netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* KSZ8863 ethernet PHY support question
@ 2019-09-03 13:59 HOLTZ Matthieu
  2019-09-04 15:44 ` Andrew Lunn
  0 siblings, 1 reply; 2+ messages in thread
From: HOLTZ Matthieu @ 2019-09-03 13:59 UTC (permalink / raw)
  To: netdev@vger.kernel.org; +Cc: matthieu.holtz@gmail.com

Hello,

I’d like to use a switch phy KSZ8863 with an NXP i.mx8mm MPU (new motherboard dev) and a kernel 4.14.x but I am a bit lost regarding the driver support.

Is the Phy supported by the driver under linux/drivers/net/phy/micrel.c and what about the switch configuration, is it implemented in the DSA subsystem ?

KR,
Matthieu H

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-09-04 15:44 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-09-03 13:59 KSZ8863 ethernet PHY support question HOLTZ Matthieu
2019-09-04 15:44 ` Andrew Lunn

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).