From: Ido Schimmel <idosch@idosch.org>
To: Jesse Hathaway <jesse@mbuki-mvuki.org>
Cc: netdev@vger.kernel.org
Subject: Re: Race condition in route lookup
Date: Thu, 10 Oct 2019 11:31:02 +0300 [thread overview]
Message-ID: <20191010083102.GA1336@splinter> (raw)
In-Reply-To: <CANSNSoV1M9stB7CnUcEhsz3FHi4NV_yrBtpYsZ205+rqnvMbvA@mail.gmail.com>
On Wed, Oct 09, 2019 at 11:00:07AM -0500, Jesse Hathaway wrote:
> We have been experiencing a route lookup race condition on our internet facing
> Linux routers. I have been able to reproduce the issue, but would love more
> help in isolating the cause.
>
> Looking up a route found in the main table returns `*` rather than the directly
> connected interface about once for every 10-20 million requests. From my
> reading of the iproute2 source code an asterisk is indicative of the kernel
> returning and interface index of 0 rather than the correct directly connected
> interface.
>
> This is reproducible with the following bash snippet on 5.4-rc2:
>
> $ cat route-race
> #!/bin/bash
>
> # Generate 50 million individual route gets to feed as batch input to `ip`
> function ip-cmds() {
> route_get='route get 192.168.11.142 from 192.168.180.10 iif vlan180'
> for ((i = 0; i < 50000000; i++)); do
> printf '%s\n' "${route_get}"
> done
>
> }
>
> ip-cmds | ip -d -o -batch - | grep -E 'dev \*' | uniq -c
>
> Example output:
>
> $ ./route-race
> 6 unicast 192.168.11.142 from 192.168.180.10 dev * table main
> \ cache iif vlan180
>
> These routers have multiple routing tables and are ingesting full BGP routing
> tables from multiple ISPs:
>
> $ ip route show table all | wc -l
> 3105543
>
> $ ip route show table main | wc -l
> 54
>
> Please let me know what other information I can provide, thanks in advance,
I think it's working as expected. Here is my theory:
If CPU0 is executing both the route get request and forwarding packets
through the directly connected interface, then the following can happen:
<CPU0, t0> - In process context, per-CPU dst entry cached in the nexthop
is found. Not yet dumped to user space
<Any CPU, t1> - Routes are added / removed, therefore invalidating the
cache by bumping 'net->ipv4.rt_genid'
<CPU0, t2> - In softirq, packet is forwarded through the nexthop. The
cached dst entry is found to be invalid. Therefore, it is replaced by a
newer dst entry. dst_dev_put() is called on old entry which assigns the
blackhole netdev to 'dst->dev'. This netdev has an ifindex of 0 because
it is not registered.
<CPU0, t3> - After softirq finished executing, your route get request
from t0 is resumed and the old dst entry is dumped to user space with
ifindex of 0.
I tested this on my system using your script to generate the route get
requests. I pinned it to the same CPU forwarding packets through the
nexthop. To constantly invalidate the cache I created another script
that simply adds and removes IP addresses from an interface.
If I stop the packet forwarding or the script that invalidates the
cache, then I don't see any '*' answers to my route get requests.
BTW, the blackhole netdev was added in 5.3. I assume (didn't test) that
with older kernel versions you'll see 'lo' instead of '*'.
next prev parent reply other threads:[~2019-10-10 8:31 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 16:00 Race condition in route lookup Jesse Hathaway
2019-10-10 8:31 ` Ido Schimmel [this message]
2019-10-10 8:46 ` Ido Schimmel
2019-10-11 14:36 ` Jesse Hathaway
2019-10-11 15:42 ` Ido Schimmel
2019-10-11 16:09 ` Jesse Hathaway
2019-10-11 17:54 ` Wei Wang
2019-10-11 18:17 ` Ido Schimmel
2019-10-11 18:25 ` Ido Schimmel
2019-10-11 18:47 ` Wei Wang
2019-10-11 18:52 ` Ido Schimmel
2019-10-11 21:01 ` Jesse Hathaway
2019-10-11 21:27 ` David Ahern
2019-10-12 6:56 ` Martin Lau
2019-10-14 0:23 ` Wei Wang
2019-10-14 17:26 ` Martin Lau
2019-10-15 14:45 ` David Ahern
2019-10-15 16:42 ` Wei Wang
2019-10-16 6:35 ` Martin Lau
2019-10-15 14:29 ` Jesse Hathaway
2019-10-15 16:44 ` Wei Wang
2019-10-16 6:39 ` Martin Lau
2019-10-16 16:35 ` Wei Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010083102.GA1336@splinter \
--to=idosch@idosch.org \
--cc=jesse@mbuki-mvuki.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox