[PATCH v6 0/6] Add support for Orange Pi 3

[megous@megous.com]

From: Ondrej Jirman <megous@megous.com>

This series implements support for Xunlong Orange Pi 3 board.

Unfortunately, this board needs some small driver patches, so I have
split the boards DT patch into chunks that require patches for drivers
in various subsystems.

Suggested merging plan/dependencies:

- stmmac patches are needed for ethernet support (patches 1-3)
  - these should be ready now
- HDMI support (patches 4-6)
  - should be ready

Changes in v2:
- added dt-bindings documentation for the board's compatible string
  (suggested by Clement)
- addressed checkpatch warnings and code formatting issues (on Maxime's
  suggestions)
- stmmac: dropped useless parenthesis, reworded description of the patch
  (suggested by Sergei)
- drop useles dev_info() about the selected io bias voltage
- docummented io voltage bias selection variant macros
- wifi: marked WiFi DTS patch and realted mmc1_pins as "DO NOT MERGE",
  because wifi depends on H6 RTC support that's not merged yet (suggested
  by Clement)
- added missing signed-of-bys
- changed &usb2otg dr_mode to otg, and added a note about VBUS
- improved wording of HDMI driver's DDC power supply patch

Changes in v3:
- dropped already applied patches
- changed pinctrl I/O bias selection constants to enum and renamed
- added /omit-if-no-ref/ to mmc1_pins
- made mmc1_pins default pinconf for mmc1 in H6 dtsi
- move ddc-supply to HDMI connector node, updated patch descriptions,
  changed dt-bindings docs

Changes in v4:
- fix checkpatch warnings/style issues
- use enum in struct sunxi_desc_function for io_bias_cfg_variant
- collected acked-by's
- fix compile error in drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c:156
  caused by missing conversion from has_io_bias_cfg struct member
  (I've kept the acked-by, because it's a trivial change, but feel free
  to object.) (reported by Martin A. on github)
  I did not have A80 pinctrl enabled for some reason, so I did not catch
  this sooner.
- dropped brcm firmware patch (was already applied)
- dropped the wifi dts patch (will re-send after H6 RTC gets merged,
  along with bluetooth support, in a separate series)

Changes in v5:
- dropped already applied patches (pinctrl patches, mmc1 pinconf patch)
- rename GMAC-3V3 -> GMAC-3V to match the schematic (Jagan)
- changed hdmi-connector's ddc-supply property to ddc-en-gpios
  (Rob Herring)

Changes in v6:
- added dt-bindings reviewed-by tag
- fix wording in stmmac commit (as suggested by Sergei)

Please take a look.

thank you and regards,
  Ondrej Jirman

Icenowy Zheng (2):
  net: stmmac: sun8i: add support for Allwinner H6 EMAC
  net: stmmac: sun8i: force select external PHY when no internal one

Ondrej Jirman (4):
  arm64: dts: allwinner: orange-pi-3: Enable ethernet
  dt-bindings: display: hdmi-connector: Support DDC bus enable
  drm: sun4i: Add support for enabling DDC I2C bus to sun8i_dw_hdmi glue
  arm64: dts: allwinner: orange-pi-3: Enable HDMI output

 .../display/connector/hdmi-connector.txt      |  1 +
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 70 +++++++++++++++++++
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c         | 55 ++++++++++++++-
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h         |  3 +
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 21 ++++++
 5 files changed, 147 insertions(+), 3 deletions(-)

-- 
2.21.0