[net 1/9] net/mlx5: Use reversed order when unregister devices

[Saeed Mahameed <saeedm@mellanox.com>]

From: Mark Zhang <markz@mellanox.com>

When lag is active, which is controlled by the bonded mlx5e netdev, mlx5
interface unregestering must happen in the reverse order where rdma is
unregistered (unloaded) first, to guarantee all references to the lag
context in hardware is removed, then remove mlx5e netdev interface which
will cleanup the lag context from hardware.

Without this fix during destroy of LAG interface, we observed following
errors:
 * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed,
   status bad parameter(0x3), syndrome (0xe4ac33)
 * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed,
   status bad parameter(0x3), syndrome (0xa5aee8).

Fixes: a31208b1e11d ("net/mlx5_core: New init and exit flow for mlx5_core")
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
index 5bb6a26ea267..50862275544e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/dev.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
@@ -213,7 +213,7 @@ void mlx5_unregister_device(struct mlx5_core_dev *dev)
 	struct mlx5_interface *intf;
 
 	mutex_lock(&mlx5_intf_mutex);
-	list_for_each_entry(intf, &intf_list, list)
+	list_for_each_entry_reverse(intf, &intf_list, list)
 		mlx5_remove_device(intf, priv);
 	list_del(&priv->dev_list);
 	mutex_unlock(&mlx5_intf_mutex);
-- 
2.21.0