From: Saeed Mahameed <saeedm@mellanox.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
Maor Gottlieb <maorg@mellanox.com>, Roi Dayan <roid@mellanox.com>,
Saeed Mahameed <saeedm@mellanox.com>
Subject: [net 1/6] net/mlx5: E-Switch, Fix default encap mode
Date: Thu, 11 Jul 2019 18:54:11 +0000 [thread overview]
Message-ID: <20190711185353.5715-2-saeedm@mellanox.com> (raw)
In-Reply-To: <20190711185353.5715-1-saeedm@mellanox.com>
From: Maor Gottlieb <maorg@mellanox.com>
Encap mode is related to switchdev mode only. Move the init of
the encap mode to eswitch_offloads. Before this change, we reported
that eswitch supports encap, even tough the device was in non
SRIOV mode.
Fixes: 7768d1971de67 ('net/mlx5: E-Switch, Add control for encapsulation')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 5 -----
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 7 +++++++
2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 6a921e24cd5e..e9339e7d6a18 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1882,11 +1882,6 @@ int mlx5_eswitch_init(struct mlx5_core_dev *dev)
esw->enabled_vports = 0;
esw->mode = SRIOV_NONE;
esw->offloads.inline_mode = MLX5_INLINE_MODE_NONE;
- if (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, reformat) &&
- MLX5_CAP_ESW_FLOWTABLE_FDB(dev, decap))
- esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_BASIC;
- else
- esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_NONE;
dev->priv.eswitch = esw;
return 0;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 47b446d30f71..c2beadc41c40 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -1840,6 +1840,12 @@ int esw_offloads_init(struct mlx5_eswitch *esw, int vf_nvports,
{
int err;
+ if (MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, reformat) &&
+ MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, decap))
+ esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_BASIC;
+ else
+ esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_NONE;
+
err = esw_offloads_steering_init(esw, vf_nvports, total_nvports);
if (err)
return err;
@@ -1901,6 +1907,7 @@ void esw_offloads_cleanup(struct mlx5_eswitch *esw)
esw_offloads_devcom_cleanup(esw);
esw_offloads_unload_all_reps(esw, num_vfs);
esw_offloads_steering_cleanup(esw);
+ esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_NONE;
}
static int esw_mode_from_devlink(u16 mode, u16 *mlx5_mode)
--
2.21.0
next prev parent reply other threads:[~2019-07-11 18:54 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-11 18:54 [pull request][net 0/6] Mellanox, mlx5 fixes 2019-07-11 Saeed Mahameed
2019-07-11 18:54 ` Saeed Mahameed [this message]
2019-07-11 18:54 ` [net 2/6] net/mlx5e: Fix port tunnel GRE entropy control Saeed Mahameed
2019-07-11 18:54 ` [net 3/6] net/mlx5e: Rx, Fix checksum calculation for new hardware Saeed Mahameed
2019-07-11 18:54 ` [net 4/6] net/mlx5e: Fix return value from timeout recover function Saeed Mahameed
2019-07-11 18:54 ` [net 5/6] net/mlx5e: Fix error flow in tx reporter diagnose Saeed Mahameed
2019-07-11 18:54 ` [net 6/6] net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn Saeed Mahameed
2019-07-11 22:08 ` [pull request][net 0/6] Mellanox, mlx5 fixes 2019-07-11 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190711185353.5715-2-saeedm@mellanox.com \
--to=saeedm@mellanox.com \
--cc=davem@davemloft.net \
--cc=maorg@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=roid@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox