From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Andrew Bowers <andrewx.bowers@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
Sasha Levin <sashal@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 083/105] ixgbe: Check DDM existence in transceiver before access
Date: Mon, 15 Jul 2019 10:28:17 -0400 [thread overview]
Message-ID: <20190715142839.9896-83-sashal@kernel.org> (raw)
In-Reply-To: <20190715142839.9896-1-sashal@kernel.org>
From: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
[ Upstream commit 655c91414579d7bb115a4f7898ee726fc18e0984 ]
Some transceivers may comply with SFF-8472 but not implement the Digital
Diagnostic Monitoring (DDM) interface described in it. The existence of
such area is specified by bit 6 of byte 92, set to 1 if implemented.
Currently, due to not checking this bit ixgbe fails trying to read SFP
module's eeprom with the follow message:
ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.
This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom
data was confirmed by Mellanox as correct and present in other Passive
DACs in from other manufacturers.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 ++-
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index c3e7a8191128..f7e68083200c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -3237,7 +3237,8 @@ static int ixgbe_get_module_info(struct net_device *dev,
page_swap = true;
}
- if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) {
+ if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap ||
+ !(addr_mode & IXGBE_SFF_DDM_IMPLEMENTED)) {
/* We have a SFP, but it does not support SFF-8472 */
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index b0cac961df3b..94df1d99be95 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -70,6 +70,7 @@
#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8
#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0
#define IXGBE_SFF_ADDRESSING_MODE 0x4
+#define IXGBE_SFF_DDM_IMPLEMENTED 0x40
#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1
#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8
#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23
--
2.20.1
next prev parent reply other threads:[~2019-07-15 14:33 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-15 14:26 [PATCH AUTOSEL 4.14 001/105] wil6210: fix potential out-of-bounds read Sasha Levin
2019-07-15 14:26 ` [PATCH AUTOSEL 4.14 002/105] ath10k: Do not send probe response template for mesh Sasha Levin
2019-07-15 14:26 ` [PATCH AUTOSEL 4.14 003/105] ath9k: Check for errors when reading SREV register Sasha Levin
2019-07-15 14:26 ` [PATCH AUTOSEL 4.14 004/105] ath6kl: add some bounds checking Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 006/105] ath: DFS JP domain W56 fixed pulse type 3 RADAR detection Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 007/105] batman-adv: fix for leaked TVLV handler Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 014/105] net: stmmac: dwmac1000: Clear unused address entries Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 015/105] net: stmmac: dwmac4/5: " Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 016/105] qed: Set the doorbell address correctly Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 019/105] af_key: fix leaks in key_pol_get_resp and dump_sp Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 020/105] xfrm: Fix xfrm sel prefix length validation Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 022/105] Revert "e1000e: fix cyclic resets at link up with active tx" Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 023/105] e1000e: start network tx queue only when link is up Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 026/105] net: phy: Check against net_device being NULL Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 033/105] net: stmmac: dwmac4: fix flow control issue Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 034/105] net: fec: Do not use netdev messages too early Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 035/105] net: axienet: Fix race condition causing TX hang Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 038/105] net: sfp: add mutex to prevent concurrent state checks Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 039/105] ipset: Fix memory accounting for hash types on resize Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 047/105] bpf: silence warning messages in core Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 051/105] xfrm: fix sa selector validation Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 056/105] vhost_net: disable zerocopy by default Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 059/105] ipsec: select crypto ciphers for xfrm_algo Sasha Levin
2019-07-15 14:27 ` [PATCH AUTOSEL 4.14 060/105] ipvs: defer hook registration to avoid leaks Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 071/105] rtlwifi: rtl8192cu: fix error handle when usb probe failed Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 072/105] mt7601u: do not schedule rx_tasklet when the device has been disconnected Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 074/105] mt7601u: fix possible memory leak when the device is disconnected Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 075/105] ipvs: fix tinfo memory leak in start_sync_thread Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 076/105] ath10k: add missing error handling Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 077/105] ath10k: fix PCIE device wake up failed Sasha Levin
2019-07-15 14:28 ` Sasha Levin [this message]
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 089/105] net: hns3: fix a -Wformat-nonliteral compile warning Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 090/105] net: hns3: add some error checking in hclge_tm module Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 091/105] ath10k: destroy sdio workqueue while remove sdio module Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 092/105] iwlwifi: mvm: Drop large non sta frames Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 094/105] net: usb: asix: init MAC address buffers Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 097/105] Bluetooth: 6lowpan: search for destination address in all peers Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 098/105] Bluetooth: Check state in l2cap_disconnect_rsp Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 099/105] gtp: add missing gtp_encap_disable_sock() in gtp_encap_enable() Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 100/105] Bluetooth: validate BLE connection interval updates Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 101/105] gtp: fix suspicious RCU usage Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 102/105] gtp: fix Illegal context switch in RCU read-side critical section Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 103/105] gtp: fix use-after-free in gtp_encap_destroy() Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 104/105] gtp: fix use-after-free in gtp_newlink() Sasha Levin
2019-07-15 14:28 ` [PATCH AUTOSEL 4.14 105/105] net: mvmdio: defer probe of orion-mdio if a clock is not ready Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190715142839.9896-83-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andrewx.bowers@intel.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jesse.brandeburg@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maurosr@linux.vnet.ibm.com \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).