[PATCH AUTOSEL 4.14 02/36] s390/bpf: fix lcgr instruction encoding

[PATCH AUTOSEL 4.14 02/36] s390/bpf: fix lcgr instruction encoding

[Sasha Levin]

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit bb2d267c448f4bc3a3389d97c56391cb779178ae ]

"masking, test in bounds 3" fails on s390, because
BPF_ALU64_IMM(BPF_NEG, BPF_REG_2, 0) ignores the top 32 bits of
BPF_REG_2. The reason is that JIT emits lcgfr instead of lcgr.
The associated comment indicates that the code was intended to
emit lcgr in the first place, it's just that the wrong opcode
was used.

Fix by using the correct opcode.

Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/net/bpf_jit_comp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index bc9431aace05d..fcb9e840727cd 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -882,7 +882,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		break;
 	case BPF_ALU64 | BPF_NEG: /* dst = -dst */
 		/* lcgr %dst,%dst */
-		EMIT4(0xb9130000, dst_reg, dst_reg);
+		EMIT4(0xb9030000, dst_reg, dst_reg);
 		break;
 	/*
 	 * BPF_FROM_BE/LE
-- 
2.20.1

[PATCH AUTOSEL 4.14 05/36] s390/bpf: use 32-bit index for tail calls

[Sasha Levin]

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit 91b4db5313a2c793aabc2143efb8ed0cf0fdd097 ]

"p runtime/jit: pass > 32bit index to tail_call" fails when
bpf_jit_enable=1, because the tail call is not executed.

This in turn is because the generated code assumes index is 64-bit,
while it must be 32-bit, and as a result prog array bounds check fails,
while it should pass. Even if bounds check would have passed, the code
that follows uses 64-bit index to compute prog array offset.

Fix by using clrj instead of clgrj for comparing index with array size,
and also by using llgfr for truncating index to 32 bits before using it
to compute prog array offset.

Fixes: 6651ee070b31 ("s390/bpf: implement bpf_tail_call() helper")
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/net/bpf_jit_comp.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index fcb9e840727cd..b8bd841048434 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -1063,8 +1063,8 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		/* llgf %w1,map.max_entries(%b2) */
 		EMIT6_DISP_LH(0xe3000000, 0x0016, REG_W1, REG_0, BPF_REG_2,
 			      offsetof(struct bpf_array, map.max_entries));
-		/* clgrj %b3,%w1,0xa,label0: if %b3 >= %w1 goto out */
-		EMIT6_PCREL_LABEL(0xec000000, 0x0065, BPF_REG_3,
+		/* clrj %b3,%w1,0xa,label0: if (u32)%b3 >= (u32)%w1 goto out */
+		EMIT6_PCREL_LABEL(0xec000000, 0x0077, BPF_REG_3,
 				  REG_W1, 0, 0xa);
 
 		/*
@@ -1090,8 +1090,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		 *         goto out;
 		 */
 
-		/* sllg %r1,%b3,3: %r1 = index * 8 */
-		EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, BPF_REG_3, REG_0, 3);
+		/* llgfr %r1,%b3: %r1 = (u32) index */
+		EMIT4(0xb9160000, REG_1, BPF_REG_3);
+		/* sllg %r1,%r1,3: %r1 *= 8 */
+		EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, REG_1, REG_0, 3);
 		/* lg %r1,prog(%b2,%r1) */
 		EMIT6_DISP_LH(0xe3000000, 0x0004, REG_1, BPF_REG_2,
 			      REG_1, offsetof(struct bpf_array, ptrs));
-- 
2.20.1

[PATCH AUTOSEL 4.14 06/36] batman-adv: fix uninit-value in batadv_netlink_get_ifindex()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 3ee1bb7aae97324ec9078da1f00cb2176919563f ]

batadv_netlink_get_ifindex() needs to make sure user passed
a correct u32 attribute.

syzbot reported :
BUG: KMSAN: uninit-value in batadv_netlink_dump_hardif+0x70d/0x880 net/batman-adv/netlink.c:968
CPU: 1 PID: 11705 Comm: syz-executor888 Not tainted 5.1.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x191/0x1f0 lib/dump_stack.c:113
 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
 batadv_netlink_dump_hardif+0x70d/0x880 net/batman-adv/netlink.c:968
 genl_lock_dumpit+0xc6/0x130 net/netlink/genetlink.c:482
 netlink_dump+0xa84/0x1ab0 net/netlink/af_netlink.c:2253
 __netlink_dump_start+0xa3a/0xb30 net/netlink/af_netlink.c:2361
 genl_family_rcv_msg net/netlink/genetlink.c:550 [inline]
 genl_rcv_msg+0xfc1/0x1a40 net/netlink/genetlink.c:627
 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2486
 genl_rcv+0x63/0x80 net/netlink/genetlink.c:638
 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline]
 netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1337
 netlink_sendmsg+0x127e/0x12f0 net/netlink/af_netlink.c:1926
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg net/socket.c:661 [inline]
 ___sys_sendmsg+0xcc6/0x1200 net/socket.c:2260
 __sys_sendmsg net/socket.c:2298 [inline]
 __do_sys_sendmsg net/socket.c:2307 [inline]
 __se_sys_sendmsg+0x305/0x460 net/socket.c:2305
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2305
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440209

Fixes: b60620cf567b ("batman-adv: netlink: hardif query")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/netlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index ab13b4d587338..edb35bcc046d4 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -110,7 +110,7 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype)
 {
 	struct nlattr *attr = nlmsg_find_attr(nlh, GENL_HDRLEN, attrtype);
 
-	return attr ? nla_get_u32(attr) : 0;
+	return (attr && nla_len(attr) == sizeof(u32)) ? nla_get_u32(attr) : 0;
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.14 08/36] netfilter: xt_nfacct: Fix alignment mismatch in xt_nfacct_match_info

[Sasha Levin]

From: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>

[ Upstream commit 89a26cd4b501e9511d3cd3d22327fc76a75a38b3 ]

When running a 64-bit kernel with a 32-bit iptables binary, the size of
the xt_nfacct_match_info struct diverges.

    kernel: sizeof(struct xt_nfacct_match_info) : 40
    iptables: sizeof(struct xt_nfacct_match_info)) : 36

Trying to append nfacct related rules results in an unhelpful message.
Although it is suggested to look for more information in dmesg, nothing
can be found there.

    # iptables -A <chain> -m nfacct --nfacct-name <acct-object>
    iptables: Invalid argument. Run `dmesg' for more information.

This patch fixes the memory misalignment by enforcing 8-byte alignment
within the struct's first revision. This solution is often used in many
other uapi netfilter headers.

Signed-off-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/netfilter/xt_nfacct.h |  5 ++++
 net/netfilter/xt_nfacct.c                | 36 ++++++++++++++++--------
 2 files changed, 30 insertions(+), 11 deletions(-)

diff --git a/include/uapi/linux/netfilter/xt_nfacct.h b/include/uapi/linux/netfilter/xt_nfacct.h
index 5c8a4d760ee34..b5123ab8d54a8 100644
--- a/include/uapi/linux/netfilter/xt_nfacct.h
+++ b/include/uapi/linux/netfilter/xt_nfacct.h
@@ -11,4 +11,9 @@ struct xt_nfacct_match_info {
 	struct nf_acct	*nfacct;
 };
 
+struct xt_nfacct_match_info_v1 {
+	char		name[NFACCT_NAME_MAX];
+	struct nf_acct	*nfacct __attribute__((aligned(8)));
+};
+
 #endif /* _XT_NFACCT_MATCH_H */
diff --git a/net/netfilter/xt_nfacct.c b/net/netfilter/xt_nfacct.c
index 6f92d25590a85..ea447b437f122 100644
--- a/net/netfilter/xt_nfacct.c
+++ b/net/netfilter/xt_nfacct.c
@@ -55,25 +55,39 @@ nfacct_mt_destroy(const struct xt_mtdtor_param *par)
 	nfnl_acct_put(info->nfacct);
 }
 
-static struct xt_match nfacct_mt_reg __read_mostly = {
-	.name       = "nfacct",
-	.family     = NFPROTO_UNSPEC,
-	.checkentry = nfacct_mt_checkentry,
-	.match      = nfacct_mt,
-	.destroy    = nfacct_mt_destroy,
-	.matchsize  = sizeof(struct xt_nfacct_match_info),
-	.usersize   = offsetof(struct xt_nfacct_match_info, nfacct),
-	.me         = THIS_MODULE,
+static struct xt_match nfacct_mt_reg[] __read_mostly = {
+	{
+		.name       = "nfacct",
+		.revision   = 0,
+		.family     = NFPROTO_UNSPEC,
+		.checkentry = nfacct_mt_checkentry,
+		.match      = nfacct_mt,
+		.destroy    = nfacct_mt_destroy,
+		.matchsize  = sizeof(struct xt_nfacct_match_info),
+		.usersize   = offsetof(struct xt_nfacct_match_info, nfacct),
+		.me         = THIS_MODULE,
+	},
+	{
+		.name       = "nfacct",
+		.revision   = 1,
+		.family     = NFPROTO_UNSPEC,
+		.checkentry = nfacct_mt_checkentry,
+		.match      = nfacct_mt,
+		.destroy    = nfacct_mt_destroy,
+		.matchsize  = sizeof(struct xt_nfacct_match_info_v1),
+		.usersize   = offsetof(struct xt_nfacct_match_info_v1, nfacct),
+		.me         = THIS_MODULE,
+	},
 };
 
 static int __init nfacct_mt_init(void)
 {
-	return xt_register_match(&nfacct_mt_reg);
+	return xt_register_matches(nfacct_mt_reg, ARRAY_SIZE(nfacct_mt_reg));
 }
 
 static void __exit nfacct_mt_exit(void)
 {
-	xt_unregister_match(&nfacct_mt_reg);
+	xt_unregister_matches(nfacct_mt_reg, ARRAY_SIZE(nfacct_mt_reg));
 }
 
 module_init(nfacct_mt_init);
-- 
2.20.1

[PATCH AUTOSEL 4.14 12/36] Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ATM_NICSTAR_USE_IDT77105

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit cd9d4ff9b78fcd0fc4708900ba3e52e71e1a7690 ]

This should be IDT77105, not IDT77015.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index 2e2efa577437e..8c37294f1d1ee 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -200,7 +200,7 @@ config ATM_NICSTAR_USE_SUNI
 	  make the card work).
 
 config ATM_NICSTAR_USE_IDT77105
-	bool "Use IDT77015 PHY driver (25Mbps)"
+	bool "Use IDT77105 PHY driver (25Mbps)"
 	depends on ATM_NICSTAR
 	help
 	  Support for the PHYsical layer chip in ForeRunner LE25 cards. In
-- 
2.20.1

[PATCH AUTOSEL 4.14 13/36] qed: Add cleanup in qed_slowpath_start()

[Sasha Levin]

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit de0e4fd2f07ce3bbdb69dfb8d9426b7227451b69 ]

If qed_mcp_send_drv_version() fails, no cleanup is executed, leading to
memory leaks. To fix this issue, introduce the label 'err4' to perform the
cleanup work before returning the error.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index ecc2d42965260..557332f1f886c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1081,7 +1081,7 @@ static int qed_slowpath_start(struct qed_dev *cdev,
 					      &drv_version);
 		if (rc) {
 			DP_NOTICE(cdev, "Failed sending drv version command\n");
-			return rc;
+			goto err4;
 		}
 	}
 
@@ -1089,6 +1089,8 @@ static int qed_slowpath_start(struct qed_dev *cdev,
 
 	return 0;
 
+err4:
+	qed_ll2_dealloc_if(cdev);
 err3:
 	qed_hw_stop(cdev);
 err2:
-- 
2.20.1

[PATCH AUTOSEL 4.14 15/36] batman-adv: Only read OGM tvlv_len after buffer len check

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit a15d56a60760aa9dbe26343b9a0ac5228f35d445 ]

Multiple batadv_ogm_packet can be stored in an skbuff. The functions
batadv_iv_ogm_send_to_if()/batadv_iv_ogm_receive() use
batadv_iv_ogm_aggr_packet() to check if there is another additional
batadv_ogm_packet in the skb or not before they continue processing the
packet.

The length for such an OGM is BATADV_OGM_HLEN +
batadv_ogm_packet->tvlv_len. The check must first check that at least
BATADV_OGM_HLEN bytes are available before it accesses tvlv_len (which is
part of the header. Otherwise it might try read outside of the currently
available skbuff to get the content of tvlv_len.

Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure")
Reported-by: syzbot+355cab184197dbbfa384@syzkaller.appspotmail.com
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_iv_ogm.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c
index 5bd9b389f8c98..8b3f9441b3a01 100644
--- a/net/batman-adv/bat_iv_ogm.c
+++ b/net/batman-adv/bat_iv_ogm.c
@@ -450,17 +450,23 @@ static u8 batadv_hop_penalty(u8 tq, const struct batadv_priv *bat_priv)
  * batadv_iv_ogm_aggr_packet - checks if there is another OGM attached
  * @buff_pos: current position in the skb
  * @packet_len: total length of the skb
- * @tvlv_len: tvlv length of the previously considered OGM
+ * @ogm_packet: potential OGM in buffer
  *
  * Return: true if there is enough space for another OGM, false otherwise.
  */
-static bool batadv_iv_ogm_aggr_packet(int buff_pos, int packet_len,
-				      __be16 tvlv_len)
+static bool
+batadv_iv_ogm_aggr_packet(int buff_pos, int packet_len,
+			  const struct batadv_ogm_packet *ogm_packet)
 {
 	int next_buff_pos = 0;
 
-	next_buff_pos += buff_pos + BATADV_OGM_HLEN;
-	next_buff_pos += ntohs(tvlv_len);
+	/* check if there is enough space for the header */
+	next_buff_pos += buff_pos + sizeof(*ogm_packet);
+	if (next_buff_pos > packet_len)
+		return false;
+
+	/* check if there is enough space for the optional TVLV */
+	next_buff_pos += ntohs(ogm_packet->tvlv_len);
 
 	return (next_buff_pos <= packet_len) &&
 	       (next_buff_pos <= BATADV_MAX_AGGREGATION_BYTES);
@@ -488,7 +494,7 @@ static void batadv_iv_ogm_send_to_if(struct batadv_forw_packet *forw_packet,
 
 	/* adjust all flags and log packets */
 	while (batadv_iv_ogm_aggr_packet(buff_pos, forw_packet->packet_len,
-					 batadv_ogm_packet->tvlv_len)) {
+					 batadv_ogm_packet)) {
 		/* we might have aggregated direct link packets with an
 		 * ordinary base packet
 		 */
@@ -1838,7 +1844,7 @@ static int batadv_iv_ogm_receive(struct sk_buff *skb,
 
 	/* unpack the aggregated packets and process them one by one */
 	while (batadv_iv_ogm_aggr_packet(ogm_offset, skb_headlen(skb),
-					 ogm_packet->tvlv_len)) {
+					 ogm_packet)) {
 		batadv_iv_ogm_process(skb, ogm_offset, if_incoming);
 
 		ogm_offset += BATADV_OGM_HLEN;
-- 
2.20.1

[PATCH AUTOSEL 4.14 16/36] batman-adv: Only read OGM2 tvlv_len after buffer len check

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 0ff0f15a32c093381ad1abc06abe85afb561ab28 ]

Multiple batadv_ogm2_packet can be stored in an skbuff. The functions
batadv_v_ogm_send_to_if() uses batadv_v_ogm_aggr_packet() to check if there
is another additional batadv_ogm2_packet in the skb or not before they
continue processing the packet.

The length for such an OGM2 is BATADV_OGM2_HLEN +
batadv_ogm2_packet->tvlv_len. The check must first check that at least
BATADV_OGM2_HLEN bytes are available before it accesses tvlv_len (which is
part of the header. Otherwise it might try read outside of the currently
available skbuff to get the content of tvlv_len.

Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_v_ogm.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/net/batman-adv/bat_v_ogm.c b/net/batman-adv/bat_v_ogm.c
index 8be61734fc43c..e07f636160b67 100644
--- a/net/batman-adv/bat_v_ogm.c
+++ b/net/batman-adv/bat_v_ogm.c
@@ -642,17 +642,23 @@ batadv_v_ogm_process_per_outif(struct batadv_priv *bat_priv,
  * batadv_v_ogm_aggr_packet - checks if there is another OGM aggregated
  * @buff_pos: current position in the skb
  * @packet_len: total length of the skb
- * @tvlv_len: tvlv length of the previously considered OGM
+ * @ogm2_packet: potential OGM2 in buffer
  *
  * Return: true if there is enough space for another OGM, false otherwise.
  */
-static bool batadv_v_ogm_aggr_packet(int buff_pos, int packet_len,
-				     __be16 tvlv_len)
+static bool
+batadv_v_ogm_aggr_packet(int buff_pos, int packet_len,
+			 const struct batadv_ogm2_packet *ogm2_packet)
 {
 	int next_buff_pos = 0;
 
-	next_buff_pos += buff_pos + BATADV_OGM2_HLEN;
-	next_buff_pos += ntohs(tvlv_len);
+	/* check if there is enough space for the header */
+	next_buff_pos += buff_pos + sizeof(*ogm2_packet);
+	if (next_buff_pos > packet_len)
+		return false;
+
+	/* check if there is enough space for the optional TVLV */
+	next_buff_pos += ntohs(ogm2_packet->tvlv_len);
 
 	return (next_buff_pos <= packet_len) &&
 	       (next_buff_pos <= BATADV_MAX_AGGREGATION_BYTES);
@@ -829,7 +835,7 @@ int batadv_v_ogm_packet_recv(struct sk_buff *skb,
 	ogm_packet = (struct batadv_ogm2_packet *)skb->data;
 
 	while (batadv_v_ogm_aggr_packet(ogm_offset, skb_headlen(skb),
-					ogm_packet->tvlv_len)) {
+					ogm_packet)) {
 		batadv_v_ogm_process(skb, ogm_offset, if_incoming);
 
 		ogm_offset += BATADV_OGM2_HLEN;
-- 
2.20.1

[PATCH AUTOSEL 4.14 17/36] r8152: Set memory to all 0xFFs on failed reg reads

[Sasha Levin]

From: Prashant Malani <pmalani@chromium.org>

[ Upstream commit f53a7ad189594a112167efaf17ea8d0242b5ac00 ]

get_registers() blindly copies the memory written to by the
usb_control_msg() call even if the underlying urb failed.

This could lead to junk register values being read by the driver, since
some indirect callers of get_registers() ignore the return values. One
example is:
  ocp_read_dword() ignores the return value of generic_ocp_read(), which
  calls get_registers().

So, emulate PCI "Master Abort" behavior by setting the buffer to all
0xFFs when usb_control_msg() fails.

This patch is copied from the r8152 driver (v2.12.0) published by
Realtek (www.realtek.com).

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 66beff4d76467..455eec3c46942 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -787,8 +787,11 @@ int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
 	ret = usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0),
 			      RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
 			      value, index, tmp, size, 500);
+	if (ret < 0)
+		memset(data, 0xff, size);
+	else
+		memcpy(data, tmp, size);
 
-	memcpy(data, tmp, size);
 	kfree(tmp);
 
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 4.14 19/36] netfilter: nf_conntrack_ftp: Fix debug output

[Sasha Levin]

From: Thomas Jarosch <thomas.jarosch@intra2net.com>

[ Upstream commit 3a069024d371125227de3ac8fa74223fcf473520 ]

The find_pattern() debug output was printing the 'skip' character.
This can be a NULL-byte and messes up further pr_debug() output.

Output without the fix:
kernel: nf_conntrack_ftp: Pattern matches!
kernel: nf_conntrack_ftp: Skipped up to `<7>nf_conntrack_ftp: find_pattern `PORT': dlen = 8
kernel: nf_conntrack_ftp: find_pattern `EPRT': dlen = 8

Output with the fix:
kernel: nf_conntrack_ftp: Pattern matches!
kernel: nf_conntrack_ftp: Skipped up to 0x0 delimiter!
kernel: nf_conntrack_ftp: Match succeeded!
kernel: nf_conntrack_ftp: conntrack_ftp: match `172,17,0,100,200,207' (20 bytes at 4150681645)
kernel: nf_conntrack_ftp: find_pattern `PORT': dlen = 8

Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_ftp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c
index f0e9a7511e1ac..c236c7d1655d0 100644
--- a/net/netfilter/nf_conntrack_ftp.c
+++ b/net/netfilter/nf_conntrack_ftp.c
@@ -323,7 +323,7 @@ static int find_pattern(const char *data, size_t dlen,
 		i++;
 	}
 
-	pr_debug("Skipped up to `%c'!\n", skip);
+	pr_debug("Skipped up to 0x%hhx delimiter!\n", skip);
 
 	*numoff = i;
 	*numlen = getnum(data + i, dlen - i, cmd, term, numoff);
-- 
2.20.1

[PATCH AUTOSEL 4.14 27/36] sky2: Disable MSI on yet another ASUS boards (P6Xxxx)

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 189308d5823a089b56e2299cd96589507dac7319 ]

A similar workaround for the suspend/resume problem is needed for yet
another ASUS machines, P6X models.  Like the previous fix, the BIOS
doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_*
entries are used instead.

Reported-and-tested-by: SteveM <swm@swm1.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/sky2.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 7b239af6cc040..5046efdad5390 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -4954,6 +4954,13 @@ static const struct dmi_system_id msi_blacklist[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "P6T"),
 		},
 	},
+	{
+		.ident = "ASUS P6X",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "P6X"),
+		},
+	},
 	{}
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 31/36] amd-xgbe: Fix error path in xgbe_mod_init()

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit b6b4dc4c1fa7f1c99398e7dc85758049645e9588 ]

In xgbe_mod_init(), we should do cleanup if some error occurs

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: efbaa828330a ("amd-xgbe: Add support to handle device renaming")
Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-main.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-main.c b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
index e31d9d1fb6a66..e4e632e025d31 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
@@ -487,13 +487,19 @@ static int __init xgbe_mod_init(void)
 
 	ret = xgbe_platform_init();
 	if (ret)
-		return ret;
+		goto err_platform_init;
 
 	ret = xgbe_pci_init();
 	if (ret)
-		return ret;
+		goto err_pci_init;
 
 	return 0;
+
+err_pci_init:
+	xgbe_platform_exit();
+err_platform_init:
+	unregister_netdevice_notifier(&xgbe_netdev_notifier);
+	return ret;
 }
 
 static void __exit xgbe_mod_exit(void)
-- 
2.20.1

[PATCH AUTOSEL 4.14 32/36] net: stmmac: dwmac-rk: Don't fail if phy regulator is absent

[Sasha Levin]

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit 3b25528e1e355c803e73aa326ce657b5606cda73 ]

The devicetree binding lists the phy phy as optional. As such, the
driver should not bail out if it can't find a regulator. Instead it
should just skip the remaining regulator related code and continue
on normally.

Skip the remainder of phy_power_on() if a regulator supply isn't
available. This also gets rid of the bogus return code.

Fixes: 2e12f536635f ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 01787344f6e59..712b5eb3507ab 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1145,10 +1145,8 @@ static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
 	int ret;
 	struct device *dev = &bsp_priv->pdev->dev;
 
-	if (!ldo) {
-		dev_err(dev, "no regulator found\n");
-		return -1;
-	}
+	if (!ldo)
+		return 0;
 
 	if (enable) {
 		ret = regulator_enable(ldo);
-- 
2.20.1

[PATCH AUTOSEL 4.14 36/36] net: seeq: Fix the function used to release some memory in an error handling path

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit e1e54ec7fb55501c33b117c111cb0a045b8eded2 ]

In commit 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv"),
a call to 'get_zeroed_page()' has been turned into a call to
'dma_alloc_coherent()'. Only the remove function has been updated to turn
the corresponding 'free_page()' into 'dma_free_attrs()'.
The error hndling path of the probe function has not been updated.

Fix it now.

Rename the corresponding label to something more in line.

Fixes: 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/seeq/sgiseeq.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/seeq/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c
index 84a42ed97601d..49a18439bea2b 100644
--- a/drivers/net/ethernet/seeq/sgiseeq.c
+++ b/drivers/net/ethernet/seeq/sgiseeq.c
@@ -792,15 +792,16 @@ static int sgiseeq_probe(struct platform_device *pdev)
 		printk(KERN_ERR "Sgiseeq: Cannot register net device, "
 		       "aborting.\n");
 		err = -ENODEV;
-		goto err_out_free_page;
+		goto err_out_free_attrs;
 	}
 
 	printk(KERN_INFO "%s: %s %pM\n", dev->name, sgiseeqstr, dev->dev_addr);
 
 	return 0;
 
-err_out_free_page:
-	free_page((unsigned long) sp->srings);
+err_out_free_attrs:
+	dma_free_attrs(&pdev->dev, sizeof(*sp->srings), sp->srings,
+		       sp->srings_dma, DMA_ATTR_NON_CONSISTENT);
 err_out_free_dev:
 	free_netdev(dev);
 
-- 
2.20.1