dev.name, port_num,
+			mask_key.high.val, mask_key.low.val);
+		return;
+	}
 	dsaf_set_bit(tbl_tcam_mcast.tbl_mcast_port_msk[mskid / 32],
 		     mskid % 32, 1);
+
 	memcpy(&temp_key, &mask_key, sizeof(mask_key));
 	hns_dsaf_tcam_mc_cfg_vague(dsaf_dev, entry_index, &tbl_tcam_data_mc,
 				   (struct dsaf_tbl_tcam_data *)(&mask_key),
-- 
2.19.1

[PATCH AUTOSEL 4.19 41/52] net: hns: Fix WARNING when remove HNS driver with SMMU enabled

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 8601a99d7c0256b7a7fdd1ab14cf6c1f1dfcadc6 ]

When enable SMMU, remove HNS driver will cause a WARNING:

[  141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8
[  141.954673] Modules linked in: hns_enet_drv(-)
[  141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G        W         5.0.0-rc1-28723-gb729c57de95c-dirty #32
[  141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017
[  142.000244] pstate: 60000005 (nZCv daif -PAN -UAO)
[  142.009886] pc : __iommu_dma_unmap+0xc0/0xc8
[  142.018476] lr : __iommu_dma_unmap+0xc0/0xc8
[  142.027066] sp : ffff000013533b90
[  142.033728] x29: ffff000013533b90 x28: ffff8013e6983600
[  142.044420] x27: 0000000000000000 x26: 0000000000000000
[  142.055113] x25: 0000000056000000 x24: 0000000000000015
[  142.065806] x23: 0000000000000028 x22: ffff8013e66eee68
[  142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000
[  142.087192] x19: 0000000000001000 x18: 0000000000000007
[  142.097885] x17: 000000000000000e x16: 0000000000000001
[  142.108578] x15: 0000000000000019 x14: 363139343a70616d
[  142.119270] x13: 6e75656761705f67 x12: 0000000000000000
[  142.129963] x11: 00000000ffffffff x10: 0000000000000006
[  142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0
[  142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8
[  142.162042] x5 : 0000000000000000 x4 : 0000000000000000
[  142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500
[  142.183427] x1 : 0000000000000000 x0 : 0000000000000035
[  142.194120] Call trace:
[  142.199030]  __iommu_dma_unmap+0xc0/0xc8
[  142.206920]  iommu_dma_unmap_page+0x20/0x28
[  142.215335]  __iommu_unmap_page+0x40/0x60
[  142.223399]  hnae_unmap_buffer+0x110/0x134
[  142.231639]  hnae_free_desc+0x6c/0x10c
[  142.239177]  hnae_fini_ring+0x14/0x34
[  142.246540]  hnae_fini_queue+0x2c/0x40
[  142.254080]  hnae_put_handle+0x38/0xcc
[  142.261619]  hns_nic_dev_remove+0x54/0xfc [hns_enet_drv]
[  142.272312]  platform_drv_remove+0x24/0x64
[  142.280552]  device_release_driver_internal+0x17c/0x20c
[  142.291070]  driver_detach+0x4c/0x90
[  142.298259]  bus_remove_driver+0x5c/0xd8
[  142.306148]  driver_unregister+0x2c/0x54
[  142.314037]  platform_driver_unregister+0x10/0x18
[  142.323505]  hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv]
[  142.335248]  __arm64_sys_delete_module+0x214/0x25c
[  142.344891]  el0_svc_common+0xb0/0x10c
[  142.352430]  el0_svc_handler+0x24/0x80
[  142.359968]  el0_svc+0x8/0x7c0
[  142.366104] ---[ end trace 60ad1cd58e63c407 ]---

The tx ring buffer map when xmit and unmap when xmit done. So in
hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring()
have a unmap operation for tx ring buffer, which is already unmapped
when xmit done, than cause this WARNING.

The hnae_alloc_buffers() is called in hnae_init_ring(),
so the hnae_free_buffers() should be in hnae_fini_ring(), not in
hnae_free_desc().

In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring().
When the ring buffer is tx ring, adds a piece of code to ensure that
the tx ring is unmap.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hnae.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.c b/drivers/net/ethernet/hisilicon/hns/hnae.c
index 79d03f8ee7b1..c7fa97a7e1f4 100644
--- a/drivers/net/ethernet/hisilicon/hns/hnae.c
+++ b/drivers/net/ethernet/hisilicon/hns/hnae.c
@@ -150,7 +150,6 @@ static int hnae_alloc_buffers(struct hnae_ring *ring)
 /* free desc along with its attached buffer */
 static void hnae_free_desc(struct hnae_ring *ring)
 {
-	hnae_free_buffers(ring);
 	dma_unmap_single(ring_to_dev(ring), ring->desc_dma_addr,
 			 ring->desc_num * sizeof(ring->desc[0]),
 			 ring_to_dma_dir(ring));
@@ -183,6 +182,9 @@ static int hnae_alloc_desc(struct hnae_ring *ring)
 /* fini ring, also free the buffer for the ring */
 static void hnae_fini_ring(struct hnae_ring *ring)
 {
+	if (is_rx_ring(ring))
+		hnae_free_buffers(ring);
+
 	hnae_free_desc(ring);
 	kfree(ring->desc_cb);
 	ring->desc_cb = NULL;
-- 
2.19.1

[PATCH AUTOSEL 4.19 42/52] libcxgb: fix incorrect ppmax calculation

[Sasha Levin]

From: Varun Prakash <varun@chelsio.com>

[ Upstream commit cc5a726c79158bd307150e8d4176ec79b52001ea ]

BITS_TO_LONGS() uses DIV_ROUND_UP() because of
this ppmax value can be greater than available
per cpu page pods.

This patch removes BITS_TO_LONGS() to fix this
issue.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c
index 74849be5f004..e2919005ead3 100644
--- a/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c
+++ b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c
@@ -354,7 +354,10 @@ static struct cxgbi_ppm_pool *ppm_alloc_cpu_pool(unsigned int *total,
 		ppmax = max;
 
 	/* pool size must be multiple of unsigned long */
-	bmap = BITS_TO_LONGS(ppmax);
+	bmap = ppmax / BITS_PER_TYPE(unsigned long);
+	if (!bmap)
+		return NULL;
+
 	ppmax = (bmap * sizeof(unsigned long)) << 3;
 
 	alloc_sz = sizeof(*pools) + sizeof(unsigned long) * bmap;
@@ -402,6 +405,10 @@ int cxgbi_ppm_init(void **ppm_pp, struct net_device *ndev,
 	if (reserve_factor) {
 		ppmax_pool = ppmax / reserve_factor;
 		pool = ppm_alloc_cpu_pool(&ppmax_pool, &pool_index_max);
+		if (!pool) {
+			ppmax_pool = 0;
+			reserve_factor = 0;
+		}
 
 		pr_debug("%s: ppmax %u, cpu total %u, per cpu %u.\n",
 			 ndev->name, ppmax, ppmax_pool, pool_index_max);
-- 
2.19.1