netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Grygorii Strashko <grygorii.strashko@ti.com>,
	"David S . Miller" <davem@davemloft.net>,
	Sasha Levin <sashal@kernel.org>,
	linux-omap@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.1 067/375] net: ethernet: ti: cpsw: fix allmulti cfg in dual_mac mode
Date: Wed, 22 May 2019 15:16:07 -0400	[thread overview]
Message-ID: <20190522192115.22666-67-sashal@kernel.org> (raw)
In-Reply-To: <20190522192115.22666-1-sashal@kernel.org>

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 06095f34f8a0a2c4c83a19514c272699edd5f80b ]

Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood
Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port
belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is
working in non dual_mac mode, but in dual_mac - it causes
enabling/disabling ALLMULTI flag for both ports.

Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to
specify ALE port number for which ALLMULTI has to be enabled and check if
port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/cpsw.c     | 12 +++++++++---
 drivers/net/ethernet/ti/cpsw_ale.c | 19 ++++++++++---------
 drivers/net/ethernet/ti/cpsw_ale.h |  3 +--
 3 files changed, 20 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index a591583d120e1..dd12b73a88530 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -800,12 +800,17 @@ static int cpsw_purge_all_mc(struct net_device *ndev, const u8 *addr, int num)
 
 static void cpsw_ndo_set_rx_mode(struct net_device *ndev)
 {
-	struct cpsw_common *cpsw = ndev_to_cpsw(ndev);
+	struct cpsw_priv *priv = netdev_priv(ndev);
+	struct cpsw_common *cpsw = priv->cpsw;
+	int slave_port = -1;
+
+	if (cpsw->data.dual_emac)
+		slave_port = priv->emac_port + 1;
 
 	if (ndev->flags & IFF_PROMISC) {
 		/* Enable promiscuous mode */
 		cpsw_set_promiscious(ndev, true);
-		cpsw_ale_set_allmulti(cpsw->ale, IFF_ALLMULTI);
+		cpsw_ale_set_allmulti(cpsw->ale, IFF_ALLMULTI, slave_port);
 		return;
 	} else {
 		/* Disable promiscuous mode */
@@ -813,7 +818,8 @@ static void cpsw_ndo_set_rx_mode(struct net_device *ndev)
 	}
 
 	/* Restore allmulti on vlans if necessary */
-	cpsw_ale_set_allmulti(cpsw->ale, ndev->flags & IFF_ALLMULTI);
+	cpsw_ale_set_allmulti(cpsw->ale,
+			      ndev->flags & IFF_ALLMULTI, slave_port);
 
 	/* add/remove mcast address either for real netdev or for vlan */
 	__hw_addr_ref_sync_dev(&ndev->mc, ndev, cpsw_add_mc_addr,
diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index 798c989d5d934..b3d9591b4824a 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -482,24 +482,25 @@ int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port_mask)
 }
 EXPORT_SYMBOL_GPL(cpsw_ale_del_vlan);
 
-void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti)
+void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti, int port)
 {
 	u32 ale_entry[ALE_ENTRY_WORDS];
-	int type, idx;
 	int unreg_mcast = 0;
-
-	/* Only bother doing the work if the setting is actually changing */
-	if (ale->allmulti == allmulti)
-		return;
-
-	/* Remember the new setting to check against next time */
-	ale->allmulti = allmulti;
+	int type, idx;
 
 	for (idx = 0; idx < ale->params.ale_entries; idx++) {
+		int vlan_members;
+
 		cpsw_ale_read(ale, idx, ale_entry);
 		type = cpsw_ale_get_entry_type(ale_entry);
 		if (type != ALE_TYPE_VLAN)
 			continue;
+		vlan_members =
+			cpsw_ale_get_vlan_member_list(ale_entry,
+						      ale->vlan_field_bits);
+
+		if (port != -1 && !(vlan_members & BIT(port)))
+			continue;
 
 		unreg_mcast =
 			cpsw_ale_get_vlan_unreg_mcast(ale_entry,
diff --git a/drivers/net/ethernet/ti/cpsw_ale.h b/drivers/net/ethernet/ti/cpsw_ale.h
index cd07a3e96d576..1fe196d8a5e42 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.h
+++ b/drivers/net/ethernet/ti/cpsw_ale.h
@@ -37,7 +37,6 @@ struct cpsw_ale {
 	struct cpsw_ale_params	params;
 	struct timer_list	timer;
 	unsigned long		ageout;
-	int			allmulti;
 	u32			version;
 	/* These bits are different on NetCP NU Switch ALE */
 	u32			port_mask_bits;
@@ -116,7 +115,7 @@ int cpsw_ale_del_mcast(struct cpsw_ale *ale, const u8 *addr, int port_mask,
 int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag,
 			int reg_mcast, int unreg_mcast);
 int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port);
-void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti);
+void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti, int port);
 
 int cpsw_ale_control_get(struct cpsw_ale *ale, int port, int control);
 int cpsw_ale_control_set(struct cpsw_ale *ale, int port,
-- 
2.20.1


  parent reply	other threads:[~2019-05-22 20:00 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190522192115.22666-1-sashal@kernel.org>
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 002/375] cxgb4: Fix error path in cxgb4_init_module Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 010/375] batman-adv: mcast: fix multicast tt/tvlv worker locking Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 011/375] ip6: fix skb leak in ip6frag_expire_frag_queue() Sasha Levin
2019-05-23  7:47   ` Stefan Bader
2019-05-29 18:48     ` Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 012/375] tools/bpf: fix perf build error with uClibc (seen on ARC) Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 013/375] i40e: Fix of memory leak and integer truncation in i40e_virtchnl.c Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 014/375] libbpf: fix invalid munmap call Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 015/375] selftests/bpf: set RLIMIT_MEMLOCK properly for test_libbpf_open.c Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 016/375] bpftool: exclude bash-completion/bpftool from .gitignore pattern Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 017/375] ice: Separate if conditions for ice_set_features() Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 018/375] ice: Preserve VLAN Rx stripping settings Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 022/375] net: ena: gcc 8: fix compilation warning Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 023/375] net: ena: fix: set freed objects to NULL to avoid failing future allocations Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 024/375] hv_netvsc: fix race that may miss tx queue wakeup Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 026/375] Bluetooth: Ignore CC events not matching the last HCI command Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 040/375] net/mlx5: E-Switch, Use atomic rep state to serialize state change Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 041/375] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler() Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 047/375] mt76: remove mt76_queue dependency from tx_queue_skb function pointer Sasha Levin
2019-05-22 19:15 ` [PATCH AUTOSEL 5.1 055/375] x86/modules: Avoid breaking W^X while loading modules Sasha Levin
2019-05-22 19:16 ` [PATCH AUTOSEL 5.1 060/375] iwlwifi: pcie: don't crash on invalid RX interrupt Sasha Levin
2019-05-22 19:16 ` Sasha Levin [this message]
2019-05-22 19:16 ` [PATCH AUTOSEL 5.1 069/375] net: hns3: fix pause configure fail problem Sasha Levin
2019-05-22 19:16 ` [PATCH AUTOSEL 5.1 070/375] net: hns3: fix for TX clean num when cleaning TX BD Sasha Levin
2019-05-22 19:16 ` [PATCH AUTOSEL 5.1 071/375] net: phy: improve genphy_soft_reset Sasha Levin
2019-05-22 19:16 ` [PATCH AUTOSEL 5.1 074/375] net: hns3: use atomic_t replace u32 for arq's count Sasha Levin
2019-05-22 19:16 ` [PATCH AUTOSEL 5.1 076/375] mac80211/cfg80211: update bss channel on channel switch Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190522192115.22666-67-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=davem@davemloft.net \
    --cc=grygorii.strashko@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).