From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.6 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE, SPF_PASS,T_DKIMWL_WL_HIGH,USER_AGENT_MUTT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 3E827C28CC5 for ; Thu, 6 Jun 2019 01:04:54 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 0D05D20874 for ; Thu, 6 Jun 2019 01:04:54 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1559783094; bh=y9Y0nBtkXWOsuZydgoYTvSFfbBFosYnVEbiVlseLM8g=; h=Date:From:To:Cc:Subject:References:In-Reply-To:List-ID:From; b=obaZnZc4LUWAxvFWs6Yqu4tYSO3SZ6nwNTqdeFb6Fw1UvtxcQak/tyySUWDxLXS4g tbO9JIb8woipUyK7Z/BUvLYdfFx931A4Tuap+jws+837/YdntJ/6EoP0irPvsvkH7p rUI1IFAj/3dbnXG3Mxoo4ukwg9dgwHPgyCiVyxgQ= Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726685AbfFFBEu (ORCPT ); Wed, 5 Jun 2019 21:04:50 -0400 Received: from mail.kernel.org ([198.145.29.99]:59368 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726581AbfFFBEu (ORCPT ); Wed, 5 Jun 2019 21:04:50 -0400 Received: from dragon (li1264-180.members.linode.com [45.79.165.180]) (using TLSv1.2 with cipher DHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id E6E4C20872; Thu, 6 Jun 2019 01:04:44 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1559783088; bh=y9Y0nBtkXWOsuZydgoYTvSFfbBFosYnVEbiVlseLM8g=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=p31hObTrXcg6hWOauZjRUqsNHUY3x8RpYwXE80eyhKsmjbwDSMshcjY5iLZO52jZh ijE5QnTtbZH0NcmOC3ih2M2UjVHhM1ZwYBXV6/Kitupdfg82xufJEGudb7gpvsx2pC 2bIt+2F0W6eqxa00vNo3ud44TnUY5Hx6tS/uce88= Date: Thu, 6 Jun 2019 09:04:31 +0800 From: Shawn Guo To: Vladimir Oltean Cc: leoyang.li@nxp.com, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org Subject: Re: [PATCH v2] ARM: dts: Introduce the NXP LS1021A-TSN board Message-ID: <20190606010429.GP29853@dragon> References: <20190529221222.19276-1-olteanv@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20190529221222.19276-1-olteanv@gmail.com> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org On Thu, May 30, 2019 at 01:12:22AM +0300, Vladimir Oltean wrote: > The LS1021A-TSN is a development board built by VVDN/Argonboards in > partnership with NXP. > > It features the LS1021A SoC and the first-generation SJA1105T Ethernet > switch for prototyping implementations of a subset of IEEE 802.1 TSN > standards. > > It has two regular Ethernet ports and four switched, TSN-capable ports. > > It also features: > - One Arduino header > - One expansion header > - Two USB 3.0 ports > - One mini PCIe slot > - One SATA interface > - Accelerometer, gyroscope, temperature sensors > > Signed-off-by: Vladimir Oltean > --- > Changes from v1: > - Applied Shawn's feedback > - Introduced QSPI flash node > > v1 patch available at: > https://patchwork.kernel.org/patch/10930451/ > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/ls1021a-tsn.dts | 288 ++++++++++++++++++++++++++++++ > 2 files changed, 289 insertions(+) > create mode 100644 arch/arm/boot/dts/ls1021a-tsn.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index dab2914fa293..a4eb4ca5e148 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -602,6 +602,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \ > dtb-$(CONFIG_SOC_LS1021A) += \ > ls1021a-moxa-uc-8410a.dtb \ > ls1021a-qds.dtb \ > + ls1021a-tsn.dtb \ > ls1021a-twr.dtb > dtb-$(CONFIG_SOC_VF610) += \ > vf500-colibri-eval-v3.dtb \ > diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts > new file mode 100644 > index 000000000000..b05774eac92e > --- /dev/null > +++ b/arch/arm/boot/dts/ls1021a-tsn.dts > @@ -0,0 +1,288 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Copyright 2016-2018 NXP Semiconductors > + * Copyright 2019 Vladimir Oltean > + */ > + > +/dts-v1/; > +#include "ls1021a.dtsi" > + > +/ { > + model = "NXP LS1021A-TSN Board"; > + > + sys_mclk: clock-mclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24576000>; > + }; > + > + reg_vdda_codec: regulator-3V3 { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_vddio_codec: regulator-2V5 { > + compatible = "regulator-fixed"; > + regulator-name = "2P5V"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > +}; > + > +&enet0 { > + tbi-handle = <&tbi0>; > + phy-handle = <&sgmii_phy2>; > + phy-mode = "sgmii"; > + status = "okay"; > +}; > + > +&enet1 { > + tbi-handle = <&tbi1>; > + phy-handle = <&sgmii_phy1>; > + phy-mode = "sgmii"; > + status = "okay"; > +}; > + > +/* RGMII delays added via PCB traces */ > +&enet2 { > + phy-mode = "rgmii"; > + status = "okay"; > + > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > +}; > + > +&dspi0 { > + bus-num = <0>; > + status = "okay"; > + > + /* ADG704BRMZ 1:4 mux/demux */ > + sja1105: ethernet-switch@1 { > + reg = <0x1>; > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "nxp,sja1105t"; > + /* 12 MHz */ > + spi-max-frequency = <12000000>; > + /* Sample data on trailing clock edge */ > + spi-cpha; > + fsl,spi-cs-sck-delay = <1000>; > + fsl,spi-sck-cs-delay = <1000>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + /* ETH5 written on chassis */ > + label = "swp5"; > + phy-handle = <&rgmii_phy6>; > + phy-mode = "rgmii-id"; > + reg = <0>; > + }; > + > + port@1 { > + /* ETH2 written on chassis */ > + label = "swp2"; > + phy-handle = <&rgmii_phy3>; > + phy-mode = "rgmii-id"; > + reg = <1>; > + }; > + > + port@2 { > + /* ETH3 written on chassis */ > + label = "swp3"; > + phy-handle = <&rgmii_phy4>; > + phy-mode = "rgmii-id"; > + reg = <2>; > + }; > + > + port@3 { > + /* ETH4 written on chassis */ > + label = "swp4"; > + phy-handle = <&rgmii_phy5>; > + phy-mode = "rgmii-id"; > + reg = <3>; > + }; > + > + port@4 { > + /* Internal port connected to eth2 */ > + ethernet = <&enet2>; > + phy-mode = "rgmii"; > + reg = <4>; > + > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + }; > + }; > +}; > + > +&mdio0 { > + /* AR8031 */ > + sgmii_phy1: ethernet-phy@1 { > + reg = <0x1>; > + }; > + > + /* AR8031 */ > + sgmii_phy2: ethernet-phy@2 { > + reg = <0x2>; > + }; > + > + /* BCM5464 quad PHY */ > + rgmii_phy3: ethernet-phy@3 { > + reg = <0x3>; > + }; > + > + rgmii_phy4: ethernet-phy@4 { > + reg = <0x4>; > + }; > + > + rgmii_phy5: ethernet-phy@5 { > + reg = <0x5>; > + }; > + > + rgmii_phy6: ethernet-phy@6 { > + reg = <0x6>; > + }; > + > + /* SGMII PCS for enet0 */ > + tbi0: tbi-phy@1f { > + reg = <0x1f>; > + device_type = "tbi-phy"; > + }; > +}; > + > +&mdio1 { > + /* SGMII PCS for enet1 */ > + tbi1: tbi-phy@1f { > + reg = <0x1f>; > + device_type = "tbi-phy"; > + }; > +}; > + > +&i2c0 { > + status = "okay"; > + > + /* 3 axis accelerometer */ > + accelerometer@1e { > + compatible = "fsl,fxls8471"; > + position = <0>; > + reg = <0x1e>; > + }; > + > + /* Audio codec (SAI2) */ > + codec@2a { audio-codec for node name. > + compatible = "fsl,sgtl5000"; > + VDDIO-supply = <®_vddio_codec>; > + VDDA-supply = <®_vdda_codec>; > + #sound-dai-cells = <0>; > + clocks = <&sys_mclk>; > + reg = <0x2a>; > + }; > + > + /* Current sensing circuit for 1V VDDCORE PMIC rail */ > + current-sensor@44 { > + compatible = "ti,ina220"; > + shunt-resistor = <1000>; > + reg = <0x44>; > + }; > + > + /* Current sensing circuit for 12V VCC rail */ > + current-sensor@45 { > + compatible = "ti,ina220"; > + shunt-resistor = <1000>; > + reg = <0x45>; > + }; > + > + /* Thermal monitor - case */ > + temperature-sensor@48 { > + compatible = "national,lm75"; > + reg = <0x48>; > + }; > + > + /* Thermal monitor - chip */ > + temperature-sensor@4c { > + compatible = "ti,tmp451"; > + reg = <0x4c>; > + }; > + > + eeprom@51 { > + compatible = "atmel,24c32"; > + reg = <0x51>; > + }; > + > + /* Unsupported devices: > + * - FXAS21002C Gyroscope at 0x20 > + * - TI ADS7924 4-channel ADC at 0x49 > + */ > +}; > + > +&qspi { > + status = "okay"; > + > + flash@0 { > + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ > + compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; > + spi-max-frequency = <20000000>; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "RCW"; > + reg = <0x0 0x40000>; > + }; > + > + partition@40000 { > + label = "U-Boot"; > + reg = <0x40000 0x300000>; > + }; > + > + partition@340000 { > + label = "U-Boot Env"; > + reg = <0x340000 0x100000>; > + }; > + }; > + }; > +}; > + > +&ifc { Please sort all these labelling nodes alphabetically. Shawn > + status = "disabled"; > +}; > + > +&esdhc { > + status = "okay"; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&lpuart0 { > + status = "okay"; > +}; > + > +&lpuart3 { > + status = "okay"; > +}; > + > +&sai2 { > + status = "okay"; > +}; > + > +&sata { > + status = "okay"; > +}; > -- > 2.17.1 >