netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch,
	davem@davemloft.net, richardcochran@gmail.com,
	john.stultz@linaro.org, tglx@linutronix.de, sboyd@kernel.org
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	Vladimir Oltean <olteanv@gmail.com>
Subject: [PATCH v4 net-next 07/17] net: dsa: sja1105: Export symbols for upcoming PTP driver
Date: Sat,  8 Jun 2019 15:04:33 +0300	[thread overview]
Message-ID: <20190608120443.21889-8-olteanv@gmail.com> (raw)
In-Reply-To: <20190608120443.21889-1-olteanv@gmail.com>

These are needed for the situation where the switch driver and the PTP
driver are both built as modules.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
Changes in v4:

Patch is new. Fixes build errors reported by David Miller.

 drivers/net/dsa/sja1105/sja1105_spi.c           | 2 ++
 drivers/net/dsa/sja1105/sja1105_static_config.c | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c
index b1344ed1697f..422894068c8b 100644
--- a/drivers/net/dsa/sja1105/sja1105_spi.c
+++ b/drivers/net/dsa/sja1105/sja1105_spi.c
@@ -100,6 +100,7 @@ int sja1105_spi_send_packed_buf(const struct sja1105_private *priv,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(sja1105_spi_send_packed_buf);
 
 /* If @rw is:
  * - SPI_WRITE: creates and sends an SPI write message at absolute
@@ -135,6 +136,7 @@ int sja1105_spi_send_int(const struct sja1105_private *priv,
 
 	return rc;
 }
+EXPORT_SYMBOL_GPL(sja1105_spi_send_int);
 
 /* Should be used if a @packed_buf larger than SJA1105_SIZE_SPI_MSG_MAXLEN
  * must be sent/received. Splitting the buffer into chunks and assembling
diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c
index 6d65a7b09395..e2f86b332b09 100644
--- a/drivers/net/dsa/sja1105/sja1105_static_config.c
+++ b/drivers/net/dsa/sja1105/sja1105_static_config.c
@@ -35,6 +35,7 @@ void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len)
 	}
 	dump_stack();
 }
+EXPORT_SYMBOL_GPL(sja1105_pack);
 
 void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len)
 {
@@ -52,6 +53,7 @@ void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len)
 		       start, end);
 	dump_stack();
 }
+EXPORT_SYMBOL_GPL(sja1105_unpack);
 
 void sja1105_packing(void *buf, u64 *val, int start, int end,
 		     size_t len, enum packing_op op)
@@ -74,6 +76,7 @@ void sja1105_packing(void *buf, u64 *val, int start, int end,
 	}
 	dump_stack();
 }
+EXPORT_SYMBOL_GPL(sja1105_packing);
 
 /* Little-endian Ethernet CRC32 of data packed as big-endian u32 words */
 u32 sja1105_crc32(const void *buf, size_t len)
-- 
2.17.1


  parent reply	other threads:[~2019-06-08 12:05 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-08 12:04 [PATCH v4 net-next 00/17] PTP support for the SJA1105 DSA driver Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 01/17] net: dsa: Keep a pointer to the skb clone for TX timestamping Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 02/17] net: dsa: Add teardown callback for drivers Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 03/17] net: dsa: tag_8021q: Create helper function for removing VLAN header Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 04/17] net: dsa: sja1105: Move sja1105_change_tpid into sja1105_vlan_filtering Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 05/17] net: dsa: sja1105: Reverse TPID and TPID2 Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 06/17] net: dsa: sja1105: Limit use of incl_srcpt to bridge+vlan mode Vladimir Oltean
2019-06-08 12:04 ` Vladimir Oltean [this message]
2019-06-08 12:04 ` [PATCH v4 net-next 08/17] net: dsa: sja1105: Add support for the PTP clock Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 09/17] net: dsa: sja1105: Add logic for TX timestamping Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 10/17] net: dsa: sja1105: Build a minimal understanding of meta frames Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 11/17] net: dsa: sja1105: Add support for the AVB Parameters Table Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 12/17] net: dsa: sja1105: Make sja1105_is_link_local not match meta frames Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 13/17] net: dsa: sja1105: Receive and decode " Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 14/17] net: dsa: sja1105: Add a global sja1105_tagger_data structure Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 15/17] net: dsa: sja1105: Increase priority of CPU-trapped frames Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 16/17] net: dsa: sja1105: Add a state machine for RX timestamping Vladimir Oltean
2019-06-08 12:04 ` [PATCH v4 net-next 17/17] net: dsa: sja1105: Expose PTP timestamping ioctls to userspace Vladimir Oltean
2019-06-08 22:21 ` [PATCH v4 net-next 00/17] PTP support for the SJA1105 DSA driver David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190608120443.21889-8-olteanv@gmail.com \
    --to=olteanv@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=john.stultz@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    --cc=sboyd@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).