netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
To: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: netdev@vger.kernel.org,
	Ilias Apalodimas <ilias.apalodimas@linaro.org>,
	Andrew Lunn <andrew@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Jiri Pirko <jiri@resnulli.us>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Sekhar Nori <nsekhar@ti.com>,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	Murali Karicheri <m-karicheri2@ti.com>,
	Ivan Vecera <ivecera@redhat.com>
Subject: Re: [RFC PATCH v3 net-next 03/11] net: ethernet: ti: cpsw: ale: add functions to modify VLANs/MDBs
Date: Fri, 26 Apr 2019 13:41:57 +0300	[thread overview]
Message-ID: <20190426104156.GA2796@khorivan> (raw)
In-Reply-To: <1556144667-27997-4-git-send-email-grygorii.strashko@ti.com>

On Thu, Apr 25, 2019 at 01:24:19AM +0300, Grygorii Strashko wrote:
>From: Ilias Apalodimas <ilias.apalodimas@linaro.org>
>
>A following patch introduces switchdev functionality. Add functions
>to cpsw ALE engine to modify VLANs/MDBs
>
>Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
>Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>---
> drivers/net/ethernet/ti/cpsw_ale.c | 179 ++++++++++++++++++++++++++++-
> drivers/net/ethernet/ti/cpsw_ale.h |  10 ++
> 2 files changed, 187 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
>index d09768368dbd..add3f6e4917b 100644
>--- a/drivers/net/ethernet/ti/cpsw_ale.c
>+++ b/drivers/net/ethernet/ti/cpsw_ale.c
>@@ -400,6 +400,45 @@ int cpsw_ale_del_mcast(struct cpsw_ale *ale, const u8 *addr, int port_mask,
> 	return 0;
> }
>
>+static int cpsw_ale_read_mc(struct cpsw_ale *ale, u8 *addr, int flags, u16 vid)
See below.

>+{
>+	u32 ale_entry[ALE_ENTRY_WORDS] = {0, 0, 0};
>+	int idx;
>+
>+	idx = cpsw_ale_match_addr(ale, addr, (flags & ALE_VLAN) ? vid : 0);
>+	if (idx >= 0)
>+		cpsw_ale_read(ale, idx, ale_entry);
>+
>+	return cpsw_ale_get_port_mask(ale_entry, ale->port_mask_bits);
>+}
>+
>+int cpsw_ale_mcast_add_modify(struct cpsw_ale *ale, u8 *addr, int port_mask,
>+			      int flags, u16 vid, int mcast_state)
>+{
>+	int mcast_members, ret;
>+
>+	mcast_members = cpsw_ale_read_mc(ale, addr, flags, vid) | port_mask;
>+	ret = cpsw_ale_add_mcast(ale, addr, mcast_members, flags, vid,
>+				 mcast_state);
By fact, cpsw_ale_add_mcast() is doing modify itself already, just name is
different.

These 3 func duplicate the existent functionality as result code is done twice.
Better remove/combine them and rename existent ones, like:
cpsw_ale_add_mcast() -> cpsw_ale_add_mcast_modify()
cpsw_ale_del_mcast() -> cpsw_ale_del_mcast_modify()

>+
>+	return ret;
>+}
>+
>+int cpsw_ale_mcast_del_modify(struct cpsw_ale *ale, u8 *addr, int port_mask,
>+			      int flags, u16 vid)
See above.

>+{
>+	int mcast_members, ret;
>+	int idx;
>+
>+	mcast_members = cpsw_ale_read_mc(ale, addr, flags, vid) & ~port_mask;
>+	idx = cpsw_ale_match_addr(ale, addr, (flags & ALE_VLAN) ? vid : 0);
>+	if (idx < 0)
>+		return 0;
>+	ret = cpsw_ale_del_mcast(ale, addr, mcast_members, flags, vid);
>+
>+	return ret;
>+}
>+

[...]

-- 
Regards,
Ivan Khoronzhuk

  reply	other threads:[~2019-04-26 10:42 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-24 22:24 [RFC PATCH v3 net-next 00/11] net: ethernet: ti: introduce new cpsw switchdev based driver Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 01/11] net: ethernet: ti: cpts: use devm_get_clk_from_child Grygorii Strashko
2019-04-24 22:46   ` Andrew Lunn
2019-04-25 10:05     ` Grygorii Strashko
2019-04-25 12:18       ` Andrew Lunn
2019-04-24 22:24 ` [RFC PATCH v3 net-next 02/11] net: ethernet: ti: cpsw: move set of common functions in cpsw_priv Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 03/11] net: ethernet: ti: cpsw: ale: add functions to modify VLANs/MDBs Grygorii Strashko
2019-04-26 10:41   ` Ivan Khoronzhuk [this message]
2019-04-26 10:53     ` Ilias Apalodimas
2019-04-24 22:24 ` [RFC PATCH v3 net-next 04/11] net: ethernet: ti: cpsw: allow untagged traffic on host port Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 05/11] net: ethernet: ti: cpsw: add switchdev API for cpsw driver Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 06/11] dt-bindings: net: ti: add new cpsw switch driver bindings Grygorii Strashko
2019-04-25 22:40   ` Andrew Lunn
2019-04-26  7:50     ` Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 07/11] net: ethernet: ti: cpsw: introduce cpsw switch driver based on switchdev Grygorii Strashko
2019-04-25 23:44   ` Andrew Lunn
2019-04-24 22:24 ` [RFC PATCH v3 net-next 08/11] net: ethernet: ti: cpsw: fix build of cpsw drivers Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 09/11] phy: ti: phy-gmii-sel: dependency from ti cpsw-switchdev driver Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 10/11] Documentation: networking: add cpsw switchdev based driver documentation Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 11/11] ARM: dts: am57xx-idk: add dt nodes for new cpsw switch dev driver Grygorii Strashko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190426104156.GA2796@khorivan \
    --to=ivan.khoronzhuk@linaro.org \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=ivecera@redhat.com \
    --cc=jiri@resnulli.us \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=m-karicheri2@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).