Re: [PATCH] net/phy: fix DP83865 10 Mbps HDX loopback disable function

[Andrew Lunn <andrew@lunn.ch>]

On Wed, Sep 18, 2019 at 05:03:40PM +0300, Peter Mamonov wrote:
> According to the DP83865 datasheet "The 10 Mbps HDX loopback can be
> disabled in the expanded memory register 0x1C0.1." The driver erroneously
> used bit 0 instead of bit 1.
> 
> Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
> ---
>  drivers/net/phy/national.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c
> index 2addf1d3f619..4892e785dbf3 100644
> --- a/drivers/net/phy/national.c
> +++ b/drivers/net/phy/national.c
> @@ -110,11 +110,14 @@ static void ns_giga_speed_fallback(struct phy_device *phydev, int mode)
>  
>  static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable)
>  {
> +	u16 lb_dis = 1 << 1;

Hi Peter

Please use the BIT() macro.

> +
>  	if (disable)
> -		ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) | 1);
> +		ns_exp_write(phydev, 0x1c0,
> +			     ns_exp_read(phydev, 0x1c0) | lb_dis);
>  	else
>  		ns_exp_write(phydev, 0x1c0,
> -			     ns_exp_read(phydev, 0x1c0) & 0xfffe);
> +			     ns_exp_read(phydev, 0x1c0) & ~lb_dis);
>  
>  	pr_debug("10BASE-T HDX loopback %s\n",
>  		 (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on");

Isn't this also wrong?

      Andrew