[PATCH v3 net-next] net: fec_main: Use dev_err() instead of pr_err()

[PATCH v3 net-next] net: fec_main: Use dev_err() instead of pr_err()

[Fabio Estevam]

dev_err() is more appropriate for printing error messages inside
drivers, so switch to dev_err().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v2:
- Use dev_err() instead of netdev_err() - Andy

 drivers/net/ethernet/freescale/fec_main.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 2ee72452ca76..9d459ccf251d 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2446,30 +2446,31 @@ static int
 fec_enet_set_coalesce(struct net_device *ndev, struct ethtool_coalesce *ec)
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
+	struct device *dev = &fep->pdev->dev;
 	unsigned int cycle;
 
 	if (!(fep->quirks & FEC_QUIRK_HAS_COALESCE))
 		return -EOPNOTSUPP;
 
 	if (ec->rx_max_coalesced_frames > 255) {
-		pr_err("Rx coalesced frames exceed hardware limitation\n");
+		dev_err(dev, "Rx coalesced frames exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
 	if (ec->tx_max_coalesced_frames > 255) {
-		pr_err("Tx coalesced frame exceed hardware limitation\n");
+		dev_err(dev, "Tx coalesced frame exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
 	cycle = fec_enet_us_to_itr_clock(ndev, fep->rx_time_itr);
 	if (cycle > 0xFFFF) {
-		pr_err("Rx coalesced usec exceed hardware limitation\n");
+		dev_err(dev, "Rx coalesced usec exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
 	cycle = fec_enet_us_to_itr_clock(ndev, fep->tx_time_itr);
 	if (cycle > 0xFFFF) {
-		pr_err("Rx coalesced usec exceed hardware limitation\n");
+		dev_err(dev, "Rx coalesced usec exceed hardware limitation\n");
 		return -EINVAL;
 	}
 
-- 
2.17.1

Re: [PATCH v3 net-next] net: fec_main: Use dev_err() instead of pr_err()

[David Miller]

From: Fabio Estevam <festevam@gmail.com>
Date: Fri,  7 Jun 2019 09:14:18 -0300

> dev_err() is more appropriate for printing error messages inside
> drivers, so switch to dev_err().
> 
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> Changes since v2:
> - Use dev_err() instead of netdev_err() - Andy

Applied.