From: David Ahern <dsahern@kernel.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next 05/15] selftests: Add ipv4 tcp tests to fcnal-test
Date: Thu, 1 Aug 2019 11:56:38 -0700 [thread overview]
Message-ID: <20190801185648.27653-6-dsahern@kernel.org> (raw)
In-Reply-To: <20190801185648.27653-1-dsahern@kernel.org>
From: David Ahern <dsahern@gmail.com>
Add tcp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.tcp_l3mdev_accept set to 0 and 1.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/fcnal-test.sh | 315 +++++++++++++++++++++++++++++-
1 file changed, 314 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 4da510f6d625..f9e2f1464dcd 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -712,6 +712,317 @@ ipv4_ping()
}
################################################################################
+# IPv4 TCP
+
+ipv4_tcp_novrf()
+{
+ local a
+
+ #
+ # server tests
+ #
+ for a in ${NSA_IP} ${NSA_LO_IP}
+ do
+ log_start
+ run_cmd nettest -s &
+ sleep 1
+ run_cmd_nsb nettest -r ${a}
+ log_test_addr ${a} $? 0 "Global server"
+ done
+
+ a=${NSA_IP}
+ log_start
+ run_cmd nettest -s -d ${NSA_DEV} &
+ sleep 1
+ run_cmd_nsb nettest -r ${a}
+ log_test_addr ${a} $? 0 "Device server"
+
+ # verify TCP reset sent and received
+ for a in ${NSA_IP} ${NSA_LO_IP}
+ do
+ log_start
+ show_hint "Should fail 'Connection refused' since there is no server"
+ run_cmd_nsb nettest -r ${a}
+ log_test_addr ${a} $? 1 "No server"
+ done
+
+ #
+ # client
+ #
+ for a in ${NSB_IP} ${NSB_LO_IP}
+ do
+ log_start
+ run_cmd_nsb nettest -s &
+ sleep 1
+ run_cmd nettest -r ${a} -0 ${NSA_IP}
+ log_test_addr ${a} $? 0 "Client"
+
+ log_start
+ run_cmd_nsb nettest -s &
+ sleep 1
+ run_cmd nettest -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 0 "Client, device bind"
+
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd nettest -r ${a}
+ log_test_addr ${a} $? 1 "No server, unbound client"
+
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd nettest -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 1 "No server, device client"
+ done
+
+ #
+ # local address tests
+ #
+ for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1
+ do
+ log_start
+ run_cmd nettest -s &
+ sleep 1
+ run_cmd nettest -r ${a} -0 ${a} -1 ${a}
+ log_test_addr ${a} $? 0 "Global server, local connection"
+ done
+
+ a=${NSA_IP}
+ log_start
+ run_cmd nettest -s -d ${NSA_DEV} &
+ sleep 1
+ run_cmd nettest -r ${a} -0 ${a}
+ log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
+
+ for a in ${NSA_LO_IP} 127.0.0.1
+ do
+ log_start
+ show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
+ run_cmd nettest -s -d ${NSA_DEV} &
+ sleep 1
+ run_cmd nettest -r ${a}
+ log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
+ done
+
+ a=${NSA_IP}
+ log_start
+ run_cmd nettest -s &
+ sleep 1
+ run_cmd nettest -r ${a} -0 ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 0 "Global server, device client, local connection"
+
+ for a in ${NSA_LO_IP} 127.0.0.1
+ do
+ log_start
+ show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
+ run_cmd nettest -s &
+ sleep 1
+ run_cmd nettest -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 1 "Global server, device client, local connection"
+ done
+
+ a=${NSA_IP}
+ log_start
+ run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd nettest -d ${NSA_DEV} -r ${a} -0 ${a}
+ log_test_addr ${a} $? 0 "Device server, device client, local connection"
+
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd nettest -d ${NSA_DEV} -r ${a}
+ log_test_addr ${a} $? 1 "No server, device client, local conn"
+}
+
+ipv4_tcp_vrf()
+{
+ local a
+
+ # disable global server
+ log_subsection "Global server disabled"
+
+ set_sysctl net.ipv4.tcp_l3mdev_accept=0
+
+ #
+ # server tests
+ #
+ for a in ${NSA_IP} ${VRF_IP}
+ do
+ log_start
+ show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
+ run_cmd nettest -s &
+ sleep 1
+ run_cmd_nsb nettest -r ${a}
+ log_test_addr ${a} $? 1 "Global server"
+
+ log_start
+ run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ sleep 1
+ run_cmd_nsb nettest -r ${a}
+ log_test_addr ${a} $? 0 "VRF server"
+
+ log_start
+ run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd_nsb nettest -r ${a}
+ log_test_addr ${a} $? 0 "Device server"
+
+ # verify TCP reset received
+ log_start
+ show_hint "Should fail 'Connection refused' since there is no server"
+ run_cmd_nsb nettest -r ${a}
+ log_test_addr ${a} $? 1 "No server"
+ done
+
+ # local address tests
+ # (${VRF_IP} and 127.0.0.1 both timeout)
+ a=${NSA_IP}
+ log_start
+ show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
+ run_cmd nettest -s &
+ sleep 1
+ run_cmd nettest -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 1 "Global server, local connection"
+
+ #
+ # enable VRF global server
+ #
+ log_subsection "VRF Global server enabled"
+ set_sysctl net.ipv4.tcp_l3mdev_accept=1
+
+ for a in ${NSA_IP} ${VRF_IP}
+ do
+ log_start
+ show_hint "client socket should be bound to VRF"
+ run_cmd nettest -s -2 ${VRF} &
+ sleep 1
+ run_cmd_nsb nettest -r ${a}
+ log_test_addr ${a} $? 0 "Global server"
+
+ log_start
+ show_hint "client socket should be bound to VRF"
+ run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ sleep 1
+ run_cmd_nsb nettest -r ${a}
+ log_test_addr ${a} $? 0 "VRF server"
+
+ # verify TCP reset received
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd_nsb nettest -r ${a}
+ log_test_addr ${a} $? 1 "No server"
+ done
+
+ a=${NSA_IP}
+ log_start
+ show_hint "client socket should be bound to device"
+ run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd_nsb nettest -r ${a}
+ log_test_addr ${a} $? 0 "Device server"
+
+ # local address tests
+ for a in ${NSA_IP} ${VRF_IP}
+ do
+ log_start
+ show_hint "Should fail 'No route to host' since client is not bound to VRF"
+ run_cmd nettest -s -2 ${VRF} &
+ sleep 1
+ run_cmd nettest -r ${a}
+ log_test_addr ${a} $? 1 "Global server, local connection"
+ done
+
+ #
+ # client
+ #
+ for a in ${NSB_IP} ${NSB_LO_IP}
+ do
+ log_start
+ run_cmd_nsb nettest -s &
+ sleep 1
+ run_cmd nettest -r ${a} -d ${VRF}
+ log_test_addr ${a} $? 0 "Client, VRF bind"
+
+ log_start
+ run_cmd_nsb nettest -s &
+ sleep 1
+ run_cmd nettest -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 0 "Client, device bind"
+
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd nettest -r ${a} -d ${VRF}
+ log_test_addr ${a} $? 1 "No server, VRF client"
+
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd nettest -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 1 "No server, device client"
+ done
+
+ for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
+ do
+ log_start
+ run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ sleep 1
+ run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
+ log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
+ done
+
+ a=${NSA_IP}
+ log_start
+ run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ sleep 1
+ run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
+ log_test_addr ${a} $? 0 "VRF server, device client, local connection"
+
+ log_start
+ show_hint "Should fail 'No route to host' since client is out of VRF scope"
+ run_cmd nettest -s -d ${VRF} &
+ sleep 1
+ run_cmd nettest -r ${a}
+ log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
+
+ log_start
+ run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
+ log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
+
+ log_start
+ run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
+ log_test_addr ${a} $? 0 "Device server, device client, local connection"
+}
+
+ipv4_tcp()
+{
+ log_section "IPv4/TCP"
+
+ which nettest >/dev/null
+ if [ $? -ne 0 ]; then
+ log_error "nettest not found; skipping tests"
+ return
+ fi
+
+ log_subsection "No VRF"
+ setup
+
+ # tcp_l3mdev_accept should have no affect without VRF;
+ # run tests with it enabled and disabled to verify
+ log_subsection "tcp_l3mdev_accept disabled"
+ set_sysctl net.ipv4.tcp_l3mdev_accept=0
+ ipv4_tcp_novrf
+ log_subsection "tcp_l3mdev_accept enabled"
+ set_sysctl net.ipv4.tcp_l3mdev_accept=1
+ ipv4_tcp_novrf
+
+ log_subsection "With VRF"
+ setup "yes"
+ ipv4_tcp_vrf
+}
+
+################################################################################
# IPv6
ipv6_ping_novrf()
@@ -1012,7 +1323,7 @@ EOF
################################################################################
# main
-TESTS_IPV4="ipv4_ping"
+TESTS_IPV4="ipv4_ping ipv4_tcp"
TESTS_IPV6="ipv6_ping"
PAUSE_ON_FAIL=no
PAUSE=no
@@ -1052,6 +1363,8 @@ for t in $TESTS
do
case $t in
ipv4_ping|ping) ipv4_ping;;
+ ipv4_tcp|tcp) ipv4_tcp;;
+
ipv6_ping|ping6) ipv6_ping;;
# setup namespaces and config, but do not run any tests
--
2.11.0
next prev parent reply other threads:[~2019-08-01 18:55 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-01 18:56 [PATCH net-next 00/15] net: Add functional tests for L3 and L4 David Ahern
2019-08-01 18:56 ` [PATCH net-next 01/15] selftests: Add nettest David Ahern
2019-08-01 18:56 ` [PATCH net-next 02/15] selftests: Setup for functional tests for fib and socket lookups David Ahern
2019-08-01 18:56 ` [PATCH net-next 03/15] selftests: Add ipv4 ping tests to fcnal-test David Ahern
2019-08-01 18:56 ` [PATCH net-next 04/15] selftests: Add ipv6 " David Ahern
2019-08-01 18:56 ` David Ahern [this message]
2019-08-01 18:56 ` [PATCH net-next 06/15] selftests: Add ipv6 tcp " David Ahern
2019-08-01 18:56 ` [PATCH net-next 07/15] selftests: Add ipv4 udp " David Ahern
2019-08-01 18:56 ` [PATCH net-next 08/15] selftests: Add ipv6 " David Ahern
2019-08-01 18:56 ` [PATCH net-next 09/15] selftests: Add ipv4 address bind " David Ahern
2019-08-01 18:56 ` [PATCH net-next 10/15] selftests: Add ipv6 " David Ahern
2019-08-01 18:56 ` [PATCH net-next 11/15] selftests: Add ipv4 runtime " David Ahern
2019-08-01 18:56 ` [PATCH net-next 12/15] selftests: Add ipv6 " David Ahern
2019-08-01 18:56 ` [PATCH net-next 13/15] selftests: Add ipv4 netfilter " David Ahern
2019-08-01 18:56 ` [PATCH net-next 14/15] selftests: Add ipv6 " David Ahern
2019-08-01 18:56 ` [PATCH net-next 15/15] selftests: Add use case section " David Ahern
2019-08-02 0:19 ` [PATCH net-next 00/15] net: Add functional tests for L3 and L4 Alexei Starovoitov
2019-08-02 4:04 ` David Ahern
2019-08-02 15:14 ` Alexei Starovoitov
2019-08-02 15:59 ` David Ahern
2019-08-02 4:11 ` David Ahern
2019-08-02 15:15 ` Alexei Starovoitov
2019-08-02 16:00 ` David Ahern
2019-08-03 17:42 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190801185648.27653-6-dsahern@kernel.org \
--to=dsahern@kernel.org \
--cc=davem@davemloft.net \
--cc=dsahern@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).