From: David Ahern <dsahern@kernel.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next 06/15] selftests: Add ipv6 tcp tests to fcnal-test
Date: Thu, 1 Aug 2019 11:56:39 -0700 [thread overview]
Message-ID: <20190801185648.27653-7-dsahern@kernel.org> (raw)
In-Reply-To: <20190801185648.27653-1-dsahern@kernel.org>
From: David Ahern <dsahern@gmail.com>
Add IPv6 tcp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.tcp_l3mdev_accept set to 0 and 1.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/fcnal-test.sh | 370 +++++++++++++++++++++++++++++-
1 file changed, 369 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index f9e2f1464dcd..97291c6d17c5 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -1304,6 +1304,373 @@ ipv6_ping()
}
################################################################################
+# IPv6 TCP
+
+ipv6_tcp_novrf()
+{
+ local a
+
+ #
+ # server tests
+ #
+ for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+ do
+ log_start
+ run_cmd nettest -6 -s &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 0 "Global server"
+ done
+
+ # verify TCP reset received
+ for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+ do
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 1 "No server"
+ done
+
+ #
+ # client
+ #
+ for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
+ do
+ log_start
+ run_cmd_nsb nettest -6 -s &
+ sleep 1
+ run_cmd nettest -6 -r ${a}
+ log_test_addr ${a} $? 0 "Client"
+ done
+
+ for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
+ do
+ log_start
+ run_cmd_nsb nettest -6 -s &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 0 "Client, device bind"
+ done
+
+ for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
+ do
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 1 "No server, device client"
+ done
+
+ #
+ # local address tests
+ #
+ for a in ${NSA_IP6} ${NSA_LO_IP6} ::1
+ do
+ log_start
+ run_cmd nettest -6 -s &
+ sleep 1
+ run_cmd nettest -6 -r ${a}
+ log_test_addr ${a} $? 0 "Global server, local connection"
+ done
+
+ a=${NSA_IP6}
+ log_start
+ run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -0 ${a}
+ log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
+
+ for a in ${NSA_LO_IP6} ::1
+ do
+ log_start
+ show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
+ run_cmd nettest -6 -s -d ${NSA_DEV} &
+ sleep 1
+ run_cmd nettest -6 -r ${a}
+ log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
+ done
+
+ a=${NSA_IP6}
+ log_start
+ run_cmd nettest -6 -s &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
+ log_test_addr ${a} $? 0 "Global server, device client, local connection"
+
+ for a in ${NSA_LO_IP6} ::1
+ do
+ log_start
+ show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
+ run_cmd nettest -6 -s &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 1 "Global server, device client, local connection"
+ done
+
+ for a in ${NSA_IP6} ${NSA_LINKIP6}
+ do
+ log_start
+ run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd nettest -6 -d ${NSA_DEV} -r ${a}
+ log_test_addr ${a} $? 0 "Device server, device client, local conn"
+ done
+
+ for a in ${NSA_IP6} ${NSA_LINKIP6}
+ do
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd nettest -6 -d ${NSA_DEV} -r ${a}
+ log_test_addr ${a} $? 1 "No server, device client, local conn"
+ done
+}
+
+ipv6_tcp_vrf()
+{
+ local a
+
+ # disable global server
+ log_subsection "Global server disabled"
+
+ set_sysctl net.ipv4.tcp_l3mdev_accept=0
+
+ #
+ # server tests
+ #
+ for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+ do
+ log_start
+ show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
+ run_cmd nettest -6 -s &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 1 "Global server"
+ done
+
+ for a in ${NSA_IP6} ${VRF_IP6}
+ do
+ log_start
+ run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 0 "VRF server"
+ done
+
+ # link local is always bound to ingress device
+ a=${NSA_LINKIP6}%${NSB_DEV}
+ log_start
+ run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 0 "VRF server"
+
+ for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+ do
+ log_start
+ run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 0 "Device server"
+ done
+
+ # verify TCP reset received
+ for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+ do
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 1 "No server"
+ done
+
+ # local address tests
+ a=${NSA_IP6}
+ log_start
+ show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
+ run_cmd nettest -6 -s &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 1 "Global server, local connection"
+
+ #
+ # enable VRF global server
+ #
+ log_subsection "VRF Global server enabled"
+ set_sysctl net.ipv4.tcp_l3mdev_accept=1
+
+ for a in ${NSA_IP6} ${VRF_IP6}
+ do
+ log_start
+ run_cmd nettest -6 -s -2 ${VRF} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 0 "Global server"
+ done
+
+ for a in ${NSA_IP6} ${VRF_IP6}
+ do
+ log_start
+ run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 0 "VRF server"
+ done
+
+ # For LLA, child socket is bound to device
+ a=${NSA_LINKIP6}%${NSB_DEV}
+ log_start
+ run_cmd nettest -6 -s -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 0 "Global server"
+
+ log_start
+ run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 0 "VRF server"
+
+ for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+ do
+ log_start
+ run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 0 "Device server"
+ done
+
+ # verify TCP reset received
+ for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+ do
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd_nsb nettest -6 -r ${a}
+ log_test_addr ${a} $? 1 "No server"
+ done
+
+ # local address tests
+ for a in ${NSA_IP6} ${VRF_IP6}
+ do
+ log_start
+ show_hint "Fails 'No route to host' since client is not in VRF"
+ run_cmd nettest -6 -s -2 ${VRF} &
+ sleep 1
+ run_cmd nettest -6 -r ${a}
+ log_test_addr ${a} $? 1 "Global server, local connection"
+ done
+
+
+ #
+ # client
+ #
+ for a in ${NSB_IP6} ${NSB_LO_IP6}
+ do
+ log_start
+ run_cmd_nsb nettest -6 -s &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -d ${VRF}
+ log_test_addr ${a} $? 0 "Client, VRF bind"
+ done
+
+ a=${NSB_LINKIP6}
+ log_start
+ show_hint "Fails since VRF device does not allow linklocal addresses"
+ run_cmd_nsb nettest -6 -s &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -d ${VRF}
+ log_test_addr ${a} $? 1 "Client, VRF bind"
+
+ for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}
+ do
+ log_start
+ run_cmd_nsb nettest -6 -s &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 0 "Client, device bind"
+ done
+
+ for a in ${NSB_IP6} ${NSB_LO_IP6}
+ do
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd nettest -6 -r ${a} -d ${VRF}
+ log_test_addr ${a} $? 1 "No server, VRF client"
+ done
+
+ for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}
+ do
+ log_start
+ show_hint "Should fail 'Connection refused'"
+ run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+ log_test_addr ${a} $? 1 "No server, device client"
+ done
+
+ for a in ${NSA_IP6} ${VRF_IP6} ::1
+ do
+ log_start
+ run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
+ log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
+ done
+
+ a=${NSA_IP6}
+ log_start
+ run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
+ log_test_addr ${a} $? 0 "VRF server, device client, local connection"
+
+ a=${NSA_IP6}
+ log_start
+ show_hint "Should fail since unbound client is out of VRF scope"
+ run_cmd nettest -6 -s -d ${VRF} &
+ sleep 1
+ run_cmd nettest -6 -r ${a}
+ log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
+
+ log_start
+ run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
+ log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
+
+ for a in ${NSA_IP6} ${NSA_LINKIP6}
+ do
+ log_start
+ run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ sleep 1
+ run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
+ log_test_addr ${a} $? 0 "Device server, device client, local connection"
+ done
+}
+
+ipv6_tcp()
+{
+ log_section "IPv6/TCP"
+
+ which nettest >/dev/null
+ if [ $? -ne 0 ]; then
+ log_error "nettest not found; skipping tests"
+ return
+ fi
+
+ log_subsection "No VRF"
+ setup
+
+ # tcp_l3mdev_accept should have no affect without VRF;
+ # run tests with it enabled and disabled to verify
+ log_subsection "tcp_l3mdev_accept disabled"
+ set_sysctl net.ipv4.tcp_l3mdev_accept=0
+ ipv6_tcp_novrf
+ log_subsection "tcp_l3mdev_accept enabled"
+ set_sysctl net.ipv4.tcp_l3mdev_accept=1
+ ipv6_tcp_novrf
+
+ log_subsection "With VRF"
+ setup "yes"
+ ipv6_tcp_vrf
+}
+
+################################################################################
# usage
usage()
@@ -1324,7 +1691,7 @@ EOF
# main
TESTS_IPV4="ipv4_ping ipv4_tcp"
-TESTS_IPV6="ipv6_ping"
+TESTS_IPV6="ipv6_ping ipv6_tcp"
PAUSE_ON_FAIL=no
PAUSE=no
@@ -1366,6 +1733,7 @@ do
ipv4_tcp|tcp) ipv4_tcp;;
ipv6_ping|ping6) ipv6_ping;;
+ ipv6_tcp|tcp6) ipv6_tcp;;
# setup namespaces and config, but do not run any tests
setup) setup; exit 0;;
--
2.11.0
next prev parent reply other threads:[~2019-08-01 18:55 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-01 18:56 [PATCH net-next 00/15] net: Add functional tests for L3 and L4 David Ahern
2019-08-01 18:56 ` [PATCH net-next 01/15] selftests: Add nettest David Ahern
2019-08-01 18:56 ` [PATCH net-next 02/15] selftests: Setup for functional tests for fib and socket lookups David Ahern
2019-08-01 18:56 ` [PATCH net-next 03/15] selftests: Add ipv4 ping tests to fcnal-test David Ahern
2019-08-01 18:56 ` [PATCH net-next 04/15] selftests: Add ipv6 " David Ahern
2019-08-01 18:56 ` [PATCH net-next 05/15] selftests: Add ipv4 tcp " David Ahern
2019-08-01 18:56 ` David Ahern [this message]
2019-08-01 18:56 ` [PATCH net-next 07/15] selftests: Add ipv4 udp " David Ahern
2019-08-01 18:56 ` [PATCH net-next 08/15] selftests: Add ipv6 " David Ahern
2019-08-01 18:56 ` [PATCH net-next 09/15] selftests: Add ipv4 address bind " David Ahern
2019-08-01 18:56 ` [PATCH net-next 10/15] selftests: Add ipv6 " David Ahern
2019-08-01 18:56 ` [PATCH net-next 11/15] selftests: Add ipv4 runtime " David Ahern
2019-08-01 18:56 ` [PATCH net-next 12/15] selftests: Add ipv6 " David Ahern
2019-08-01 18:56 ` [PATCH net-next 13/15] selftests: Add ipv4 netfilter " David Ahern
2019-08-01 18:56 ` [PATCH net-next 14/15] selftests: Add ipv6 " David Ahern
2019-08-01 18:56 ` [PATCH net-next 15/15] selftests: Add use case section " David Ahern
2019-08-02 0:19 ` [PATCH net-next 00/15] net: Add functional tests for L3 and L4 Alexei Starovoitov
2019-08-02 4:04 ` David Ahern
2019-08-02 15:14 ` Alexei Starovoitov
2019-08-02 15:59 ` David Ahern
2019-08-02 4:11 ` David Ahern
2019-08-02 15:15 ` Alexei Starovoitov
2019-08-02 16:00 ` David Ahern
2019-08-03 17:42 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190801185648.27653-7-dsahern@kernel.org \
--to=dsahern@kernel.org \
--cc=davem@davemloft.net \
--cc=dsahern@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).