[PATCH AUTOSEL 4.19 001/100] wil6210: fix freeing of rx buffers in EDMA mode

[PATCH AUTOSEL 4.19 001/100] wil6210: fix freeing of rx buffers in EDMA mode

[Sasha Levin]

From: Ahmad Masri <amasri@codeaurora.org>

[ Upstream commit 6470f31927b46846d957628b719dcfda05446664 ]

After being associated with some EDMA rx traffic, upon "down" driver
doesn't free all skbs in the rx ring.
Modify wil_move_all_rx_buff_to_free_list to loop on active list of rx
buffers, unmap the physical memory and free the skb.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/txrx_edma.c | 44 +++++++-------------
 1 file changed, 14 insertions(+), 30 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.c b/drivers/net/wireless/ath/wil6210/txrx_edma.c
index 3e7fc2983cbb3..409a6fa8b6c8f 100644
--- a/drivers/net/wireless/ath/wil6210/txrx_edma.c
+++ b/drivers/net/wireless/ath/wil6210/txrx_edma.c
@@ -234,9 +234,10 @@ static int wil_rx_refill_edma(struct wil6210_priv *wil)
 	struct wil_ring *ring = &wil->ring_rx;
 	u32 next_head;
 	int rc = 0;
-	u32 swtail = *ring->edma_rx_swtail.va;
+	ring->swtail = *ring->edma_rx_swtail.va;
 
-	for (; next_head = wil_ring_next_head(ring), (next_head != swtail);
+	for (; next_head = wil_ring_next_head(ring),
+	     (next_head != ring->swtail);
 	     ring->swhead = next_head) {
 		rc = wil_ring_alloc_skb_edma(wil, ring, ring->swhead);
 		if (unlikely(rc)) {
@@ -264,43 +265,26 @@ static void wil_move_all_rx_buff_to_free_list(struct wil6210_priv *wil,
 					      struct wil_ring *ring)
 {
 	struct device *dev = wil_to_dev(wil);
-	u32 next_tail;
-	u32 swhead = (ring->swhead + 1) % ring->size;
+	struct list_head *active = &wil->rx_buff_mgmt.active;
 	dma_addr_t pa;
-	u16 dmalen;
 
-	for (; next_tail = wil_ring_next_tail(ring), (next_tail != swhead);
-	     ring->swtail = next_tail) {
-		struct wil_rx_enhanced_desc dd, *d = &dd;
-		struct wil_rx_enhanced_desc *_d =
-			(struct wil_rx_enhanced_desc *)
-			&ring->va[ring->swtail].rx.enhanced;
-		struct sk_buff *skb;
-		u16 buff_id;
+	while (!list_empty(active)) {
+		struct wil_rx_buff *rx_buff =
+			list_first_entry(active, struct wil_rx_buff, list);
+		struct sk_buff *skb = rx_buff->skb;
 
-		*d = *_d;
-
-		/* Extract the SKB from the rx_buff management array */
-		buff_id = __le16_to_cpu(d->mac.buff_id);
-		if (buff_id >= wil->rx_buff_mgmt.size) {
-			wil_err(wil, "invalid buff_id %d\n", buff_id);
-			continue;
-		}
-		skb = wil->rx_buff_mgmt.buff_arr[buff_id].skb;
-		wil->rx_buff_mgmt.buff_arr[buff_id].skb = NULL;
 		if (unlikely(!skb)) {
-			wil_err(wil, "No Rx skb at buff_id %d\n", buff_id);
+			wil_err(wil, "No Rx skb at buff_id %d\n", rx_buff->id);
 		} else {
-			pa = wil_rx_desc_get_addr_edma(&d->dma);
-			dmalen = le16_to_cpu(d->dma.length);
-			dma_unmap_single(dev, pa, dmalen, DMA_FROM_DEVICE);
-
+			rx_buff->skb = NULL;
+			memcpy(&pa, skb->cb, sizeof(pa));
+			dma_unmap_single(dev, pa, wil->rx_buf_len,
+					 DMA_FROM_DEVICE);
 			kfree_skb(skb);
 		}
 
 		/* Move the buffer from the active to the free list */
-		list_move(&wil->rx_buff_mgmt.buff_arr[buff_id].list,
-			  &wil->rx_buff_mgmt.free);
+		list_move(&rx_buff->list, &wil->rx_buff_mgmt.free);
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 016/100] netfilter: ipset: Make invalid MAC address checks consistent

[Sasha Levin]

From: Stefano Brivio <sbrivio@redhat.com>

[ Upstream commit 29edbc3ebdb0faa934114f14bf12fc0b784d4f1b ]

Set types bitmap:ipmac and hash:ipmac check that MAC addresses
are not all zeroes.

Introduce one missing check, and make the remaining ones
consistent, using is_zero_ether_addr() instead of comparing
against an array containing zeroes.

This was already done for hash:mac sets in commit 26c97c5d8dac
("netfilter: ipset: Use is_zero_ether_addr instead of static and
memcmp").

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipset/ip_set_bitmap_ipmac.c |  3 +++
 net/netfilter/ipset/ip_set_hash_ipmac.c   | 11 ++++-------
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/net/netfilter/ipset/ip_set_bitmap_ipmac.c b/net/netfilter/ipset/ip_set_bitmap_ipmac.c
index 4f01321e793ce..794e0335a8648 100644
--- a/net/netfilter/ipset/ip_set_bitmap_ipmac.c
+++ b/net/netfilter/ipset/ip_set_bitmap_ipmac.c
@@ -235,6 +235,9 @@ bitmap_ipmac_kadt(struct ip_set *set, const struct sk_buff *skb,
 	else
 		ether_addr_copy(e.ether, eth_hdr(skb)->h_dest);
 
+	if (is_zero_ether_addr(e.ether))
+		return -EINVAL;
+
 	return adtfn(set, &e, &ext, &opt->ext, opt->cmdflags);
 }
 
diff --git a/net/netfilter/ipset/ip_set_hash_ipmac.c b/net/netfilter/ipset/ip_set_hash_ipmac.c
index 16ec822e40447..25560ea742d66 100644
--- a/net/netfilter/ipset/ip_set_hash_ipmac.c
+++ b/net/netfilter/ipset/ip_set_hash_ipmac.c
@@ -36,9 +36,6 @@ MODULE_ALIAS("ip_set_hash:ip,mac");
 /* Type specific function prefix */
 #define HTYPE		hash_ipmac
 
-/* Zero valued element is not supported */
-static const unsigned char invalid_ether[ETH_ALEN] = { 0 };
-
 /* IPv4 variant */
 
 /* Member elements */
@@ -104,7 +101,7 @@ hash_ipmac4_kadt(struct ip_set *set, const struct sk_buff *skb,
 	else
 		ether_addr_copy(e.ether, eth_hdr(skb)->h_dest);
 
-	if (ether_addr_equal(e.ether, invalid_ether))
+	if (is_zero_ether_addr(e.ether))
 		return -EINVAL;
 
 	ip4addrptr(skb, opt->flags & IPSET_DIM_ONE_SRC, &e.ip);
@@ -140,7 +137,7 @@ hash_ipmac4_uadt(struct ip_set *set, struct nlattr *tb[],
 	if (ret)
 		return ret;
 	memcpy(e.ether, nla_data(tb[IPSET_ATTR_ETHER]), ETH_ALEN);
-	if (ether_addr_equal(e.ether, invalid_ether))
+	if (is_zero_ether_addr(e.ether))
 		return -IPSET_ERR_HASH_ELEM;
 
 	return adtfn(set, &e, &ext, &ext, flags);
@@ -220,7 +217,7 @@ hash_ipmac6_kadt(struct ip_set *set, const struct sk_buff *skb,
 	else
 		ether_addr_copy(e.ether, eth_hdr(skb)->h_dest);
 
-	if (ether_addr_equal(e.ether, invalid_ether))
+	if (is_zero_ether_addr(e.ether))
 		return -EINVAL;
 
 	ip6addrptr(skb, opt->flags & IPSET_DIM_ONE_SRC, &e.ip.in6);
@@ -260,7 +257,7 @@ hash_ipmac6_uadt(struct ip_set *set, struct nlattr *tb[],
 		return ret;
 
 	memcpy(e.ether, nla_data(tb[IPSET_ATTR_ETHER]), ETH_ALEN);
-	if (ether_addr_equal(e.ether, invalid_ether))
+	if (is_zero_ether_addr(e.ether))
 		return -IPSET_ERR_HASH_ELEM;
 
 	return adtfn(set, &e, &ext, &ext, flags);
-- 
2.20.1

[PATCH AUTOSEL 4.19 022/100] ath10k: assign 'n_cipher_suites = 11' for WCN3990 to enable WPA3

[Sasha Levin]

From: Abhishek Ambure <aambure@codeaurora.org>

[ Upstream commit 7ba31e6e0cdc0cc2e60e1fcbf467f3c95aea948e ]

Hostapd uses CCMP, GCMP & GCMP-256 as 'wpa_pairwise' option to run WPA3.
In WCN3990 firmware cipher suite numbers 9 to 11 are for CCMP,
GCMP & GCMP-256.

To enable CCMP, GCMP & GCMP-256 cipher suites in WCN3990 firmware,
host sets 'n_cipher_suites = 11' while initializing hardware parameters.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5210cffb53440..2791ef2fd716c 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -532,7 +532,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &wcn3990_ops,
 		.decap_align_bytes = 1,
 		.num_peers = TARGET_HL_10_TLV_NUM_PEERS,
-		.n_cipher_suites = 8,
+		.n_cipher_suites = 11,
 		.ast_skid_limit = TARGET_HL_10_TLV_AST_SKID_LIMIT,
 		.num_wds_entries = TARGET_HL_10_TLV_NUM_WDS_ENTRIES,
 		.target_64bit = true,
-- 
2.20.1

[PATCH AUTOSEL 4.19 030/100] samples: bpf: fix: seg fault with NULL pointer arg

[Sasha Levin]

From: "Daniel T. Lee" <danieltimlee@gmail.com>

[ Upstream commit d59dd69d5576d699d7d3f5da0b4738c3a36d0133 ]

When NULL pointer accidentally passed to write_kprobe_events,
due to strlen(NULL), segmentation fault happens.
Changed code returns -1 to deal with this situation.

Bug issued with Smatch, static analysis.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/bpf_load.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/samples/bpf/bpf_load.c b/samples/bpf/bpf_load.c
index 5061a2ec45646..176c04a454dc9 100644
--- a/samples/bpf/bpf_load.c
+++ b/samples/bpf/bpf_load.c
@@ -59,7 +59,9 @@ static int write_kprobe_events(const char *val)
 {
 	int fd, ret, flags;
 
-	if ((val != NULL) && (val[0] == '\0'))
+	if (val == NULL)
+		return -1;
+	else if (val[0] == '\0')
 		flags = O_WRONLY | O_TRUNC;
 	else
 		flags = O_WRONLY | O_APPEND;
-- 
2.20.1

[PATCH AUTOSEL 4.19 037/100] mlxsw: spectrum: Set LAG port collector only when active

[Sasha Levin]

From: Nir Dotan <nird@mellanox.com>

[ Upstream commit 48ebab31d424fbdb8ede8914923bec671a933246 ]

The LAG port collecting (receive) function was mistakenly set when the
port was registered as a LAG member, while it should be set only when
the port collection state is set to true. Set LAG port to collecting
when it is set to distributing, as described in the IEEE link
aggregation standard coupled control mux machine state diagram.

Signed-off-by: Nir Dotan <nird@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlxsw/spectrum.c    | 62 ++++++++++++++-----
 1 file changed, 45 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index ee126bcf7c350..ccd9aca281b37 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -4410,9 +4410,6 @@ static int mlxsw_sp_port_lag_join(struct mlxsw_sp_port *mlxsw_sp_port,
 	err = mlxsw_sp_lag_col_port_add(mlxsw_sp_port, lag_id, port_index);
 	if (err)
 		goto err_col_port_add;
-	err = mlxsw_sp_lag_col_port_enable(mlxsw_sp_port, lag_id);
-	if (err)
-		goto err_col_port_enable;
 
 	mlxsw_core_lag_mapping_set(mlxsw_sp->core, lag_id, port_index,
 				   mlxsw_sp_port->local_port);
@@ -4427,8 +4424,6 @@ static int mlxsw_sp_port_lag_join(struct mlxsw_sp_port *mlxsw_sp_port,
 
 	return 0;
 
-err_col_port_enable:
-	mlxsw_sp_lag_col_port_remove(mlxsw_sp_port, lag_id);
 err_col_port_add:
 	if (!lag->ref_count)
 		mlxsw_sp_lag_destroy(mlxsw_sp, lag_id);
@@ -4447,7 +4442,6 @@ static void mlxsw_sp_port_lag_leave(struct mlxsw_sp_port *mlxsw_sp_port,
 	lag = mlxsw_sp_lag_get(mlxsw_sp, lag_id);
 	WARN_ON(lag->ref_count == 0);
 
-	mlxsw_sp_lag_col_port_disable(mlxsw_sp_port, lag_id);
 	mlxsw_sp_lag_col_port_remove(mlxsw_sp_port, lag_id);
 
 	/* Any VLANs configured on the port are no longer valid */
@@ -4492,21 +4486,56 @@ static int mlxsw_sp_lag_dist_port_remove(struct mlxsw_sp_port *mlxsw_sp_port,
 	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sldr), sldr_pl);
 }
 
-static int mlxsw_sp_port_lag_tx_en_set(struct mlxsw_sp_port *mlxsw_sp_port,
-				       bool lag_tx_enabled)
+static int
+mlxsw_sp_port_lag_col_dist_enable(struct mlxsw_sp_port *mlxsw_sp_port)
 {
-	if (lag_tx_enabled)
-		return mlxsw_sp_lag_dist_port_add(mlxsw_sp_port,
-						  mlxsw_sp_port->lag_id);
-	else
-		return mlxsw_sp_lag_dist_port_remove(mlxsw_sp_port,
-						     mlxsw_sp_port->lag_id);
+	int err;
+
+	err = mlxsw_sp_lag_col_port_enable(mlxsw_sp_port,
+					   mlxsw_sp_port->lag_id);
+	if (err)
+		return err;
+
+	err = mlxsw_sp_lag_dist_port_add(mlxsw_sp_port, mlxsw_sp_port->lag_id);
+	if (err)
+		goto err_dist_port_add;
+
+	return 0;
+
+err_dist_port_add:
+	mlxsw_sp_lag_col_port_disable(mlxsw_sp_port, mlxsw_sp_port->lag_id);
+	return err;
+}
+
+static int
+mlxsw_sp_port_lag_col_dist_disable(struct mlxsw_sp_port *mlxsw_sp_port)
+{
+	int err;
+
+	err = mlxsw_sp_lag_dist_port_remove(mlxsw_sp_port,
+					    mlxsw_sp_port->lag_id);
+	if (err)
+		return err;
+
+	err = mlxsw_sp_lag_col_port_disable(mlxsw_sp_port,
+					    mlxsw_sp_port->lag_id);
+	if (err)
+		goto err_col_port_disable;
+
+	return 0;
+
+err_col_port_disable:
+	mlxsw_sp_lag_dist_port_add(mlxsw_sp_port, mlxsw_sp_port->lag_id);
+	return err;
 }
 
 static int mlxsw_sp_port_lag_changed(struct mlxsw_sp_port *mlxsw_sp_port,
 				     struct netdev_lag_lower_state_info *info)
 {
-	return mlxsw_sp_port_lag_tx_en_set(mlxsw_sp_port, info->tx_enabled);
+	if (info->tx_enabled)
+		return mlxsw_sp_port_lag_col_dist_enable(mlxsw_sp_port);
+	else
+		return mlxsw_sp_port_lag_col_dist_disable(mlxsw_sp_port);
 }
 
 static int mlxsw_sp_port_stp_set(struct mlxsw_sp_port *mlxsw_sp_port,
@@ -4668,8 +4697,7 @@ static int mlxsw_sp_netdevice_port_upper_event(struct net_device *lower_dev,
 				err = mlxsw_sp_port_lag_join(mlxsw_sp_port,
 							     upper_dev);
 			} else {
-				mlxsw_sp_port_lag_tx_en_set(mlxsw_sp_port,
-							    false);
+				mlxsw_sp_port_lag_col_dist_disable(mlxsw_sp_port);
 				mlxsw_sp_port_lag_leave(mlxsw_sp_port,
 							upper_dev);
 			}
-- 
2.20.1

[PATCH AUTOSEL 4.19 038/100] net: stmmac: Fix NAPI poll in TX path when in multi-queue

[Sasha Levin]

From: Jose Abreu <jose.abreu@synopsys.com>

[ Upstream commit 4ccb45857c2c0776d0f72e39768295062c1a0de1 ]

Commit 8fce33317023 introduced the concept of NAPI per-channel and
independent cleaning of TX path.

This is currently breaking performance in some cases. The scenario
happens when all packets are being received in Queue 0 but the TX is
performed in Queue != 0.

Fix this by using different NAPI instances per each TX and RX queue, as
suggested by Florian.

Changes from v2:
	- Only force restart transmission if there are pending packets
Changes from v1:
	- Pass entire ring size to TX clean path (Florian)

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |   5 +-
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 115 ++++++++++--------
 2 files changed, 68 insertions(+), 52 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 63e1064b27a24..e697ecd9b0a64 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -78,11 +78,10 @@ struct stmmac_rx_queue {
 };
 
 struct stmmac_channel {
-	struct napi_struct napi ____cacheline_aligned_in_smp;
+	struct napi_struct rx_napi ____cacheline_aligned_in_smp;
+	struct napi_struct tx_napi ____cacheline_aligned_in_smp;
 	struct stmmac_priv *priv_data;
 	u32 index;
-	int has_rx;
-	int has_tx;
 };
 
 struct stmmac_tc_entry {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0101ebaecf028..ab48d384166bc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -155,7 +155,10 @@ static void stmmac_disable_all_queues(struct stmmac_priv *priv)
 	for (queue = 0; queue < maxq; queue++) {
 		struct stmmac_channel *ch = &priv->channel[queue];
 
-		napi_disable(&ch->napi);
+		if (queue < rx_queues_cnt)
+			napi_disable(&ch->rx_napi);
+		if (queue < tx_queues_cnt)
+			napi_disable(&ch->tx_napi);
 	}
 }
 
@@ -173,7 +176,10 @@ static void stmmac_enable_all_queues(struct stmmac_priv *priv)
 	for (queue = 0; queue < maxq; queue++) {
 		struct stmmac_channel *ch = &priv->channel[queue];
 
-		napi_enable(&ch->napi);
+		if (queue < rx_queues_cnt)
+			napi_enable(&ch->rx_napi);
+		if (queue < tx_queues_cnt)
+			napi_enable(&ch->tx_napi);
 	}
 }
 
@@ -1946,6 +1952,10 @@ static int stmmac_tx_clean(struct stmmac_priv *priv, int budget, u32 queue)
 		mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer));
 	}
 
+	/* We still have pending packets, let's call for a new scheduling */
+	if (tx_q->dirty_tx != tx_q->cur_tx)
+		mod_timer(&tx_q->txtimer, STMMAC_COAL_TIMER(10));
+
 	__netif_tx_unlock_bh(netdev_get_tx_queue(priv->dev, queue));
 
 	return count;
@@ -2036,23 +2046,15 @@ static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan)
 	int status = stmmac_dma_interrupt_status(priv, priv->ioaddr,
 						 &priv->xstats, chan);
 	struct stmmac_channel *ch = &priv->channel[chan];
-	bool needs_work = false;
-
-	if ((status & handle_rx) && ch->has_rx) {
-		needs_work = true;
-	} else {
-		status &= ~handle_rx;
-	}
 
-	if ((status & handle_tx) && ch->has_tx) {
-		needs_work = true;
-	} else {
-		status &= ~handle_tx;
+	if ((status & handle_rx) && (chan < priv->plat->rx_queues_to_use)) {
+		stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
+		napi_schedule_irqoff(&ch->rx_napi);
 	}
 
-	if (needs_work && napi_schedule_prep(&ch->napi)) {
+	if ((status & handle_tx) && (chan < priv->plat->tx_queues_to_use)) {
 		stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
-		__napi_schedule(&ch->napi);
+		napi_schedule_irqoff(&ch->tx_napi);
 	}
 
 	return status;
@@ -2248,8 +2250,14 @@ static void stmmac_tx_timer(struct timer_list *t)
 
 	ch = &priv->channel[tx_q->queue_index];
 
-	if (likely(napi_schedule_prep(&ch->napi)))
-		__napi_schedule(&ch->napi);
+	/*
+	 * If NAPI is already running we can miss some events. Let's rearm
+	 * the timer and try again.
+	 */
+	if (likely(napi_schedule_prep(&ch->tx_napi)))
+		__napi_schedule(&ch->tx_napi);
+	else
+		mod_timer(&tx_q->txtimer, STMMAC_COAL_TIMER(10));
 }
 
 /**
@@ -3506,7 +3514,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			else
 				skb->ip_summed = CHECKSUM_UNNECESSARY;
 
-			napi_gro_receive(&ch->napi, skb);
+			napi_gro_receive(&ch->rx_napi, skb);
 
 			priv->dev->stats.rx_packets++;
 			priv->dev->stats.rx_bytes += frame_len;
@@ -3520,40 +3528,45 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 	return count;
 }
 
-/**
- *  stmmac_poll - stmmac poll method (NAPI)
- *  @napi : pointer to the napi structure.
- *  @budget : maximum number of packets that the current CPU can receive from
- *	      all interfaces.
- *  Description :
- *  To look at the incoming frames and clear the tx resources.
- */
-static int stmmac_napi_poll(struct napi_struct *napi, int budget)
+static int stmmac_napi_poll_rx(struct napi_struct *napi, int budget)
 {
 	struct stmmac_channel *ch =
-		container_of(napi, struct stmmac_channel, napi);
+		container_of(napi, struct stmmac_channel, rx_napi);
 	struct stmmac_priv *priv = ch->priv_data;
-	int work_done, rx_done = 0, tx_done = 0;
 	u32 chan = ch->index;
+	int work_done;
 
 	priv->xstats.napi_poll++;
 
-	if (ch->has_tx)
-		tx_done = stmmac_tx_clean(priv, budget, chan);
-	if (ch->has_rx)
-		rx_done = stmmac_rx(priv, budget, chan);
+	work_done = stmmac_rx(priv, budget, chan);
+	if (work_done < budget && napi_complete_done(napi, work_done))
+		stmmac_enable_dma_irq(priv, priv->ioaddr, chan);
+	return work_done;
+}
 
-	work_done = max(rx_done, tx_done);
-	work_done = min(work_done, budget);
+static int stmmac_napi_poll_tx(struct napi_struct *napi, int budget)
+{
+	struct stmmac_channel *ch =
+		container_of(napi, struct stmmac_channel, tx_napi);
+	struct stmmac_priv *priv = ch->priv_data;
+	struct stmmac_tx_queue *tx_q;
+	u32 chan = ch->index;
+	int work_done;
 
-	if (work_done < budget && napi_complete_done(napi, work_done)) {
-		int stat;
+	priv->xstats.napi_poll++;
+
+	work_done = stmmac_tx_clean(priv, DMA_TX_SIZE, chan);
+	work_done = min(work_done, budget);
 
+	if (work_done < budget && napi_complete_done(napi, work_done))
 		stmmac_enable_dma_irq(priv, priv->ioaddr, chan);
-		stat = stmmac_dma_interrupt_status(priv, priv->ioaddr,
-						   &priv->xstats, chan);
-		if (stat && napi_reschedule(napi))
-			stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
+
+	/* Force transmission restart */
+	tx_q = &priv->tx_queue[chan];
+	if (tx_q->cur_tx != tx_q->dirty_tx) {
+		stmmac_enable_dma_transmission(priv, priv->ioaddr);
+		stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr,
+				       chan);
 	}
 
 	return work_done;
@@ -4376,13 +4389,14 @@ int stmmac_dvr_probe(struct device *device,
 		ch->priv_data = priv;
 		ch->index = queue;
 
-		if (queue < priv->plat->rx_queues_to_use)
-			ch->has_rx = true;
-		if (queue < priv->plat->tx_queues_to_use)
-			ch->has_tx = true;
-
-		netif_napi_add(ndev, &ch->napi, stmmac_napi_poll,
-			       NAPI_POLL_WEIGHT);
+		if (queue < priv->plat->rx_queues_to_use) {
+			netif_napi_add(ndev, &ch->rx_napi, stmmac_napi_poll_rx,
+				       NAPI_POLL_WEIGHT);
+		}
+		if (queue < priv->plat->tx_queues_to_use) {
+			netif_napi_add(ndev, &ch->tx_napi, stmmac_napi_poll_tx,
+				       NAPI_POLL_WEIGHT);
+		}
 	}
 
 	mutex_init(&priv->lock);
@@ -4438,7 +4452,10 @@ int stmmac_dvr_probe(struct device *device,
 	for (queue = 0; queue < maxq; queue++) {
 		struct stmmac_channel *ch = &priv->channel[queue];
 
-		netif_napi_del(&ch->napi);
+		if (queue < priv->plat->rx_queues_to_use)
+			netif_napi_del(&ch->rx_napi);
+		if (queue < priv->plat->tx_queues_to_use)
+			netif_napi_del(&ch->tx_napi);
 	}
 error_hw_init:
 	destroy_workqueue(priv->wq);
-- 
2.20.1

[PATCH AUTOSEL 4.19 046/100] net: dsa: mv88e6xxx: Release lock while requesting IRQ

[Sasha Levin]

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit 342a0ee70acbee97fdeb91349420f8744eb291fb ]

There is no need to hold the register lock while requesting the GPIO
interrupt. By not holding it we can also avoid a false positive
lockdep splat.

Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 703e6bdaf0e1f..d075f0f7a3de8 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -456,10 +456,12 @@ static int mv88e6xxx_g1_irq_setup(struct mv88e6xxx_chip *chip)
 	 */
 	irq_set_lockdep_class(chip->irq, &lock_key, &request_key);
 
+	mutex_unlock(&chip->reg_lock);
 	err = request_threaded_irq(chip->irq, NULL,
 				   mv88e6xxx_g1_irq_thread_fn,
 				   IRQF_ONESHOT,
 				   dev_name(chip->dev), chip);
+	mutex_lock(&chip->reg_lock);
 	if (err)
 		mv88e6xxx_g1_irq_free_common(chip);
 
-- 
2.20.1