From: Vladimir Oltean <olteanv@gmail.com>
To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch,
davem@davemloft.net
Cc: netdev@vger.kernel.org, Vladimir Oltean <olteanv@gmail.com>
Subject: [PATCH net-next 00/11] FDB updates for SJA1105 DSA driver
Date: Mon, 3 Jun 2019 00:11:52 +0300 [thread overview]
Message-ID: <20190602211203.17773-1-olteanv@gmail.com> (raw)
This patch series adds:
- FDB switchdev support for the second generation of switches (P/Q/R/S).
I could test/code these now that I got a board with a SJA1105Q.
- Management route support for SJA1105 P/Q/R/S. This is needed to send
PTP/STP/management frames over the CPU port.
- Logic to hide private DSA VLANs from the 'bridge fdb' commands.
The new FDB code was also tested and still works on SJA1105T.
Vladimir Oltean (11):
net: dsa: sja1105: Shim declaration of struct sja1105_dyn_cmd
net: dsa: sja1105: Fix bit offsets of index field from L2 lookup
entries
net: dsa: sja1105: Add missing L2 Forwarding Table definitions for
P/Q/R/S
net: dsa: sja1105: Plug in support for TCAM searches via the dynamic
interface
net: dsa: sja1105: Make room for P/Q/R/S FDB operations
net: dsa: sja1105: Add P/Q/R/S support for dynamic L2 lookup
operations
net: dsa: sja1105: Make dynamic_config_read return -ENOENT if not
found
net: dsa: sja1105: Add P/Q/R/S management route support via dynamic
interface
net: dsa: sja1105: Add FDB operations for P/Q/R/S series
net: dsa: sja1105: Unset port from forwarding mask unconditionally on
fdb_del
net: dsa: sja1105: Hide the dsa_8021q VLANs from the bridge fdb
command
drivers/net/dsa/sja1105/sja1105.h | 20 +-
.../net/dsa/sja1105/sja1105_dynamic_config.c | 144 +++++++++++++-
.../net/dsa/sja1105/sja1105_dynamic_config.h | 11 +-
drivers/net/dsa/sja1105/sja1105_main.c | 186 ++++++++++++++++--
drivers/net/dsa/sja1105/sja1105_spi.c | 12 ++
.../net/dsa/sja1105/sja1105_static_config.c | 18 +-
.../net/dsa/sja1105/sja1105_static_config.h | 26 +++
7 files changed, 379 insertions(+), 38 deletions(-)
--
2.17.1
next reply other threads:[~2019-06-02 21:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-02 21:11 Vladimir Oltean [this message]
2019-06-02 21:11 ` [PATCH net-next 01/11] net: dsa: sja1105: Shim declaration of struct sja1105_dyn_cmd Vladimir Oltean
2019-06-04 20:55 ` Florian Fainelli
2019-06-02 21:11 ` [PATCH net-next 02/11] net: dsa: sja1105: Fix bit offsets of index field from L2 lookup entries Vladimir Oltean
2019-06-02 21:11 ` [PATCH net-next 03/11] net: dsa: sja1105: Add missing L2 Forwarding Table definitions for P/Q/R/S Vladimir Oltean
2019-06-02 21:11 ` [PATCH net-next 04/11] net: dsa: sja1105: Plug in support for TCAM searches via the dynamic interface Vladimir Oltean
2019-06-02 21:11 ` [PATCH net-next 05/11] net: dsa: sja1105: Make room for P/Q/R/S FDB operations Vladimir Oltean
2019-06-02 21:11 ` [PATCH net-next 06/11] net: dsa: sja1105: Add P/Q/R/S support for dynamic L2 lookup operations Vladimir Oltean
2019-06-02 21:11 ` [PATCH net-next 07/11] net: dsa: sja1105: Make dynamic_config_read return -ENOENT if not found Vladimir Oltean
2019-06-04 18:51 ` [PATCH net-next 00/11] FDB updates for SJA1105 DSA driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190602211203.17773-1-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).