Netdev List
 help / color / mirror / Atom feed
From: Simon Wunderlich <sw@simonwunderlich.de>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, b.a.t.m.a.n@lists.open-mesh.org,
	Sven Eckelmann <sven@narfation.org>,
	Simon Wunderlich <sw@simonwunderlich.de>
Subject: [PATCH 2/2] batman-adv: Fix duplicated OGMs on NETDEV_UP
Date: Thu, 27 Jun 2019 12:31:19 +0200	[thread overview]
Message-ID: <20190627103119.6969-3-sw@simonwunderlich.de> (raw)
In-Reply-To: <20190627103119.6969-1-sw@simonwunderlich.de>

From: Sven Eckelmann <sven@narfation.org>

The state of slave interfaces are handled differently depending on whether
the interface is up or not. All active interfaces (IFF_UP) will transmit
OGMs. But for B.A.T.M.A.N. IV, also non-active interfaces are scheduling
(low TTL) OGMs on active interfaces. The code which setups and schedules
the OGMs must therefore already be called when the interfaces gets added as
slave interface and the transmit function must then check whether it has to
send out the OGM or not on the specific slave interface.

But the commit f0d97253fb5f ("batman-adv: remove ogm_emit and ogm_schedule
API calls") moved the setup code from the enable function to the activate
function. The latter is called either when the added slave was already up
when batadv_hardif_enable_interface processed the new interface or when a
NETDEV_UP event was received for this slave interfac. As result, each
NETDEV_UP would schedule a new OGM worker for the interface and thus OGMs
would be send a lot more than expected.

Fixes: f0d97253fb5f ("batman-adv: remove ogm_emit and ogm_schedule API calls")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Tested-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 net/batman-adv/bat_iv_ogm.c     | 4 ++--
 net/batman-adv/hard-interface.c | 3 +++
 net/batman-adv/types.h          | 3 +++
 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c
index bd4138ddf7e0..240ed70912d6 100644
--- a/net/batman-adv/bat_iv_ogm.c
+++ b/net/batman-adv/bat_iv_ogm.c
@@ -2337,7 +2337,7 @@ batadv_iv_ogm_neigh_is_sob(struct batadv_neigh_node *neigh1,
 	return ret;
 }
 
-static void batadv_iv_iface_activate(struct batadv_hard_iface *hard_iface)
+static void batadv_iv_iface_enabled(struct batadv_hard_iface *hard_iface)
 {
 	/* begin scheduling originator messages on that interface */
 	batadv_iv_ogm_schedule(hard_iface);
@@ -2683,8 +2683,8 @@ static void batadv_iv_gw_dump(struct sk_buff *msg, struct netlink_callback *cb,
 static struct batadv_algo_ops batadv_batman_iv __read_mostly = {
 	.name = "BATMAN_IV",
 	.iface = {
-		.activate = batadv_iv_iface_activate,
 		.enable = batadv_iv_ogm_iface_enable,
+		.enabled = batadv_iv_iface_enabled,
 		.disable = batadv_iv_ogm_iface_disable,
 		.update_mac = batadv_iv_ogm_iface_update_mac,
 		.primary_set = batadv_iv_ogm_primary_iface_set,
diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c
index 79d1731b8306..3719cfd026f0 100644
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -795,6 +795,9 @@ int batadv_hardif_enable_interface(struct batadv_hard_iface *hard_iface,
 
 	batadv_hardif_recalc_extra_skbroom(soft_iface);
 
+	if (bat_priv->algo_ops->iface.enabled)
+		bat_priv->algo_ops->iface.enabled(hard_iface);
+
 out:
 	return 0;
 
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 74b644738a36..e0b25104cbfa 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -2129,6 +2129,9 @@ struct batadv_algo_iface_ops {
 	/** @enable: init routing info when hard-interface is enabled */
 	int (*enable)(struct batadv_hard_iface *hard_iface);
 
+	/** @enabled: notification when hard-interface was enabled (optional) */
+	void (*enabled)(struct batadv_hard_iface *hard_iface);
+
 	/** @disable: de-init routing info when hard-interface is disabled */
 	void (*disable)(struct batadv_hard_iface *hard_iface);
 
-- 
2.11.0


  parent reply	other threads:[~2019-06-27 10:40 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-27 10:31 [PATCH 0/2] pull request for net: batman-adv 2019-06-27 Simon Wunderlich
2019-06-27 10:31 ` [PATCH 1/2] batman-adv: fix for leaked TVLV handler Simon Wunderlich
2019-06-27 10:31 ` Simon Wunderlich [this message]
2019-06-28 16:45 ` [PATCH 0/2] pull request for net: batman-adv 2019-06-27 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190627103119.6969-3-sw@simonwunderlich.de \
    --to=sw@simonwunderlich.de \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    --cc=sven@narfation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox