[PATCH AUTOSEL 4.14 03/31] netfilter: nf_queue: fix reinject verdict handling

[PATCH AUTOSEL 4.14 03/31] netfilter: nf_queue: fix reinject verdict handling

[Sasha Levin]

From: Jagdish Motwani <jagdish.motwani@sophos.com>

[ Upstream commit 946c0d8e6ed43dae6527e878d0077c1e11015db0 ]

This patch fixes netfilter hook traversal when there are more than 1 hooks
returning NF_QUEUE verdict. When the first queue reinjects the packet,
'nf_reinject' starts traversing hooks with a proper hook_index. However,
if it again receives a NF_QUEUE verdict (by some other netfilter hook), it
queues the packet with a wrong hook_index. So, when the second queue
reinjects the packet, it re-executes hooks in between.

Fixes: 960632ece694 ("netfilter: convert hook list to an array")
Signed-off-by: Jagdish Motwani <jagdish.motwani@sophos.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_queue.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index f7e21953b1de..8260b1e73bbd 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -193,6 +193,7 @@ static unsigned int nf_iterate(struct sk_buff *skb,
 repeat:
 		verdict = nf_hook_entry_hookfn(hook, skb, state);
 		if (verdict != NF_ACCEPT) {
+			*index = i;
 			if (verdict != NF_REPEAT)
 				return verdict;
 			goto repeat;
-- 
2.20.1

[PATCH AUTOSEL 4.14 04/31] ipvs: Fix use-after-free in ip_vs_in

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 719c7d563c17b150877cee03a4b812a424989dfa ]

BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
Read of size 4 at addr ffff8881e9b26e2c by task sshd/5603

CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ #30
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
 dump_stack+0x71/0xab
 print_address_description+0x6a/0x270
 kasan_report+0x179/0x2c0
 ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
 ip_vs_in+0xd8/0x170 [ip_vs]
 nf_hook_slow+0x5f/0xe0
 __ip_local_out+0x1d5/0x250
 ip_local_out+0x19/0x60
 __tcp_transmit_skb+0xba1/0x14f0
 tcp_write_xmit+0x41f/0x1ed0
 ? _copy_from_iter_full+0xca/0x340
 __tcp_push_pending_frames+0x52/0x140
 tcp_sendmsg_locked+0x787/0x1600
 ? tcp_sendpage+0x60/0x60
 ? inet_sk_set_state+0xb0/0xb0
 tcp_sendmsg+0x27/0x40
 sock_sendmsg+0x6d/0x80
 sock_write_iter+0x121/0x1c0
 ? sock_sendmsg+0x80/0x80
 __vfs_write+0x23e/0x370
 vfs_write+0xe7/0x230
 ksys_write+0xa1/0x120
 ? __ia32_sys_read+0x50/0x50
 ? __audit_syscall_exit+0x3ce/0x450
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7ff6f6147c60
Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83
RSP: 002b:00007ffd772ead18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000034 RCX: 00007ff6f6147c60
RDX: 0000000000000034 RSI: 000055df30a31270 RDI: 0000000000000003
RBP: 000055df30a31270 R08: 0000000000000000 R09: 0000000000000000
R10: 00007ffd772ead70 R11: 0000000000000246 R12: 00007ffd772ead74
R13: 00007ffd772eae20 R14: 00007ffd772eae24 R15: 000055df2f12ddc0

Allocated by task 6052:
 kasan_kmalloc+0xa0/0xd0
 __kmalloc+0x10a/0x220
 ops_init+0x97/0x190
 register_pernet_operations+0x1ac/0x360
 register_pernet_subsys+0x24/0x40
 0xffffffffc0ea016d
 do_one_initcall+0x8b/0x253
 do_init_module+0xe3/0x335
 load_module+0x2fc0/0x3890
 __do_sys_finit_module+0x192/0x1c0
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 6067:
 __kasan_slab_free+0x130/0x180
 kfree+0x90/0x1a0
 ops_free_list.part.7+0xa6/0xc0
 unregister_pernet_operations+0x18b/0x1f0
 unregister_pernet_subsys+0x1d/0x30
 ip_vs_cleanup+0x1d/0xd2f [ip_vs]
 __x64_sys_delete_module+0x20c/0x300
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 2092 bytes inside of 4096-byte region [ffff8881e9b26600, ffff8881e9b27600)
The buggy address belongs to the page:
page:ffffea0007a6c800 count:1 mapcount:0 mapping:ffff888107c0e600 index:0x0 compound_mapcount: 0
flags: 0x17ffffc0008100(slab|head)
raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600
raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

while unregistering ipvs module, ops_free_list calls
__ip_vs_cleanup, then nf_unregister_net_hooks be called to
do remove nf hook entries. It need a RCU period to finish,
however net->ipvs is set to NULL immediately, which will
trigger NULL pointer dereference when a packet is hooked
and handled by ip_vs_in where net->ipvs is dereferenced.

Another scene is ops_free_list call ops_free to free the
net_generic directly while __ip_vs_cleanup finished, then
calling ip_vs_in will triggers use-after-free.

This patch moves nf_unregister_net_hooks from __ip_vs_cleanup()
to __ip_vs_dev_cleanup(),  where rcu_barrier() is called by
unregister_pernet_device -> unregister_pernet_operations,
that will do the needed grace period.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: efe41606184e ("ipvs: convert to use pernet nf_hook api")
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index d1c0378144f3..ee97ce176b9a 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -2268,7 +2268,6 @@ static void __net_exit __ip_vs_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 
-	nf_unregister_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
 	ip_vs_service_net_cleanup(ipvs);	/* ip_vs_flush() with locks */
 	ip_vs_conn_net_cleanup(ipvs);
 	ip_vs_app_net_cleanup(ipvs);
@@ -2283,6 +2282,7 @@ static void __net_exit __ip_vs_dev_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 	EnterFunction(2);
+	nf_unregister_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
 	ipvs->enable = 0;	/* Disable packet reception */
 	smp_wmb();
 	ip_vs_sync_net_cleanup(ipvs);
-- 
2.20.1

[PATCH AUTOSEL 4.14 08/31] mISDN: make sure device name is NUL terminated

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit ccfb62f27beb295103e9392462b20a6ed807d0ea ]

The user can change the device_name with the IMSETDEVNAME ioctl, but we
need to ensure that the user's name is NUL terminated.  Otherwise it
could result in a buffer overflow when we copy the name back to the user
with IMGETDEVINFO ioctl.

I also changed two strcpy() calls which handle the name to strscpy().
Hopefully, there aren't any other ways to create a too long name, but
it's nice to do this as a kernel hardening measure.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/socket.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index 65cb4aac8dce..477e07036add 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -394,7 +394,7 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -678,7 +678,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -692,6 +692,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			err = -EFAULT;
 			break;
 		}
+		dn.name[sizeof(dn.name) - 1] = '\0';
 		dev = get_mdevice(dn.id);
 		if (dev)
 			err = device_rename(&dev->dev, dn.name);
-- 
2.20.1

[PATCH AUTOSEL 4.14 14/31] net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 3e66b7cc50ef921121babc91487e1fb98af1ba6e ]

Building with Clang reports the redundant use of MODULE_DEVICE_TABLE():

drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table'
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:90:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:85:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^

This drops the one further from the table definition to match the common
use of MODULE_DEVICE_TABLE().

Fixes: 07563c711fbc ("EISA bus MODALIAS attributes support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/dec/tulip/de4x5.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index 0affee9c8aa2..0b1e7a96ff49 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -2108,7 +2108,6 @@ static struct eisa_driver de4x5_eisa_driver = {
 		.remove  = de4x5_eisa_remove,
         }
 };
-MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
 #endif
 
 #ifdef CONFIG_PCI
-- 
2.20.1

[PATCH AUTOSEL 4.14 16/31] net: aquantia: fix LRO with FCS error

[Sasha Levin]

From: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>

[ Upstream commit eaeb3b7494ba9159323814a8ce8af06a9277d99b ]

Driver stops producing skbs on ring if a packet with FCS error
was coalesced into LRO session. Ring gets hang forever.

Thats a logical error in driver processing descriptors:
When rx_stat indicates MAC Error, next pointer and eop flags
are not filled. This confuses driver so it waits for descriptor 0
to be filled by HW.

Solution is fill next pointer and eop flag even for packets with FCS error.

Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../aquantia/atlantic/hw_atl/hw_atl_b0.c      | 61 ++++++++++---------
 1 file changed, 32 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index f4b3554b0b67..236325f48ec9 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -683,38 +683,41 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self,
 		if (is_err || rxd_wb->type & 0x1000U) {
 			/* status error or DMA error */
 			buff->is_error = 1U;
-		} else {
-			if (self->aq_nic_cfg->is_rss) {
-				/* last 4 byte */
-				u16 rss_type = rxd_wb->type & 0xFU;
-
-				if (rss_type && rss_type < 0x8U) {
-					buff->is_hash_l4 = (rss_type == 0x4 ||
-					rss_type == 0x5);
-					buff->rss_hash = rxd_wb->rss_hash;
-				}
+		}
+		if (self->aq_nic_cfg->is_rss) {
+			/* last 4 byte */
+			u16 rss_type = rxd_wb->type & 0xFU;
+
+			if (rss_type && rss_type < 0x8U) {
+				buff->is_hash_l4 = (rss_type == 0x4 ||
+				rss_type == 0x5);
+				buff->rss_hash = rxd_wb->rss_hash;
 			}
+		}
 
-			if (HW_ATL_B0_RXD_WB_STAT2_EOP & rxd_wb->status) {
-				buff->len = rxd_wb->pkt_len %
-					AQ_CFG_RX_FRAME_MAX;
-				buff->len = buff->len ?
-					buff->len : AQ_CFG_RX_FRAME_MAX;
-				buff->next = 0U;
-				buff->is_eop = 1U;
+		if (HW_ATL_B0_RXD_WB_STAT2_EOP & rxd_wb->status) {
+			buff->len = rxd_wb->pkt_len %
+				AQ_CFG_RX_FRAME_MAX;
+			buff->len = buff->len ?
+				buff->len : AQ_CFG_RX_FRAME_MAX;
+			buff->next = 0U;
+			buff->is_eop = 1U;
+		} else {
+			buff->len =
+				rxd_wb->pkt_len > AQ_CFG_RX_FRAME_MAX ?
+				AQ_CFG_RX_FRAME_MAX : rxd_wb->pkt_len;
+
+			if (HW_ATL_B0_RXD_WB_STAT2_RSCCNT &
+				rxd_wb->status) {
+				/* LRO */
+				buff->next = rxd_wb->next_desc_ptr;
+				++ring->stats.rx.lro_packets;
 			} else {
-				if (HW_ATL_B0_RXD_WB_STAT2_RSCCNT &
-					rxd_wb->status) {
-					/* LRO */
-					buff->next = rxd_wb->next_desc_ptr;
-					++ring->stats.rx.lro_packets;
-				} else {
-					/* jumbo */
-					buff->next =
-						aq_ring_next_dx(ring,
-								ring->hw_head);
-					++ring->stats.rx.jumbo_packets;
-				}
+				/* jumbo */
+				buff->next =
+					aq_ring_next_dx(ring,
+							ring->hw_head);
+				++ring->stats.rx.jumbo_packets;
 			}
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 25/31] net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit 315ca92dd863fecbffc0bb52ae0ac11e0398726a ]

The sh_eth_close() resets the MAC and then calls phy_stop()
so that mdio read access result is incorrect without any error
according to kernel trace like below:

ifconfig-216   [003] .n..   109.133124: mdio_access: ee700000.ethernet-ffffffff read  phy:0x01 reg:0x00 val:0xffff

According to the hardware manual, the RMII mode should be set to 1
before operation the Ethernet MAC. However, the previous code was not
set to 1 after the driver issued the soft_reset in sh_eth_dev_exit()
so that the mdio read access result seemed incorrect. To fix the issue,
this patch adds a condition and set the RMII mode register in
sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs.

Note that when I have tried to move the sh_eth_dev_exit() calling
after phy_stop() on sh_eth_close(), but it gets worse (kernel panic
happened and it seems that a register is accessed while the clock is
off).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/renesas/sh_eth.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index abfb9faadbc4..9b1906a65e11 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1458,6 +1458,10 @@ static void sh_eth_dev_exit(struct net_device *ndev)
 	sh_eth_get_stats(ndev);
 	sh_eth_reset(ndev);
 
+	/* Set the RMII mode again if required */
+	if (mdp->cd->rmiimode)
+		sh_eth_write(ndev, 0x1, RMIIMODE);
+
 	/* Set MAC address again */
 	update_mac_address(ndev);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 26/31] net: phy: dp83867: Set up RGMII TX delay

[Sasha Levin]

From: Max Uvarov <muvarov@gmail.com>

[ Upstream commit 2b892649254fec01678c64f16427622b41fa27f4 ]

PHY_INTERFACE_MODE_RGMII_RXID is less then TXID
so code to set tx delay is never called.

Fixes: 2a10154abcb75 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83867.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index c1ab976cc800..12b09e6e03ba 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -249,10 +249,8 @@ static int dp83867_config_init(struct phy_device *phydev)
 		ret = phy_write(phydev, MII_DP83867_PHYCTRL, val);
 		if (ret)
 			return ret;
-	}
 
-	if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
-	    (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
+		/* Set up RGMII delays */
 		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL);
 
 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
-- 
2.20.1

[PATCH AUTOSEL 4.14 31/31] mlxsw: spectrum: Prevent force of 56G

[Sasha Levin]

From: Amit Cohen <amitc@mellanox.com>

[ Upstream commit 275e928f19117d22f6d26dee94548baf4041b773 ]

Force of 56G is not supported by hardware in Ethernet devices. This
configuration fails with a bad parameter error from firmware.

Add check of this case. Instead of trying to set 56G with autoneg off,
return a meaningful error.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index ab09f9e43c79..5c74787f903b 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2505,6 +2505,10 @@ mlxsw_sp_port_set_link_ksettings(struct net_device *dev,
 	mlxsw_reg_ptys_eth_unpack(ptys_pl, &eth_proto_cap, NULL, NULL);
 
 	autoneg = cmd->base.autoneg == AUTONEG_ENABLE;
+	if (!autoneg && cmd->base.speed == SPEED_56000) {
+		netdev_err(dev, "56G not supported with autoneg off\n");
+		return -EINVAL;
+	}
 	eth_proto_new = autoneg ?
 		mlxsw_sp_to_ptys_advert_link(cmd) :
 		mlxsw_sp_to_ptys_speed(cmd->base.speed);
-- 
2.20.1