From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: netdev@vger.kernel.org, lorenzo.bianconi@redhat.com,
davem@davemloft.net, thomas.petazzoni@bootlin.com,
ilias.apalodimas@linaro.org, matteo.croce@redhat.com,
mw@semihalf.com
Subject: Re: [PATCH v2 net-next 4/8] net: mvneta: sync dma buffers before refilling hw queues
Date: Thu, 10 Oct 2019 11:20:04 +0200 [thread overview]
Message-ID: <20191010092004.GB3784@localhost.localdomain> (raw)
In-Reply-To: <20191010090831.5d6c41f2@carbon>
[-- Attachment #1: Type: text/plain, Size: 2458 bytes --]
> On Thu, 10 Oct 2019 01:18:34 +0200
> Lorenzo Bianconi <lorenzo@kernel.org> wrote:
>
> > mvneta driver can run on not cache coherent devices so it is
> > necessary to sync dma buffers before sending them to the device
> > in order to avoid memory corruption. This patch introduce a performance
> > penalty and it is necessary to introduce a more sophisticated logic
> > in order to avoid dma sync as much as we can
>
> Report with benchmarks here:
> https://github.com/xdp-project/xdp-project/blob/master/areas/arm64/board_espressobin08_bench_xdp.org
Thx a lot Jesper for detailed report, I will include this info in the commit log.
Regards,
Lorenzo
>
> We are testing this on an Espressobin board, and do see a huge
> performance cost associated with this DMA-sync. Regardless we still
> want to get this patch merged, to move forward with XDP support for
> this driver.
>
> We promised each-other (on IRC freenode #xdp) that we will follow-up
> with a solution/mitigation, after this patchset is merged. There are
> several ideas, that likely should get separate upstream review.
>
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
>
> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
>
> > ---
> > drivers/net/ethernet/marvell/mvneta.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
> > index 79a6bac0192b..ba4aa9bbc798 100644
> > --- a/drivers/net/ethernet/marvell/mvneta.c
> > +++ b/drivers/net/ethernet/marvell/mvneta.c
> > @@ -1821,6 +1821,7 @@ static int mvneta_rx_refill(struct mvneta_port *pp,
> > struct mvneta_rx_queue *rxq,
> > gfp_t gfp_mask)
> > {
> > + enum dma_data_direction dma_dir;
> > dma_addr_t phys_addr;
> > struct page *page;
> >
> > @@ -1830,6 +1831,9 @@ static int mvneta_rx_refill(struct mvneta_port *pp,
> > return -ENOMEM;
> >
> > phys_addr = page_pool_get_dma_addr(page) + pp->rx_offset_correction;
> > + dma_dir = page_pool_get_dma_dir(rxq->page_pool);
> > + dma_sync_single_for_device(pp->dev->dev.parent, phys_addr,
> > + MVNETA_MAX_RX_BUF_SIZE, dma_dir);
> > mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq);
> >
> > return 0;
>
>
>
> --
> Best regards,
> Jesper Dangaard Brouer
> MSc.CS, Principal Kernel Engineer at Red Hat
> LinkedIn: http://www.linkedin.com/in/brouer
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2019-10-10 9:20 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 23:18 [PATCH v2 net-next 0/8] add XDP support to mvneta driver Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 1/8] net: mvneta: introduce mvneta_update_stats routine Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 2/8] net: mvneta: introduce page pool API for sw buffer manager Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 3/8] net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine Lorenzo Bianconi
2019-10-10 7:16 ` Ilias Apalodimas
2019-10-10 9:58 ` Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 4/8] net: mvneta: sync dma buffers before refilling hw queues Lorenzo Bianconi
2019-10-10 7:08 ` Jesper Dangaard Brouer
2019-10-10 7:21 ` Ilias Apalodimas
2019-10-10 9:18 ` Lorenzo Bianconi
2019-10-10 9:20 ` Lorenzo Bianconi [this message]
2019-10-09 23:18 ` [PATCH v2 net-next 5/8] net: mvneta: add basic XDP support Lorenzo Bianconi
2019-10-10 8:50 ` Jesper Dangaard Brouer
2019-10-10 9:57 ` Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 6/8] net: mvneta: move header prefetch in mvneta_swbm_rx_frame Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 7/8] net: mvneta: make tx buffer array agnostic Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 8/8] net: mvneta: add XDP_TX support Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010092004.GB3784@localhost.localdomain \
--to=lorenzo@kernel.org \
--cc=brouer@redhat.com \
--cc=davem@davemloft.net \
--cc=ilias.apalodimas@linaro.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=matteo.croce@redhat.com \
--cc=mw@semihalf.com \
--cc=netdev@vger.kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).