From: Jiri Pirko <jiri@resnulli.us>
To: Tariq Toukan <tariqt@mellanox.com>
Cc: "David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, Eran Ben Elisha <eranbe@mellanox.com>,
ayal@mellanox.com, jiri@mellanox.com,
Saeed Mahameed <saeedm@mellanox.com>,
moshe@mellanox.com
Subject: Re: [PATCH net-next 11/16] net/mlx5e: Add support to rx reporter diagnose
Date: Mon, 8 Jul 2019 16:22:03 +0200 [thread overview]
Message-ID: <20190708142203.GJ2201@nanopsycho> (raw)
In-Reply-To: <1562500388-16847-12-git-send-email-tariqt@mellanox.com>
Sun, Jul 07, 2019 at 01:53:03PM CEST, tariqt@mellanox.com wrote:
>From: Aya Levin <ayal@mellanox.com>
>
>Add rx reporter, which supports diagnose call-back. Diagnostics output
>include: information common to all RQs: RQ type, RQ size, RQ stride
>size, CQ size and CQ stride size. In addition advertise information per
>RQ and its related icosq and attached CQ.
>
>$ devlink health diagnose pci/0000:00:0b.0 reporter rx
>Common config:
> RQ: type: 2 stride size: 2048 size: 8
> CQ: stride size: 64 size: 1024
> RQs:
> channel ix: 0 rqn: 4284 HW state: 1 SW state: 3 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1032 HW status: 0
> channel ix: 1 rqn: 4289 HW state: 1 SW state: 3 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1036 HW status: 0
> channel ix: 2 rqn: 4294 HW state: 1 SW state: 3 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1040 HW status: 0
> channel ix: 3 rqn: 4299 HW state: 1 SW state: 3 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1044 HW status: 0
>
>$ devlink health diagnose pci/0000:00:0b.0 reporter rx -jp
>{
> "Common config": [
> "RQ": {
> "type": 2,
> "stride size": 2048,
> "size": 8
> },
> "CQ": {
> "stride size": 64,
> "size": 1024
> } ],
> "RQs": [ {
> "channel ix": 0,
> "rqn": 4284,
> "HW state": 1,
> "SW state": 3,
> "posted WQEs": 7,
> "cc": 7,
> "ICOSQ HW state": 1,
> "CQ": {
> "cqn": 1032,
> "HW status": 0
> }
> },{
> "channel ix": 1,
> "rqn": 4289,
> "HW state": 1,
> "SW state": 3,
> "posted WQEs": 7,
> "cc": 7,
> "ICOSQ HW state": 1,
> "CQ": {
> "cqn": 1036,
> "HW status": 0
> }
> },{
> "channel ix": 2,
> "rqn": 4294,
> "HW state": 1,
> "SW state": 3,
> "posted WQEs": 7,
> "cc": 7,
> "ICOSQ HW state": 1,
> "CQ": {
> "cqn": 1040,
> "HW status": 0
> }
> },{
> "channel ix": 3,
> "rqn": 4299,
> "HW state": 1,
> "SW state": 3,
> "posted WQEs": 7,
> "cc": 7,
> "ICOSQ HW state": 1,
> "CQ": {
> "cqn": 1044,
> "HW status": 0
> }
> } ]
>}
>
>Signed-off-by: Aya Levin <ayal@mellanox.com>
>Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
>---
> drivers/net/ethernet/mellanox/mlx5/core/Makefile | 4 +-
> drivers/net/ethernet/mellanox/mlx5/core/en.h | 21 +++
> .../net/ethernet/mellanox/mlx5/core/en/health.c | 31 ++++
> .../net/ethernet/mellanox/mlx5/core/en/health.h | 7 +
> .../ethernet/mellanox/mlx5/core/en/reporter_rx.c | 194 +++++++++++++++++++++
> drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 29 +--
> 6 files changed, 258 insertions(+), 28 deletions(-)
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c
>
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
>index 23d566a45a30..a3b9659649a8 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
>@@ -24,8 +24,8 @@ mlx5_core-y := main.o cmd.o debugfs.o fw.o eq.o uar.o pagealloc.o \
> mlx5_core-$(CONFIG_MLX5_CORE_EN) += en_main.o en_common.o en_fs.o en_ethtool.o \
> en_tx.o en_rx.o en_dim.o en_txrx.o en/xdp.o en_stats.o \
> en_selftest.o en/port.o en/monitor_stats.o en/health.o \
>- en/reporter_tx.o en/params.o en/xsk/umem.o en/xsk/setup.o \
>- en/xsk/rx.o en/xsk/tx.o
>+ en/reporter_tx.o en/reporter_rx.o en/params.o en/xsk/umem.o \
>+ en/xsk/setup.o en/xsk/rx.o en/xsk/tx.o
>
> #
> # Netdev extra
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
>index 263558875f20..f7c5cf7a7064 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
>@@ -848,6 +848,7 @@ struct mlx5e_priv {
> struct mlx5e_tls *tls;
> #endif
> struct devlink_health_reporter *tx_reporter;
>+ struct devlink_health_reporter *rx_reporter;
> struct mlx5e_xsk xsk;
> };
>
>@@ -888,6 +889,26 @@ netdev_tx_t mlx5e_sq_xmit(struct mlx5e_txqsq *sq, struct sk_buff *skb,
> int mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget);
> void mlx5e_free_txqsq_descs(struct mlx5e_txqsq *sq);
>
>+static inline u32 mlx5e_rqwq_get_size(struct mlx5e_rq *rq)
>+{
>+ switch (rq->wq_type) {
>+ case MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ:
>+ return mlx5_wq_ll_get_size(&rq->mpwqe.wq);
>+ default:
>+ return mlx5_wq_cyc_get_size(&rq->wqe.wq);
>+ }
>+}
>+
>+static inline u32 mlx5e_rqwq_get_cur_sz(struct mlx5e_rq *rq)
>+{
>+ switch (rq->wq_type) {
>+ case MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ:
>+ return rq->mpwqe.wq.cur_sz;
>+ default:
>+ return rq->wqe.wq.cur_sz;
>+ }
>+}
>+
> bool mlx5e_check_fragmented_striding_rq_cap(struct mlx5_core_dev *mdev);
> bool mlx5e_striding_rq_possible(struct mlx5_core_dev *mdev,
> struct mlx5e_params *params);
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/health.c b/drivers/net/ethernet/mellanox/mlx5/core/en/health.c
>index a266717d41e5..a0579de8e2e0 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/en/health.c
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/health.c
>@@ -96,6 +96,37 @@ int mlx5e_reporter_cq_common_diagnose(struct mlx5e_cq *cq, struct devlink_fmsg *
> return 0;
> }
>
>+int mlx5e_health_create_reporters(struct mlx5e_priv *priv)
>+{
>+ int err;
>+
>+ err = mlx5e_reporter_tx_create(priv);
>+ if (err)
>+ return err;
>+
>+ err = mlx5e_reporter_rx_create(priv);
>+ if (err)
>+ return err;
>+
>+ return 0;
>+}
>+
>+void mlx5e_health_destroy_reporters(struct mlx5e_priv *priv)
>+{
>+ mlx5e_reporter_rx_destroy(priv);
>+ mlx5e_reporter_tx_destroy(priv);
>+}
>+
>+void mlx5e_health_channels_update(struct mlx5e_priv *priv)
>+{
>+ if (priv->tx_reporter)
>+ devlink_health_reporter_state_update(priv->tx_reporter,
>+ DEVLINK_HEALTH_REPORTER_STATE_HEALTHY);
>+ if (priv->rx_reporter)
>+ devlink_health_reporter_state_update(priv->rx_reporter,
>+ DEVLINK_HEALTH_REPORTER_STATE_HEALTHY);
>+}
Could you do this introduction of mlx5e_health_create_reporters(),
mlx5e_health_destroy_reporters(), and mlx5e_health_channels_update()
in a separate patch before this one?
>+
> int mlx5e_health_sq_to_ready(struct mlx5e_channel *channel, u32 sqn)
> {
> struct mlx5_core_dev *mdev = channel->mdev;
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/health.h b/drivers/net/ethernet/mellanox/mlx5/core/en/health.h
>index b0c8bda3d25f..7829ea229914 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/en/health.h
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/health.h
>@@ -16,6 +16,9 @@
> int mlx5e_reporter_named_obj_nest_start(struct devlink_fmsg *fmsg, char *name);
> int mlx5e_reporter_named_obj_nest_end(struct devlink_fmsg *fmsg);
>
>+int mlx5e_reporter_rx_create(struct mlx5e_priv *priv);
>+void mlx5e_reporter_rx_destroy(struct mlx5e_priv *priv);
>+
> #define MLX5E_REPORTER_PER_Q_MAX_LEN 256
>
> struct mlx5e_err_ctx {
>@@ -29,5 +32,9 @@ struct mlx5e_err_ctx {
> int mlx5e_health_report(struct mlx5e_priv *priv,
> struct devlink_health_reporter *reporter, char *err_str,
> struct mlx5e_err_ctx *err_ctx);
>+int mlx5e_health_create_reporters(struct mlx5e_priv *priv);
>+void mlx5e_health_destroy_reporters(struct mlx5e_priv *priv);
>+void mlx5e_health_channels_update(struct mlx5e_priv *priv);
>+
>
> #endif
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c
>new file mode 100644
>index 000000000000..b24bdff473b0
>--- /dev/null
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c
>@@ -0,0 +1,194 @@
>+// SPDX-License-Identifier: GPL-2.0
>+// Copyright (c) 2019 Mellanox Technologies.
>+
>+#include "health.h"
>+#include "params.h"
>+
>+static int mlx5e_query_rq_state(struct mlx5_core_dev *dev, u32 rqn, u8 *state)
>+{
>+ int outlen = MLX5_ST_SZ_BYTES(query_rq_out);
>+ void *out;
>+ void *rqc;
>+ int err;
>+
>+ out = kvzalloc(outlen, GFP_KERNEL);
>+ if (!out)
>+ return -ENOMEM;
>+
>+ err = mlx5_core_query_rq(dev, rqn, out);
>+ if (err)
>+ goto out;
>+
>+ rqc = MLX5_ADDR_OF(query_rq_out, out, rq_context);
>+ *state = MLX5_GET(rqc, rqc, state);
>+
>+out:
>+ kvfree(out);
>+ return err;
>+}
>+
>+static int mlx5e_rx_reporter_build_diagnose_output(struct mlx5e_rq *rq,
>+ struct devlink_fmsg *fmsg)
>+{
>+ struct mlx5e_priv *priv = rq->channel->priv;
>+ struct mlx5e_params *params = &priv->channels.params;
>+ struct mlx5e_icosq *icosq = &rq->channel->icosq;
>+ u8 icosq_hw_state;
>+ int wqes_sz;
>+ u8 hw_state;
>+ u16 wq_head;
>+ int err;
>+
>+ err = mlx5e_query_rq_state(priv->mdev, rq->rqn, &hw_state);
>+ if (err)
>+ return err;
>+
>+ err = mlx5_core_query_sq_state(priv->mdev, icosq->sqn, &icosq_hw_state);
>+ if (err)
>+ return err;
>+
>+ wqes_sz = mlx5e_rqwq_get_cur_sz(rq);
>+ wq_head = params->rq_wq_type == MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ ?
>+ rq->mpwqe.wq.head : mlx5_wq_cyc_get_head(&rq->wqe.wq);
>+
>+ err = devlink_fmsg_obj_nest_start(fmsg);
>+ if (err)
>+ return err;
>+
>+ err = devlink_fmsg_u32_pair_put(fmsg, "channel ix", rq->channel->ix);
>+ if (err)
>+ return err;
>+
>+ err = devlink_fmsg_u32_pair_put(fmsg, "rqn", rq->rqn);
>+ if (err)
>+ return err;
>+
>+ err = devlink_fmsg_u8_pair_put(fmsg, "HW state", hw_state);
>+ if (err)
>+ return err;
>+
>+ err = devlink_fmsg_u8_pair_put(fmsg, "SW state", rq->state);
>+ if (err)
>+ return err;
>+
>+ err = devlink_fmsg_u32_pair_put(fmsg, "posted WQEs", wqes_sz);
>+ if (err)
>+ return err;
>+
>+ err = devlink_fmsg_u32_pair_put(fmsg, "cc", wq_head);
>+ if (err)
>+ return err;
>+
>+ err = devlink_fmsg_u8_pair_put(fmsg, "ICOSQ HW state", icosq_hw_state);
>+ if (err)
>+ return err;
>+
>+ err = mlx5e_reporter_cq_diagnose(&rq->cq, fmsg);
>+ if (err)
>+ return err;
>+
>+ err = devlink_fmsg_obj_nest_end(fmsg);
>+ if (err)
>+ return err;
>+
>+ return 0;
>+}
>+
>+static int mlx5e_rx_reporter_diagnose(struct devlink_health_reporter *reporter,
>+ struct devlink_fmsg *fmsg)
>+{
>+ struct mlx5e_priv *priv = devlink_health_reporter_priv(reporter);
>+ struct mlx5e_params *params = &priv->channels.params;
>+ struct mlx5e_rq *generic_rq;
>+ u32 rq_stride, rq_sz;
>+ int i, err = 0;
>+
>+ mutex_lock(&priv->state_lock);
>+
>+ if (!test_bit(MLX5E_STATE_OPENED, &priv->state))
>+ goto unlock;
>+
>+ generic_rq = &priv->channels.c[0]->rq;
>+ rq_sz = mlx5e_rqwq_get_size(generic_rq);
>+ rq_stride = BIT(mlx5e_mpwqe_get_log_stride_size(priv->mdev, params, NULL));
>+
>+ err = devlink_fmsg_arr_pair_nest_start(fmsg, "Common config");
>+ if (err)
>+ goto unlock;
>+
>+ err = mlx5e_reporter_named_obj_nest_start(fmsg, "RQ");
>+ if (err)
>+ goto unlock;
>+
>+ err = devlink_fmsg_u8_pair_put(fmsg, "type", params->rq_wq_type);
>+ if (err)
>+ goto unlock;
>+
>+ err = devlink_fmsg_u64_pair_put(fmsg, "stride size", rq_stride);
>+ if (err)
>+ goto unlock;
>+
>+ err = devlink_fmsg_u32_pair_put(fmsg, "size", rq_sz);
>+ if (err)
>+ goto unlock;
>+
>+ err = devlink_fmsg_arr_pair_nest_end(fmsg);
This is odd. I think that you should have
mlx5e_reporter_named_obj_nest_end() called here and
devlink_fmsg_arr_pair_nest_end() after
mlx5e_reporter_cq_common_diagnose()
Misuse of this seems to be a pattern. We need some checker for this
apparently.
>+ if (err)
>+ goto unlock;
>+
>+ err = mlx5e_reporter_cq_common_diagnose(&generic_rq->cq, fmsg);
>+ if (err)
>+ goto unlock;
>+
>+ err = mlx5e_reporter_named_obj_nest_end(fmsg);
>+ if (err)
>+ goto unlock;
>+
>+ err = devlink_fmsg_arr_pair_nest_start(fmsg, "RQs");
>+ if (err)
>+ goto unlock;
>+
>+ for (i = 0; i < priv->channels.num; i++) {
>+ struct mlx5e_rq *rq = &priv->channels.c[i]->rq;
>+
>+ err = mlx5e_rx_reporter_build_diagnose_output(rq, fmsg);
>+ if (err)
>+ goto unlock;
>+ }
>+ err = devlink_fmsg_arr_pair_nest_end(fmsg);
>+ if (err)
>+ goto unlock;
>+unlock:
>+ mutex_unlock(&priv->state_lock);
>+ return err;
>+}
>+
>+static const struct devlink_health_reporter_ops mlx5_rx_reporter_ops = {
>+ .name = "rx",
>+ .diagnose = mlx5e_rx_reporter_diagnose,
>+};
>+
>+int mlx5e_reporter_rx_create(struct mlx5e_priv *priv)
>+{
>+ struct devlink_health_reporter *reporter;
>+ struct mlx5_core_dev *mdev = priv->mdev;
>+ struct devlink *devlink = priv_to_devlink(mdev);
>+
>+ reporter =
>+ devlink_health_reporter_create(devlink, &mlx5_rx_reporter_ops,
>+ 0, false, priv);
Rather align like this:
reporter = devlink_health_reporter_create(devlink,
&mlx5_rx_reporter_ops,
0, false, priv);
>+ if (IS_ERR(reporter))
>+ netdev_warn(priv->netdev, "Failed to create rx reporter, err = %ld\n",
>+ PTR_ERR(reporter));
>+ else
>+ priv->tx_reporter = reporter;
>+ return PTR_ERR_OR_ZERO(reporter);
Change the flow to:
if (IS_ERR(reporter)) {
netdev_warn(priv->netdev, "Failed to create rx reporter, err = %ld\n",
PTR_ERR(reporter));
return PTR_ERR(reporter);
}
priv->tx_reporter = reporter;
return 0;
>+}
>+
>+void mlx5e_reporter_rx_destroy(struct mlx5e_priv *priv)
>+{
>+ if (!priv->rx_reporter)
>+ return;
>+
>+ devlink_health_reporter_destroy(priv->rx_reporter);
>+}
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
>index 98c925e72706..3922905e909f 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
>@@ -247,26 +247,6 @@ static inline void mlx5e_build_umr_wqe(struct mlx5e_rq *rq,
> ucseg->mkey_mask = cpu_to_be64(MLX5_MKEY_MASK_FREE);
> }
>
>-static u32 mlx5e_rqwq_get_size(struct mlx5e_rq *rq)
>-{
>- switch (rq->wq_type) {
>- case MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ:
>- return mlx5_wq_ll_get_size(&rq->mpwqe.wq);
>- default:
>- return mlx5_wq_cyc_get_size(&rq->wqe.wq);
>- }
>-}
>-
>-static u32 mlx5e_rqwq_get_cur_sz(struct mlx5e_rq *rq)
>-{
>- switch (rq->wq_type) {
>- case MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ:
>- return rq->mpwqe.wq.cur_sz;
>- default:
>- return rq->wqe.wq.cur_sz;
>- }
>-}
>-
> static int mlx5e_rq_alloc_mpwqe_info(struct mlx5e_rq *rq,
> struct mlx5e_channel *c)
> {
>@@ -2320,10 +2300,7 @@ int mlx5e_open_channels(struct mlx5e_priv *priv,
> goto err_close_channels;
> }
>
>- if (priv->tx_reporter)
>- devlink_health_reporter_state_update(priv->tx_reporter,
>- DEVLINK_HEALTH_REPORTER_STATE_HEALTHY);
>-
>+ mlx5e_health_channels_update(priv);
> kvfree(cparam);
> return 0;
>
>@@ -3201,7 +3178,6 @@ static void mlx5e_cleanup_nic_tx(struct mlx5e_priv *priv)
> {
> int tc;
>
>- mlx5e_reporter_tx_destroy(priv);
> for (tc = 0; tc < priv->profile->max_tc; tc++)
> mlx5e_destroy_tis(priv->mdev, priv->tisn[tc]);
> }
>@@ -4985,12 +4961,14 @@ static int mlx5e_nic_init(struct mlx5_core_dev *mdev,
> mlx5_core_err(mdev, "TLS initialization failed, %d\n", err);
> mlx5e_build_nic_netdev(netdev);
> mlx5e_build_tc2txq_maps(priv);
>+ mlx5e_health_create_reporters(priv);
>
> return 0;
> }
>
> static void mlx5e_nic_cleanup(struct mlx5e_priv *priv)
> {
>+ mlx5e_health_destroy_reporters(priv);
> mlx5e_tls_cleanup(priv);
> mlx5e_ipsec_cleanup(priv);
> mlx5e_netdev_cleanup(priv->netdev, priv);
>@@ -5093,7 +5071,6 @@ static int mlx5e_init_nic_tx(struct mlx5e_priv *priv)
> #ifdef CONFIG_MLX5_CORE_EN_DCB
> mlx5e_dcbnl_initialize(priv);
> #endif
>- mlx5e_reporter_tx_create(priv);
> return 0;
> }
>
>--
>1.8.3.1
>
next prev parent reply other threads:[~2019-07-08 14:22 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-07 11:52 [PATCH net-next 00/16] mlx5e devlink health reporters Tariq Toukan
2019-07-07 11:52 ` [PATCH net-next 01/16] Revert "net/mlx5e: Fix mlx5e_tx_reporter_create return value" Tariq Toukan
2019-07-08 11:03 ` Jiri Pirko
2019-07-07 11:52 ` [PATCH net-next 02/16] net/mlx5e: Fix error flow in tx reporter diagnose Tariq Toukan
2019-07-08 11:09 ` Jiri Pirko
2019-07-07 11:52 ` [PATCH net-next 03/16] net/mlx5e: Set tx reporter only on successful creation Tariq Toukan
2019-07-07 11:52 ` [PATCH net-next 04/16] net/mlx5e: TX reporter cleanup Tariq Toukan
2019-07-07 11:52 ` [PATCH net-next 05/16] net/mlx5e: Rename reporter header file Tariq Toukan
2019-07-08 11:11 ` Jiri Pirko
2019-07-07 11:52 ` [PATCH net-next 06/16] net/mlx5e: Change naming convention for reporter's functions Tariq Toukan
2019-07-08 11:29 ` Jiri Pirko
2019-07-07 11:52 ` [PATCH net-next 07/16] net/mlx5e: Generalize tx reporter's functionality Tariq Toukan
2019-07-08 12:42 ` Jiri Pirko
2019-07-07 11:53 ` [PATCH net-next 08/16] net/mlx5e: Extend tx diagnose function Tariq Toukan
2019-07-08 12:43 ` Jiri Pirko
2019-07-07 11:53 ` [PATCH net-next 09/16] net/mlx5e: Extend tx reporter diagnostics output Tariq Toukan
2019-07-08 12:55 ` Jiri Pirko
2019-07-08 13:39 ` Jiri Pirko
2019-07-07 11:53 ` [PATCH net-next 10/16] net/mlx5e: Add cq info to tx reporter diagnose Tariq Toukan
2019-07-08 13:00 ` Jiri Pirko
2019-07-07 11:53 ` [PATCH net-next 11/16] net/mlx5e: Add support to rx " Tariq Toukan
2019-07-08 14:22 ` Jiri Pirko [this message]
2019-07-07 11:53 ` [PATCH net-next 12/16] net/mlx5e: Split open/close ICOSQ into stages Tariq Toukan
2019-07-09 7:23 ` Jiri Pirko
2019-07-07 11:53 ` [PATCH net-next 13/16] net/mlx5e: Recover from CQE error on ICOSQ Tariq Toukan
2019-07-09 15:30 ` Jiri Pirko
2019-07-07 11:53 ` [PATCH net-next 14/16] net/mlx5e: Recover from rx timeout Tariq Toukan
2019-07-09 15:32 ` Jiri Pirko
2019-07-07 11:53 ` [PATCH net-next 15/16] net/mlx5e: RX, Handle CQE with error at the earliest stage Tariq Toukan
2019-07-09 15:34 ` Jiri Pirko
2019-07-07 11:53 ` [PATCH net-next 16/16] net/mlx5e: Recover from CQE with error on RQ Tariq Toukan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190708142203.GJ2201@nanopsycho \
--to=jiri@resnulli.us \
--cc=ayal@mellanox.com \
--cc=davem@davemloft.net \
--cc=eranbe@mellanox.com \
--cc=jiri@mellanox.com \
--cc=moshe@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=saeedm@mellanox.com \
--cc=tariqt@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox