[PATCH net-next v2 1/2] net: fec_main: Use netdev_err() instead of pr_err()

[Fabio Estevam <festevam@gmail.com>]

netdev_err() is more appropriate for printing error messages inside
network drivers, so switch to netdev_err().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Split the changes from fec_main and fec_ptp in two different patches

 drivers/net/ethernet/freescale/fec_main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 848defa33d3a..4ec9733a88d5 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2452,24 +2452,24 @@ fec_enet_set_coalesce(struct net_device *ndev, struct ethtool_coalesce *ec)
 		return -EOPNOTSUPP;
 
 	if (ec->rx_max_coalesced_frames > 255) {
-		pr_err("Rx coalesced frames exceed hardware limitation\n");
+		netdev_err(ndev, "Rx coalesced frames exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
 	if (ec->tx_max_coalesced_frames > 255) {
-		pr_err("Tx coalesced frame exceed hardware limitation\n");
+		netdev_err(ndev, "Tx coalesced frame exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
 	cycle = fec_enet_us_to_itr_clock(ndev, fep->rx_time_itr);
 	if (cycle > 0xFFFF) {
-		pr_err("Rx coalesced usec exceed hardware limitation\n");
+		netdev_err(ndev, "Rx coalesced usec exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
 	cycle = fec_enet_us_to_itr_clock(ndev, fep->tx_time_itr);
 	if (cycle > 0xFFFF) {
-		pr_err("Rx coalesced usec exceed hardware limitation\n");
+		netdev_err(ndev, "Rx coalesced usec exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
-- 
2.17.1