[PATCH AUTOSEL 4.9 002/114] cxgb4: Fix error path in cxgb4_init_module

[PATCH AUTOSEL 4.9 002/114] cxgb4: Fix error path in cxgb4_init_module

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit a3147770bea76c8dbad73eca3a24c2118da5e719 ]

BUG: unable to handle kernel paging request at ffffffffa016a270
PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bbd067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:atomic_notifier_chain_register+0x24/0x60
Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08
RSP: 0018:ffffc90000e2bc60 EFLAGS: 00010086
RAX: 0000000000000292 RBX: ffffffff83467240 RCX: ffffffff83467278
RDX: ffffffffa016a260 RSI: ffffffff83752140 RDI: ffffffff83467240
RBP: ffffc90000e2bc70 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 00000000014fa61f R12: ffffffffa01c8260
R13: ffff888231091e00 R14: 0000000000000000 R15: ffffc90000e2be78
FS:  00007fbd8d7cd540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa016a270 CR3: 000000022c7e3000 CR4: 00000000000006f0
Call Trace:
 register_inet6addr_notifier+0x13/0x20
 cxgb4_init_module+0x6c/0x1000 [cxgb4
 ? 0xffffffffa01d7000
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

If pci_register_driver fails, register inet6addr_notifier is
pointless. This patch fix the error path in cxgb4_init_module.

Fixes: b5a02f503caa ("cxgb4 : Update ipv6 address handling api")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index c71a52a2f8017..5478a2ab45c4c 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -5203,15 +5203,24 @@ static int __init cxgb4_init_module(void)
 
 	ret = pci_register_driver(&cxgb4_driver);
 	if (ret < 0)
-		debugfs_remove(cxgb4_debugfs_root);
+		goto err_pci;
 
 #if IS_ENABLED(CONFIG_IPV6)
 	if (!inet6addr_registered) {
-		register_inet6addr_notifier(&cxgb4_inet6addr_notifier);
-		inet6addr_registered = true;
+		ret = register_inet6addr_notifier(&cxgb4_inet6addr_notifier);
+		if (ret)
+			pci_unregister_driver(&cxgb4_driver);
+		else
+			inet6addr_registered = true;
 	}
 #endif
 
+	if (ret == 0)
+		return ret;
+
+err_pci:
+	debugfs_remove(cxgb4_debugfs_root);
+
 	return ret;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 005/114] net: ena: gcc 8: fix compilation warning

[Sasha Levin]

From: Sameeh Jubran <sameehj@amazon.com>

[ Upstream commit f913308879bc6ae437ce64d878c7b05643ddea44 ]

GCC 8 contains a number of new warnings as well as enhancements to existing
checkers. The warning - Wstringop-truncation - warns for calls to bounded
string manipulation functions such as strncat, strncpy, and stpncpy that
may either truncate the copied string or leave the destination unchanged.

In our case the destination string length (32 bytes) is much shorter than
the source string (64 bytes) which causes this warning to show up. In
general the destination has to be at least a byte larger than the length
of the source string with strncpy for this warning not to showup.

This can be easily fixed by using strlcpy instead which already does the
truncation to the string. Documentation for this function can be
found here:

https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 0c298878bf46f..0780900b37c72 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -2116,7 +2116,7 @@ static void ena_config_host_info(struct ena_com_dev *ena_dev)
 
 	host_info->os_type = ENA_ADMIN_OS_LINUX;
 	host_info->kernel_ver = LINUX_VERSION_CODE;
-	strncpy(host_info->kernel_ver_str, utsname()->version,
+	strlcpy(host_info->kernel_ver_str, utsname()->version,
 		sizeof(host_info->kernel_ver_str) - 1);
 	host_info->os_dist = 0;
 	strncpy(host_info->os_dist_str, utsname()->release,
-- 
2.20.1

[PATCH AUTOSEL 4.9 011/114] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e025da3d7aa4770bb1d1b3b0aa7cc4da1744852d ]

If "ret_len" is negative then it could lead to a NULL dereference.

The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative
then we don't allocate the "dcmd_buf" buffer.  Then we pass "ret_len" to
brcmf_fil_cmd_data_set() where it is cast to a very high u32 value.
Most of the functions in that call tree check whether the buffer we pass
is NULL but there are at least a couple places which don't such as
brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd().  We memcpy() to and
from the buffer so it would result in a NULL dereference.

The fix is to change the types so that "ret_len" can't be negative.  (If
we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an
issue).

Fixes: 1bacb0487d0e ("brcmfmac: replace cfg80211 testmode with vendor command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
index 8eff2753abade..d493021f60318 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
@@ -35,9 +35,10 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
 	struct brcmf_if *ifp;
 	const struct brcmf_vndr_dcmd_hdr *cmdhdr = data;
 	struct sk_buff *reply;
-	int ret, payload, ret_len;
+	unsigned int payload, ret_len;
 	void *dcmd_buf = NULL, *wr_pointer;
 	u16 msglen, maxmsglen = PAGE_SIZE - 0x100;
+	int ret;
 
 	if (len < sizeof(*cmdhdr)) {
 		brcmf_err("vendor command too short: %d\n", len);
@@ -65,7 +66,7 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
 			brcmf_err("oversize return buffer %d\n", ret_len);
 			ret_len = BRCMF_DCMD_MAXLEN;
 		}
-		payload = max(ret_len, len) + 1;
+		payload = max_t(unsigned int, ret_len, len) + 1;
 		dcmd_buf = vzalloc(payload);
 		if (NULL == dcmd_buf)
 			return -ENOMEM;
-- 
2.20.1

[PATCH AUTOSEL 4.9 016/114] iwlwifi: pcie: don't crash on invalid RX interrupt

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 30f24eabab8cd801064c5c37589d803cb4341929 ]

If for some reason the device gives us an RX interrupt before we're
ready for it, perhaps during device power-on with misconfigured IRQ
causes mapping or so, we can crash trying to access the queues.

Prevent that by checking that we actually have RXQs and that they
were properly allocated.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index c21f8bd32d08f..25f2a0aceaa21 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -1225,10 +1225,15 @@ static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans,
 static void iwl_pcie_rx_handle(struct iwl_trans *trans, int queue)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-	struct iwl_rxq *rxq = &trans_pcie->rxq[queue];
+	struct iwl_rxq *rxq;
 	u32 r, i, count = 0;
 	bool emergency = false;
 
+	if (WARN_ON_ONCE(!trans_pcie->rxq || !trans_pcie->rxq[queue].bd))
+		return;
+
+	rxq = &trans_pcie->rxq[queue];
+
 restart:
 	spin_lock(&rxq->lock);
 	/* uCode's read index (stored in shared DRAM) indicates the last Rx
-- 
2.20.1

[PATCH AUTOSEL 4.9 020/114] mac80211/cfg80211: update bss channel on channel switch

[Sasha Levin]

From: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>

[ Upstream commit 5dc8cdce1d722c733f8c7af14c5fb595cfedbfa8 ]

FullMAC STAs have no way to update bss channel after CSA channel switch
completion. As a result, user-space tools may provide inconsistent
channel info. For instance, consider the following two commands:
$ sudo iw dev wlan0 link
$ sudo iw dev wlan0 info
The latter command gets channel info from the hardware, so most probably
its output will be correct. However the former command gets channel info
from scan cache, so its output will contain outdated channel info.
In fact, current bss channel info will not be updated until the
next [re-]connect.

Note that mac80211 STAs have a workaround for this, but it requires
access to internal cfg80211 data, see ieee80211_chswitch_work:

	/* XXX: shouldn't really modify cfg80211-owned data! */
	ifmgd->associated->channel = sdata->csa_chandef.chan;

This patch suggests to convert mac80211 workaround into cfg80211 behavior
and to update current bss channel in cfg80211_ch_switch_notify.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c    | 3 ---
 net/wireless/nl80211.c | 5 +++++
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 6e0aa296f1346..d787717140e54 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1072,9 +1072,6 @@ static void ieee80211_chswitch_work(struct work_struct *work)
 		goto out;
 	}
 
-	/* XXX: shouldn't really modify cfg80211-owned data! */
-	ifmgd->associated->channel = sdata->csa_chandef.chan;
-
 	ifmgd->csa_waiting_bcn = true;
 
 	ieee80211_sta_reset_beacon_monitor(sdata);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 09a353c6373a8..d6e6293157717 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -14014,6 +14014,11 @@ void cfg80211_ch_switch_notify(struct net_device *dev,
 
 	wdev->chandef = *chandef;
 	wdev->preset_chandef = *chandef;
+
+	if (wdev->iftype == NL80211_IFTYPE_STATION &&
+	    !WARN_ON(!wdev->current_bss))
+		wdev->current_bss->pub.channel = chandef->chan;
+
 	nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL,
 				 NL80211_CMD_CH_SWITCH_NOTIFY, 0);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 023/114] mwifiex: prevent an array overflow

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit b4c35c17227fe437ded17ce683a6927845f8c4a4 ]

The "rate_index" is only used as an index into the phist_data->rx_rate[]
array in the mwifiex_hist_data_set() function.  That array has
MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some
debugfs information.  The "rate_index" variable comes from the network
skb->data[] and it is a u8 so it's in the 0-255 range.  We need to cap
it to prevent an array overflow.

Fixes: cbf6e05527a7 ("mwifiex: add rx histogram statistics support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/cfp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfp.c b/drivers/net/wireless/marvell/mwifiex/cfp.c
index 1ff22055e54f8..9ddaa767ea747 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfp.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfp.c
@@ -533,5 +533,8 @@ u8 mwifiex_adjust_data_rate(struct mwifiex_private *priv,
 		rate_index = (rx_rate > MWIFIEX_RATE_INDEX_OFDM0) ?
 			      rx_rate - 1 : rx_rate;
 
+	if (rate_index >= MWIFIEX_MAX_AC_RX_RATES)
+		rate_index = MWIFIEX_MAX_AC_RX_RATES - 1;
+
 	return rate_index;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 024/114] net: cw1200: fix a NULL pointer dereference

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 0ed2a005347400500a39ea7c7318f1fea57fb3ca ]

In case create_singlethread_workqueue fails, the fix free the
hardware and returns NULL to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/st/cw1200/main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/st/cw1200/main.c b/drivers/net/wireless/st/cw1200/main.c
index dc478cedbde0d..84624c812a15f 100644
--- a/drivers/net/wireless/st/cw1200/main.c
+++ b/drivers/net/wireless/st/cw1200/main.c
@@ -345,6 +345,11 @@ static struct ieee80211_hw *cw1200_init_common(const u8 *macaddr,
 	mutex_init(&priv->wsm_cmd_mux);
 	mutex_init(&priv->conf_mutex);
 	priv->workqueue = create_singlethread_workqueue("cw1200_wq");
+	if (!priv->workqueue) {
+		ieee80211_free_hw(hw);
+		return NULL;
+	}
+
 	sema_init(&priv->scan.lock, 1);
 	INIT_WORK(&priv->scan.work, cw1200_scan_work);
 	INIT_DELAYED_WORK(&priv->scan.probe_work, cw1200_probe_work);
-- 
2.20.1

[PATCH AUTOSEL 4.9 025/114] at76c50x-usb: Don't register led_trigger if usb_register_driver failed

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 09ac2694b0475f96be895848687ebcbba97eeecf ]

Syzkaller report this:

[ 1213.468581] BUG: unable to handle kernel paging request at fffffbfff83bf338
[ 1213.469530] #PF error: [normal kernel read fault]
[ 1213.469530] PGD 237fe4067 P4D 237fe4067 PUD 237e60067 PMD 1c868b067 PTE 0
[ 1213.473514] Oops: 0000 [#1] SMP KASAN PTI
[ 1213.473514] CPU: 0 PID: 6321 Comm: syz-executor.0 Tainted: G         C        5.1.0-rc3+ #8
[ 1213.473514] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1213.473514] RIP: 0010:strcmp+0x31/0xa0
[ 1213.473514] Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d
[ 1213.473514] RSP: 0018:ffff8881f2b7f950 EFLAGS: 00010246
[ 1213.473514] RAX: 1ffffffff83bf338 RBX: ffff8881ea6f7240 RCX: ffffffff825350c6
[ 1213.473514] RDX: 0000000000000000 RSI: ffffffffc1ee19c0 RDI: ffffffffc1df99c0
[ 1213.473514] RBP: ffffffffc1df99c1 R08: 0000000000000001 R09: 0000000000000004
[ 1213.473514] R10: 0000000000000000 R11: ffff8881de353f00 R12: ffff8881ee727900
[ 1213.473514] R13: dffffc0000000000 R14: 0000000000000001 R15: ffffffffc1eeaaf0
[ 1213.473514] FS:  00007fa66fa01700(0000) GS:ffff8881f7200000(0000) knlGS:0000000000000000
[ 1213.473514] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1213.473514] CR2: fffffbfff83bf338 CR3: 00000001ebb9e005 CR4: 00000000007606f0
[ 1213.473514] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1213.473514] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1213.473514] PKRU: 55555554
[ 1213.473514] Call Trace:
[ 1213.473514]  led_trigger_register+0x112/0x3f0
[ 1213.473514]  led_trigger_register_simple+0x7a/0x110
[ 1213.473514]  ? 0xffffffffc1c10000
[ 1213.473514]  at76_mod_init+0x77/0x1000 [at76c50x_usb]
[ 1213.473514]  do_one_initcall+0xbc/0x47d
[ 1213.473514]  ? perf_trace_initcall_level+0x3a0/0x3a0
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  do_init_module+0x1b5/0x547
[ 1213.473514]  load_module+0x6405/0x8c10
[ 1213.473514]  ? module_frob_arch_sections+0x20/0x20
[ 1213.473514]  ? kernel_read_file+0x1e6/0x5d0
[ 1213.473514]  ? find_held_lock+0x32/0x1c0
[ 1213.473514]  ? cap_capable+0x1ae/0x210
[ 1213.473514]  ? __do_sys_finit_module+0x162/0x190
[ 1213.473514]  __do_sys_finit_module+0x162/0x190
[ 1213.473514]  ? __ia32_sys_init_module+0xa0/0xa0
[ 1213.473514]  ? __mutex_unlock_slowpath+0xdc/0x690
[ 1213.473514]  ? wait_for_completion+0x370/0x370
[ 1213.473514]  ? vfs_write+0x204/0x4a0
[ 1213.473514]  ? do_syscall_64+0x18/0x450
[ 1213.473514]  do_syscall_64+0x9f/0x450
[ 1213.473514]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1213.473514] RIP: 0033:0x462e99
[ 1213.473514] Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
[ 1213.473514] RSP: 002b:00007fa66fa00c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 1213.473514] RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
[ 1213.473514] RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003
[ 1213.473514] RBP: 00007fa66fa00c70 R08: 0000000000000000 R09: 0000000000000000
[ 1213.473514] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fa66fa016bc
[ 1213.473514] R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

If usb_register failed, no need to call led_trigger_register_simple.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1264b951463a ("at76c50x-usb: add driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/atmel/at76c50x-usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/atmel/at76c50x-usb.c b/drivers/net/wireless/atmel/at76c50x-usb.c
index 0e180677c7fc5..09dbab464fe19 100644
--- a/drivers/net/wireless/atmel/at76c50x-usb.c
+++ b/drivers/net/wireless/atmel/at76c50x-usb.c
@@ -2583,8 +2583,8 @@ static int __init at76_mod_init(void)
 	if (result < 0)
 		printk(KERN_ERR DRIVER_NAME
 		       ": usb_register failed (status %d)\n", result);
-
-	led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
+	else
+		led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
 	return result;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 026/114] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit b2c01aab9646ed8ffb7c549afe55d5349c482425 ]

Syzkaller report this:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468
Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d
RSP: 0018:ffff8881e9d9fc00 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffffffff900367e0 RCX: ffffffff81a95952
RDX: 0000000000000006 RSI: ffffc90001405000 RDI: 0000000000000030
RBP: 0000000000000000 R08: fffffbfff1fa22ed R09: fffffbfff1fa22ed
R10: 0000000000000001 R11: fffffbfff1fa22ec R12: 0000000000000000
R13: ffffffffc1abdac0 R14: 1ffff1103d3b3f8b R15: 0000000000000000
FS:  00007fe409dc1700(0000) GS:ffff8881f1200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2d721000 CR3: 00000001e98b6005 CR4: 00000000007606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 sysfs_remove_file include/linux/sysfs.h:519 [inline]
 driver_remove_file+0x40/0x50 drivers/base/driver.c:122
 pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline]
 pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209
 ssb_modexit+0xa/0x1b [ssb]
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe409dc0c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe409dc16bc
R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff
Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6
 [last unloaded: 3c59x]
Dumping ftrace buffer:
   (ftrace buffer empty)
---[ end trace 3913cbf8011e1c05 ]---

In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed,
however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver
unconditionally, which may tigger a NULL pointer dereference issue as above.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 399500da18f7 ("ssb: pick PCMCIA host code support from b43 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ssb/bridge_pcmcia_80211.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/ssb/bridge_pcmcia_80211.c b/drivers/ssb/bridge_pcmcia_80211.c
index d70568ea02d53..2ff7d90e166ac 100644
--- a/drivers/ssb/bridge_pcmcia_80211.c
+++ b/drivers/ssb/bridge_pcmcia_80211.c
@@ -113,16 +113,21 @@ static struct pcmcia_driver ssb_host_pcmcia_driver = {
 	.resume		= ssb_host_pcmcia_resume,
 };
 
+static int pcmcia_init_failed;
+
 /*
  * These are not module init/exit functions!
  * The module_pcmcia_driver() helper cannot be used here.
  */
 int ssb_host_pcmcia_init(void)
 {
-	return pcmcia_register_driver(&ssb_host_pcmcia_driver);
+	pcmcia_init_failed = pcmcia_register_driver(&ssb_host_pcmcia_driver);
+
+	return pcmcia_init_failed;
 }
 
 void ssb_host_pcmcia_exit(void)
 {
-	pcmcia_unregister_driver(&ssb_host_pcmcia_driver);
+	if (!pcmcia_init_failed)
+		pcmcia_unregister_driver(&ssb_host_pcmcia_driver);
 }
-- 
2.20.1