[PATCH v3 05/14] NFC: nxp-nci: Add GPIO ACPI mapping table

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

In order to unify GPIO resource request prepare gpiod_get_index()
to behave correctly when there is no mapping provided by firmware.

Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
---
 drivers/nfc/nxp-nci/i2c.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
index 713c267acf88..7344405feddf 100644
--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -247,6 +247,15 @@ static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id)
 	return IRQ_NONE;
 }
 
+static const struct acpi_gpio_params firmware_gpios = { 1, 0, false };
+static const struct acpi_gpio_params enable_gpios = { 2, 0, false };
+
+static const struct acpi_gpio_mapping acpi_nxp_nci_gpios[] = {
+	{ "enable-gpios", &enable_gpios, 1 },
+	{ "firmware-gpios", &firmware_gpios, 1 },
+	{ }
+};
+
 static int nxp_nci_i2c_parse_devtree(struct i2c_client *client)
 {
 	struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client);
@@ -269,9 +278,14 @@ static int nxp_nci_i2c_parse_devtree(struct i2c_client *client)
 static int nxp_nci_i2c_acpi_config(struct nxp_nci_i2c_phy *phy)
 {
 	struct i2c_client *client = phy->i2c_dev;
+	int r;
 
-	phy->gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2, GPIOD_OUT_LOW);
-	phy->gpiod_fw = devm_gpiod_get_index(&client->dev, NULL, 1, GPIOD_OUT_LOW);
+	r = devm_acpi_dev_add_driver_gpios(&client->dev, acpi_nxp_nci_gpios);
+	if (r)
+		return r;
+
+	phy->gpiod_en = devm_gpiod_get(&client->dev, "enable", GPIOD_OUT_LOW);
+	phy->gpiod_fw = devm_gpiod_get(&client->dev, "firmware", GPIOD_OUT_LOW);
 
 	if (IS_ERR(phy->gpiod_en) || IS_ERR(phy->gpiod_fw)) {
 		nfc_err(&client->dev, "No GPIOs\n");
-- 
2.20.1