From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Arvind Sankar <niveditas98@gmail.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
Sasha Levin <sashal@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 08/35] igb: Fix WARN_ONCE on runtime suspend
Date: Wed, 24 Apr 2019 10:46:42 -0400 [thread overview]
Message-ID: <20190424144709.30215-8-sashal@kernel.org> (raw)
In-Reply-To: <20190424144709.30215-1-sashal@kernel.org>
From: Arvind Sankar <niveditas98@gmail.com>
[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ]
The runtime_suspend device callbacks are not supposed to save
configuration state or change the power state. Commit fb29f76cc566
("igb: Fix an issue that PME is not enabled during runtime suspend")
changed the driver to not save configuration state during runtime
suspend, however the driver callback still put the device into a
low-power state. This causes a warning in the pci pm core and results in
pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.
Fix this by not changing the power state either, leaving that to pci pm
core, and make the same change for suspend callback as well.
Also move a couple of defines into the appropriate header file instead
of inline in the .c file.
Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend")
Signed-off-by: Arvind Sankar <niveditas98@gmail.com>
Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/intel/igb/e1000_defines.h | 2 +
drivers/net/ethernet/intel/igb/igb_main.c | 57 +++----------------
2 files changed, 10 insertions(+), 49 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 1de82f247312..d258a75c934b 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -214,6 +214,8 @@
/* enable link status from external LINK_0 and LINK_1 pins */
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */
+#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */
#define E1000_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */
#define E1000_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */
#define E1000_CTRL_RST 0x04000000 /* Global reset */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 8892ea5cbb01..71b235f935d9 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7934,9 +7934,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
struct e1000_hw *hw = &adapter->hw;
u32 ctrl, rctl, status;
u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
-#ifdef CONFIG_PM
- int retval = 0;
-#endif
+ bool wake;
rtnl_lock();
netif_device_detach(netdev);
@@ -7949,14 +7947,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
igb_clear_interrupt_scheme(adapter);
rtnl_unlock();
-#ifdef CONFIG_PM
- if (!runtime) {
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
- }
-#endif
-
status = rd32(E1000_STATUS);
if (status & E1000_STATUS_LU)
wufc &= ~E1000_WUFC_LNKC;
@@ -7973,10 +7963,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
}
ctrl = rd32(E1000_CTRL);
- /* advertise wake from D3Cold */
- #define E1000_CTRL_ADVD3WUC 0x00100000
- /* phy power management enable */
- #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
ctrl |= E1000_CTRL_ADVD3WUC;
wr32(E1000_CTRL, ctrl);
@@ -7990,12 +7976,15 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
wr32(E1000_WUFC, 0);
}
- *enable_wake = wufc || adapter->en_mng_pt;
- if (!*enable_wake)
+ wake = wufc || adapter->en_mng_pt;
+ if (!wake)
igb_power_down_link(adapter);
else
igb_power_up_link(adapter);
+ if (enable_wake)
+ *enable_wake = wake;
+
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant.
*/
@@ -8038,22 +8027,7 @@ static void igb_deliver_wake_packet(struct net_device *netdev)
static int __maybe_unused igb_suspend(struct device *dev)
{
- int retval;
- bool wake;
- struct pci_dev *pdev = to_pci_dev(dev);
-
- retval = __igb_shutdown(pdev, &wake, 0);
- if (retval)
- return retval;
-
- if (wake) {
- pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- pci_set_power_state(pdev, PCI_D3hot);
- }
-
- return 0;
+ return __igb_shutdown(to_pci_dev(dev), NULL, 0);
}
static int __maybe_unused igb_resume(struct device *dev)
@@ -8124,22 +8098,7 @@ static int __maybe_unused igb_runtime_idle(struct device *dev)
static int __maybe_unused igb_runtime_suspend(struct device *dev)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- int retval;
- bool wake;
-
- retval = __igb_shutdown(pdev, &wake, 1);
- if (retval)
- return retval;
-
- if (wake) {
- pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- pci_set_power_state(pdev, PCI_D3hot);
- }
-
- return 0;
+ return __igb_shutdown(to_pci_dev(dev), NULL, 1);
}
static int __maybe_unused igb_runtime_resume(struct device *dev)
--
2.19.1
next prev parent reply other threads:[~2019-04-24 14:59 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190424144709.30215-1-sashal@kernel.org>
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 04/35] batman-adv: Reduce claim hash refcnt only for removed entry Sasha Levin
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 05/35] batman-adv: Reduce tt_local " Sasha Levin
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 06/35] batman-adv: Reduce tt_global " Sasha Levin
2019-04-24 14:46 ` Sasha Levin [this message]
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 09/35] fm10k: Fix a potential NULL pointer dereference Sasha Levin
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 10/35] net/mlx5: E-Switch, Fix esw manager vport indication for more vport commands Sasha Levin
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 11/35] bonding: show full hw address in sysfs for slave entries Sasha Levin
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 12/35] net: stmmac: ratelimit RX error logs Sasha Levin
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 13/35] net: stmmac: don't overwrite discard_frame status Sasha Levin
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 14/35] net: stmmac: fix dropping of multi-descriptor RX frames Sasha Levin
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 15/35] net: stmmac: don't log oversized frames Sasha Levin
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 17/35] debugfs: fix use-after-free on symlink traversal Sasha Levin
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 24/35] net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw() Sasha Levin
2019-04-24 14:46 ` [PATCH AUTOSEL 4.14 25/35] net: hns: Use NAPI_POLL_WEIGHT for hns driver Sasha Levin
2019-04-24 14:47 ` [PATCH AUTOSEL 4.14 26/35] net: hns: Fix probabilistic memory overwrite when HNS driver initialized Sasha Levin
2019-04-24 14:47 ` [PATCH AUTOSEL 4.14 27/35] net: hns: fix ICMP6 neighbor solicitation messages discard problem Sasha Levin
2019-04-24 14:47 ` [PATCH AUTOSEL 4.14 28/35] net: hns: Fix WARNING when remove HNS driver with SMMU enabled Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190424144709.30215-8-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=jeffrey.t.kirsher@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=niveditas98@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).