[PATCH net-next] net: fec: Use netdev_err() instead of pr_err()

[Fabio Estevam <festevam@gmail.com>]

netdev_err() is more appropriate for printing error messages inside
network drivers, so switch to netdev_err().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 8 ++++----
 drivers/net/ethernet/freescale/fec_ptp.c  | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 848defa33d3a..887c6cde1b88 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2452,24 +2452,24 @@ fec_enet_set_coalesce(struct net_device *ndev, struct ethtool_coalesce *ec)
 		return -EOPNOTSUPP;
 
 	if (ec->rx_max_coalesced_frames > 255) {
-		pr_err("Rx coalesced frames exceed hardware limitation\n");
+		netdev_err(ndev, "Rx coalesced frames exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
 	if (ec->tx_max_coalesced_frames > 255) {
-		pr_err("Tx coalesced frame exceed hardware limitation\n");
+		netdev_err(ndev, "Tx coalesced frame exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
 	cycle = fec_enet_us_to_itr_clock(ndev, fep->rx_time_itr);
 	if (cycle > 0xFFFF) {
-		pr_err("Rx coalesced usec exceed hardware limitation\n");
+		netdev_err(ndev, "Rx coalesced usec exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
 	cycle = fec_enet_us_to_itr_clock(ndev, fep->tx_time_itr);
 	if (cycle > 0xFFFF) {
-		pr_err("Rx coalesced usec exceed hardware limitation\n");
+		netdev_err(ndev, "Rx coalesced usec exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c
index 7e892b1cbd3d..1d7ea4604b83 100644
--- a/drivers/net/ethernet/freescale/fec_ptp.c
+++ b/drivers/net/ethernet/freescale/fec_ptp.c
@@ -617,7 +617,7 @@ void fec_ptp_init(struct platform_device *pdev, int irq_idx)
 	fep->ptp_clock = ptp_clock_register(&fep->ptp_caps, &pdev->dev);
 	if (IS_ERR(fep->ptp_clock)) {
 		fep->ptp_clock = NULL;
-		pr_err("ptp_clock_register failed\n");
+		netdev_err(ndev, "ptp_clock_register failed\n");
 	}
 
 	schedule_delayed_work(&fep->time_keep, HZ);
-- 
2.17.1