[net-next v3 0/5][pull request] 1GbE Intel Wired LAN Driver Updates 2019-10-21

[net-next v3 0/5][pull request] 1GbE Intel Wired LAN Driver Updates 2019-10-21

[Jeff Kirsher]

This series contains updates to e1000e and igc only.

Sasha adds stream control transmission protocol (SCTP) CRC checksum
support for igc.  Also added S0ix support to the e1000e driver.  Then
added multicast support by adding the address list to the MTA table and
providing the option for IPv6 address for igc.  In addition, added
receive checksum support to igc as well.  Lastly, cleaned up some code
that was not fully implemented yet for the VLAN filter table array.

v2: Dropped patch 1 & 2 from the original series.  Patch 1 is being sent
    to 'net' tree as a fix and patch 2 implementation needs to be
    re-worked.  Updated the patch to add support for S0ix to fix the
    reverse Xmas tree issues and made the entry/exit functions void
    since they constantly returned success.  All based on community
    feedback.
v3: Cleaned up patch 4 of the series based on feedback from the
    community.  Cleaned up a stray comma in a code comment and removed
    the 'inline' of a function that would be inlined by the compiler
    anyways.

The following are changes since commit 13faf77185225a1383f6f5a072383771ccfe456b:
  Merge branch 'hns3-next'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 1GbE

Sasha Neftin (5):
  igc: Add SCTP CRC checksumming functionality
  e1000e: Add support for S0ix
  igc: Add set_rx_mode support
  igc: Add Rx checksum support
  igc: Clean up unused shadow_vfta pointer

 drivers/net/ethernet/intel/e1000e/netdev.c   | 182 +++++++++++++++
 drivers/net/ethernet/intel/e1000e/regs.h     |   4 +
 drivers/net/ethernet/intel/igc/igc.h         |   1 -
 drivers/net/ethernet/intel/igc/igc_defines.h |   8 +-
 drivers/net/ethernet/intel/igc/igc_hw.h      |   1 +
 drivers/net/ethernet/intel/igc/igc_mac.c     | 104 +++++++++
 drivers/net/ethernet/intel/igc/igc_mac.h     |   2 +
 drivers/net/ethernet/intel/igc/igc_main.c    | 226 ++++++++++++++++++-
 8 files changed, 525 insertions(+), 3 deletions(-)

-- 
2.21.0

[net-next v3 1/5] igc: Add SCTP CRC checksumming functionality

[Jeff Kirsher]

From: Sasha Neftin <sasha.neftin@intel.com>

Add stream control transmission protocol CRC checksum.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igc/igc_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 63b62d74f961..69e70b297e85 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -4211,6 +4211,7 @@ static int igc_probe(struct pci_dev *pdev,
 
 	/* Add supported features to the features list*/
 	netdev->features |= NETIF_F_HW_CSUM;
+	netdev->features |= NETIF_F_SCTP_CRC;
 
 	/* setup the private structure */
 	err = igc_sw_init(adapter);
-- 
2.21.0

[net-next v3 2/5] e1000e: Add support for S0ix

[Jeff Kirsher]

From: Sasha Neftin <sasha.neftin@intel.com>

Implement flow for S0ix support. Modern SoCs support S0ix low power
states during idle periods, which are sub-states of ACPI S0 that increase
power saving while supporting an instant-on experience for providing
lower latency that ACPI S0. The S0ix states shut off parts of the SoC
when they are not in use, while still maintaning optimal performance.
This patch add support for S0ix started from an Ice Lake platform.

Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 182 +++++++++++++++++++++
 drivers/net/ethernet/intel/e1000e/regs.h   |   4 +
 2 files changed, 186 insertions(+)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index d7d56e42a6aa..42f57ab8fb8e 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6294,6 +6294,174 @@ static void e1000e_flush_lpic(struct pci_dev *pdev)
 	pm_runtime_put_sync(netdev->dev.parent);
 }
 
+/* S0ix implementation */
+static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 mac_data;
+	u16 phy_data;
+
+	/* Disable the periodic inband message,
+	 * don't request PCIe clock in K1 page770_17[10:9] = 10b
+	 */
+	e1e_rphy(hw, HV_PM_CTRL, &phy_data);
+	phy_data &= ~HV_PM_CTRL_K1_CLK_REQ;
+	phy_data |= BIT(10);
+	e1e_wphy(hw, HV_PM_CTRL, phy_data);
+
+	/* Make sure we don't exit K1 every time a new packet arrives
+	 * 772_29[5] = 1 CS_Mode_Stay_In_K1
+	 */
+	e1e_rphy(hw, I217_CGFREG, &phy_data);
+	phy_data |= BIT(5);
+	e1e_wphy(hw, I217_CGFREG, phy_data);
+
+	/* Change the MAC/PHY interface to SMBus
+	 * Force the SMBus in PHY page769_23[0] = 1
+	 * Force the SMBus in MAC CTRL_EXT[11] = 1
+	 */
+	e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
+	phy_data |= CV_SMB_CTRL_FORCE_SMBUS;
+	e1e_wphy(hw, CV_SMB_CTRL, phy_data);
+	mac_data = er32(CTRL_EXT);
+	mac_data |= E1000_CTRL_EXT_FORCE_SMBUS;
+	ew32(CTRL_EXT, mac_data);
+
+	/* DFT control: PHY bit: page769_20[0] = 1
+	 * Gate PPW via EXTCNF_CTRL - set 0x0F00[7] = 1
+	 */
+	e1e_rphy(hw, I82579_DFT_CTRL, &phy_data);
+	phy_data |= BIT(0);
+	e1e_wphy(hw, I82579_DFT_CTRL, phy_data);
+
+	mac_data = er32(EXTCNF_CTRL);
+	mac_data |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+	ew32(EXTCNF_CTRL, mac_data);
+
+	/* Check MAC Tx/Rx packet buffer pointers.
+	 * Reset MAC Tx/Rx packet buffer pointers to suppress any
+	 * pending traffic indication that would prevent power gating.
+	 */
+	mac_data = er32(TDFH);
+	if (mac_data)
+		ew32(TDFH, 0);
+	mac_data = er32(TDFT);
+	if (mac_data)
+		ew32(TDFT, 0);
+	mac_data = er32(TDFHS);
+	if (mac_data)
+		ew32(TDFHS, 0);
+	mac_data = er32(TDFTS);
+	if (mac_data)
+		ew32(TDFTS, 0);
+	mac_data = er32(TDFPC);
+	if (mac_data)
+		ew32(TDFPC, 0);
+	mac_data = er32(RDFH);
+	if (mac_data)
+		ew32(RDFH, 0);
+	mac_data = er32(RDFT);
+	if (mac_data)
+		ew32(RDFT, 0);
+	mac_data = er32(RDFHS);
+	if (mac_data)
+		ew32(RDFHS, 0);
+	mac_data = er32(RDFTS);
+	if (mac_data)
+		ew32(RDFTS, 0);
+	mac_data = er32(RDFPC);
+	if (mac_data)
+		ew32(RDFPC, 0);
+
+	/* Enable the Dynamic Power Gating in the MAC */
+	mac_data = er32(FEXTNVM7);
+	mac_data |= BIT(22);
+	ew32(FEXTNVM7, mac_data);
+
+	/* Disable the time synchronization clock */
+	mac_data = er32(FEXTNVM7);
+	mac_data |= BIT(31);
+	mac_data &= ~BIT(0);
+	ew32(FEXTNVM7, mac_data);
+
+	/* Dynamic Power Gating Enable */
+	mac_data = er32(CTRL_EXT);
+	mac_data |= BIT(3);
+	ew32(CTRL_EXT, mac_data);
+
+	/* Enable the Dynamic Clock Gating in the DMA and MAC */
+	mac_data = er32(CTRL_EXT);
+	mac_data |= E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+	ew32(CTRL_EXT, mac_data);
+
+	/* No MAC DPG gating SLP_S0 in modern standby
+	 * Switch the logic of the lanphypc to use PMC counter
+	 */
+	mac_data = er32(FEXTNVM5);
+	mac_data |= BIT(7);
+	ew32(FEXTNVM5, mac_data);
+}
+
+static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 mac_data;
+	u16 phy_data;
+
+	/* Disable the Dynamic Power Gating in the MAC */
+	mac_data = er32(FEXTNVM7);
+	mac_data &= 0xFFBFFFFF;
+	ew32(FEXTNVM7, mac_data);
+
+	/* Enable the time synchronization clock */
+	mac_data = er32(FEXTNVM7);
+	mac_data |= BIT(0);
+	ew32(FEXTNVM7, mac_data);
+
+	/* Disable Dynamic Power Gating */
+	mac_data = er32(CTRL_EXT);
+	mac_data &= 0xFFFFFFF7;
+	ew32(CTRL_EXT, mac_data);
+
+	/* Disable the Dynamic Clock Gating in the DMA and MAC */
+	mac_data = er32(CTRL_EXT);
+	mac_data &= 0xFFF7FFFF;
+	ew32(CTRL_EXT, mac_data);
+
+	/* Revert the lanphypc logic to use the internal Gbe counter
+	 * and not the PMC counter
+	 */
+	mac_data = er32(FEXTNVM5);
+	mac_data &= 0xFFFFFF7F;
+	ew32(FEXTNVM5, mac_data);
+
+	/* Enable the periodic inband message,
+	 * Request PCIe clock in K1 page770_17[10:9] =01b
+	 */
+	e1e_rphy(hw, HV_PM_CTRL, &phy_data);
+	phy_data &= 0xFBFF;
+	phy_data |= HV_PM_CTRL_K1_CLK_REQ;
+	e1e_wphy(hw, HV_PM_CTRL, phy_data);
+
+	/* Return back configuration
+	 * 772_29[5] = 0 CS_Mode_Stay_In_K1
+	 */
+	e1e_rphy(hw, I217_CGFREG, &phy_data);
+	phy_data &= 0xFFDF;
+	e1e_wphy(hw, I217_CGFREG, phy_data);
+
+	/* Change the MAC/PHY interface to Kumeran
+	 * Unforce the SMBus in PHY page769_23[0] = 0
+	 * Unforce the SMBus in MAC CTRL_EXT[11] = 0
+	 */
+	e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
+	phy_data &= ~CV_SMB_CTRL_FORCE_SMBUS;
+	e1e_wphy(hw, CV_SMB_CTRL, phy_data);
+	mac_data = er32(CTRL_EXT);
+	mac_data &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+	ew32(CTRL_EXT, mac_data);
+}
+
 static int e1000e_pm_freeze(struct device *dev)
 {
 	struct net_device *netdev = dev_get_drvdata(dev);
@@ -6649,7 +6817,10 @@ static int e1000e_pm_thaw(struct device *dev)
 
 static int e1000e_pm_suspend(struct device *dev)
 {
+	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct pci_dev *pdev = to_pci_dev(dev);
+	struct e1000_hw *hw = &adapter->hw;
 	int rc;
 
 	e1000e_flush_lpic(pdev);
@@ -6660,14 +6831,25 @@ static int e1000e_pm_suspend(struct device *dev)
 	if (rc)
 		e1000e_pm_thaw(dev);
 
+	/* Introduce S0ix implementation */
+	if (hw->mac.type >= e1000_pch_cnp)
+		e1000e_s0ix_entry_flow(adapter);
+
 	return rc;
 }
 
 static int e1000e_pm_resume(struct device *dev)
 {
+	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
+	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct pci_dev *pdev = to_pci_dev(dev);
+	struct e1000_hw *hw = &adapter->hw;
 	int rc;
 
+	/* Introduce S0ix implementation */
+	if (hw->mac.type >= e1000_pch_cnp)
+		e1000e_s0ix_exit_flow(adapter);
+
 	rc = __e1000_resume(pdev);
 	if (rc)
 		return rc;
diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h
index 47f5ca793970..df59fd1d660c 100644
--- a/drivers/net/ethernet/intel/e1000e/regs.h
+++ b/drivers/net/ethernet/intel/e1000e/regs.h
@@ -18,6 +18,7 @@
 #define E1000_FEXTNVM	0x00028	/* Future Extended NVM - RW */
 #define E1000_FEXTNVM3	0x0003C	/* Future Extended NVM 3 - RW */
 #define E1000_FEXTNVM4	0x00024	/* Future Extended NVM 4 - RW */
+#define E1000_FEXTNVM5	0x00014	/* Future Extended NVM 5 - RW */
 #define E1000_FEXTNVM6	0x00010	/* Future Extended NVM 6 - RW */
 #define E1000_FEXTNVM7	0x000E4	/* Future Extended NVM 7 - RW */
 #define E1000_FEXTNVM9	0x5BB4	/* Future Extended NVM 9 - RW */
@@ -234,4 +235,7 @@
 #define E1000_RXMTRL	0x0B634	/* Time sync Rx EtherType and Msg Type - RW */
 #define E1000_RXUDP	0x0B638	/* Time Sync Rx UDP Port - RW */
 
+/* PHY registers */
+#define I82579_DFT_CTRL	PHY_REG(769, 20)
+
 #endif
-- 
2.21.0

RE: [net-next v3 2/5] e1000e: Add support for S0ix

[Allan, Bruce W]

> -----Original Message-----
> From: netdev-owner@vger.kernel.org [mailto:netdev-owner@vger.kernel.org]
> On Behalf Of Jeff Kirsher
> Sent: Monday, October 21, 2019 11:02 AM
> To: davem@davemloft.net
> Cc: Neftin, Sasha <sasha.neftin@intel.com>; netdev@vger.kernel.org;
> nhorman@redhat.com; sassmann@redhat.com; Wysocki, Rafael J
> <rafael.j.wysocki@intel.com>; Lifshits, Vitaly <vitaly.lifshits@intel.com>;
> Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>; Brown, Aaron F
> <aaron.f.brown@intel.com>; Kirsher, Jeffrey T <jeffrey.t.kirsher@intel.com>
> Subject: [net-next v3 2/5] e1000e: Add support for S0ix
> 
> From: Sasha Neftin <sasha.neftin@intel.com>
> 
> Implement flow for S0ix support. Modern SoCs support S0ix low power
> states during idle periods, which are sub-states of ACPI S0 that increase
> power saving while supporting an instant-on experience for providing
> lower latency that ACPI S0. The S0ix states shut off parts of the SoC
> when they are not in use, while still maintaning optimal performance.
> This patch add support for S0ix started from an Ice Lake platform.
> 
> Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> ---
>  drivers/net/ethernet/intel/e1000e/netdev.c | 182 +++++++++++++++++++++
>  drivers/net/ethernet/intel/e1000e/regs.h   |   4 +
>  2 files changed, 186 insertions(+)

This patch generates warnings that e1000e_s0ix_entry_flow and e1000e_s0ix_exit_flow
are defined but not used [-Wunused-function] when CONFIG_PM_SLEEP is not defined.

The warnings were called out by Intel's 0-DAY kernel test infrastructure after this patch
was merged into the dev-queue branch of Jeff's next-queue tree, so any fix for the warnings
should include the tag " Reported-by: kbuild test robot <lkp@intel.com>".

Bruce.

[net-next v3 3/5] igc: Add set_rx_mode support

[Jeff Kirsher]

From: Sasha Neftin <sasha.neftin@intel.com>

Add multicast addresses list to the MTA table.
Implement basic Rx mode support.
Add option for IPv6 address settings.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igc/igc_defines.h |   3 +
 drivers/net/ethernet/intel/igc/igc_hw.h      |   1 +
 drivers/net/ethernet/intel/igc/igc_mac.c     | 104 +++++++++++
 drivers/net/ethernet/intel/igc/igc_mac.h     |   2 +
 drivers/net/ethernet/intel/igc/igc_main.c    | 181 +++++++++++++++++++
 5 files changed, 291 insertions(+)

diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h
index f3f2325fe567..03f1aca3f57f 100644
--- a/drivers/net/ethernet/intel/igc/igc_defines.h
+++ b/drivers/net/ethernet/intel/igc/igc_defines.h
@@ -402,4 +402,7 @@
 #define IGC_ADVTXD_TUCMD_L4T_TCP	0x00000800  /* L4 Packet Type of TCP */
 #define IGC_ADVTXD_TUCMD_L4T_SCTP	0x00001000 /* L4 packet TYPE of SCTP */
 
+/* Maximum size of the MTA register table in all supported adapters */
+#define MAX_MTA_REG			128
+
 #endif /* _IGC_DEFINES_H_ */
diff --git a/drivers/net/ethernet/intel/igc/igc_hw.h b/drivers/net/ethernet/intel/igc/igc_hw.h
index abb2d72911ff..20f710645746 100644
--- a/drivers/net/ethernet/intel/igc/igc_hw.h
+++ b/drivers/net/ethernet/intel/igc/igc_hw.h
@@ -91,6 +91,7 @@ struct igc_mac_info {
 	u16 mta_reg_count;
 	u16 uta_reg_count;
 
+	u32 mta_shadow[MAX_MTA_REG];
 	u16 rar_entry_count;
 
 	u8 forced_speed_duplex;
diff --git a/drivers/net/ethernet/intel/igc/igc_mac.c b/drivers/net/ethernet/intel/igc/igc_mac.c
index 5eeb4c8caf4a..12aa6b5fcb5d 100644
--- a/drivers/net/ethernet/intel/igc/igc_mac.c
+++ b/drivers/net/ethernet/intel/igc/igc_mac.c
@@ -784,3 +784,107 @@ bool igc_enable_mng_pass_thru(struct igc_hw *hw)
 out:
 	return ret_val;
 }
+
+/**
+ *  igc_hash_mc_addr - Generate a multicast hash value
+ *  @hw: pointer to the HW structure
+ *  @mc_addr: pointer to a multicast address
+ *
+ *  Generates a multicast address hash value which is used to determine
+ *  the multicast filter table array address and new table value.  See
+ *  igc_mta_set()
+ **/
+static u32 igc_hash_mc_addr(struct igc_hw *hw, u8 *mc_addr)
+{
+	u32 hash_value, hash_mask;
+	u8 bit_shift = 0;
+
+	/* Register count multiplied by bits per register */
+	hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+	/* For a mc_filter_type of 0, bit_shift is the number of left-shifts
+	 * where 0xFF would still fall within the hash mask.
+	 */
+	while (hash_mask >> bit_shift != 0xFF)
+		bit_shift++;
+
+	/* The portion of the address that is used for the hash table
+	 * is determined by the mc_filter_type setting.
+	 * The algorithm is such that there is a total of 8 bits of shifting.
+	 * The bit_shift for a mc_filter_type of 0 represents the number of
+	 * left-shifts where the MSB of mc_addr[5] would still fall within
+	 * the hash_mask.  Case 0 does this exactly.  Since there are a total
+	 * of 8 bits of shifting, then mc_addr[4] will shift right the
+	 * remaining number of bits. Thus 8 - bit_shift.  The rest of the
+	 * cases are a variation of this algorithm...essentially raising the
+	 * number of bits to shift mc_addr[5] left, while still keeping the
+	 * 8-bit shifting total.
+	 *
+	 * For example, given the following Destination MAC Address and an
+	 * MTA register count of 128 (thus a 4096-bit vector and 0xFFF mask),
+	 * we can see that the bit_shift for case 0 is 4.  These are the hash
+	 * values resulting from each mc_filter_type...
+	 * [0] [1] [2] [3] [4] [5]
+	 * 01  AA  00  12  34  56
+	 * LSB                 MSB
+	 *
+	 * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
+	 * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
+	 * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
+	 * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
+	 */
+	switch (hw->mac.mc_filter_type) {
+	default:
+	case 0:
+		break;
+	case 1:
+		bit_shift += 1;
+		break;
+	case 2:
+		bit_shift += 2;
+		break;
+	case 3:
+		bit_shift += 4;
+		break;
+	}
+
+	hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+				  (((u16)mc_addr[5]) << bit_shift)));
+
+	return hash_value;
+}
+
+/**
+ *  igc_update_mc_addr_list - Update Multicast addresses
+ *  @hw: pointer to the HW structure
+ *  @mc_addr_list: array of multicast addresses to program
+ *  @mc_addr_count: number of multicast addresses to program
+ *
+ *  Updates entire Multicast Table Array.
+ *  The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igc_update_mc_addr_list(struct igc_hw *hw,
+			     u8 *mc_addr_list, u32 mc_addr_count)
+{
+	u32 hash_value, hash_bit, hash_reg;
+	int i;
+
+	/* clear mta_shadow */
+	memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+	/* update mta_shadow from mc_addr_list */
+	for (i = 0; (u32)i < mc_addr_count; i++) {
+		hash_value = igc_hash_mc_addr(hw, mc_addr_list);
+
+		hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+		hash_bit = hash_value & 0x1F;
+
+		hw->mac.mta_shadow[hash_reg] |= BIT(hash_bit);
+		mc_addr_list += ETH_ALEN;
+	}
+
+	/* replace the entire MTA table */
+	for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+		array_wr32(IGC_MTA, i, hw->mac.mta_shadow[i]);
+	wrfl();
+}
diff --git a/drivers/net/ethernet/intel/igc/igc_mac.h b/drivers/net/ethernet/intel/igc/igc_mac.h
index 782bc995badc..832cccec87cd 100644
--- a/drivers/net/ethernet/intel/igc/igc_mac.h
+++ b/drivers/net/ethernet/intel/igc/igc_mac.h
@@ -29,6 +29,8 @@ s32 igc_get_speed_and_duplex_copper(struct igc_hw *hw, u16 *speed,
 				    u16 *duplex);
 
 bool igc_enable_mng_pass_thru(struct igc_hw *hw);
+void igc_update_mc_addr_list(struct igc_hw *hw,
+			     u8 *mc_addr_list, u32 mc_addr_count);
 
 enum igc_mng_mode {
 	igc_mng_mode_none = 0,
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 69e70b297e85..7d2f479b57cf 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -795,6 +795,44 @@ static int igc_set_mac(struct net_device *netdev, void *p)
 	return 0;
 }
 
+/**
+ *  igc_write_mc_addr_list - write multicast addresses to MTA
+ *  @netdev: network interface device structure
+ *
+ *  Writes multicast address list to the MTA hash table.
+ *  Returns: -ENOMEM on failure
+ *           0 on no addresses written
+ *           X on writing X addresses to MTA
+ **/
+static int igc_write_mc_addr_list(struct net_device *netdev)
+{
+	struct igc_adapter *adapter = netdev_priv(netdev);
+	struct igc_hw *hw = &adapter->hw;
+	struct netdev_hw_addr *ha;
+	u8  *mta_list;
+	int i;
+
+	if (netdev_mc_empty(netdev)) {
+		/* nothing to program, so clear mc list */
+		igc_update_mc_addr_list(hw, NULL, 0);
+		return 0;
+	}
+
+	mta_list = kcalloc(netdev_mc_count(netdev), 6, GFP_ATOMIC);
+	if (!mta_list)
+		return -ENOMEM;
+
+	/* The shared function expects a packed array of only addresses. */
+	i = 0;
+	netdev_for_each_mc_addr(ha, netdev)
+		memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+
+	igc_update_mc_addr_list(hw, mta_list, i);
+	kfree(mta_list);
+
+	return netdev_mc_count(netdev);
+}
+
 static void igc_tx_ctxtdesc(struct igc_ring *tx_ring,
 			    struct igc_tx_buffer *first,
 			    u32 vlan_macip_lens, u32 type_tucmd,
@@ -2518,6 +2556,110 @@ int igc_del_mac_steering_filter(struct igc_adapter *adapter,
 					IGC_MAC_STATE_QUEUE_STEERING | flags);
 }
 
+/* Add a MAC filter for 'addr' directing matching traffic to 'queue',
+ * 'flags' is used to indicate what kind of match is made, match is by
+ * default for the destination address, if matching by source address
+ * is desired the flag IGC_MAC_STATE_SRC_ADDR can be used.
+ */
+static int igc_add_mac_filter(struct igc_adapter *adapter,
+			      const u8 *addr, const u8 queue)
+{
+	struct igc_hw *hw = &adapter->hw;
+	int rar_entries = hw->mac.rar_entry_count;
+	int i;
+
+	if (is_zero_ether_addr(addr))
+		return -EINVAL;
+
+	/* Search for the first empty entry in the MAC table.
+	 * Do not touch entries at the end of the table reserved for the VF MAC
+	 * addresses.
+	 */
+	for (i = 0; i < rar_entries; i++) {
+		if (!igc_mac_entry_can_be_used(&adapter->mac_table[i],
+					       addr, 0))
+			continue;
+
+		ether_addr_copy(adapter->mac_table[i].addr, addr);
+		adapter->mac_table[i].queue = queue;
+		adapter->mac_table[i].state |= IGC_MAC_STATE_IN_USE;
+
+		igc_rar_set_index(adapter, i);
+		return i;
+	}
+
+	return -ENOSPC;
+}
+
+/* Remove a MAC filter for 'addr' directing matching traffic to
+ * 'queue', 'flags' is used to indicate what kind of match need to be
+ * removed, match is by default for the destination address, if
+ * matching by source address is to be removed the flag
+ * IGC_MAC_STATE_SRC_ADDR can be used.
+ */
+static int igc_del_mac_filter(struct igc_adapter *adapter,
+			      const u8 *addr, const u8 queue)
+{
+	struct igc_hw *hw = &adapter->hw;
+	int rar_entries = hw->mac.rar_entry_count;
+	int i;
+
+	if (is_zero_ether_addr(addr))
+		return -EINVAL;
+
+	/* Search for matching entry in the MAC table based on given address
+	 * and queue. Do not touch entries at the end of the table reserved
+	 * for the VF MAC addresses.
+	 */
+	for (i = 0; i < rar_entries; i++) {
+		if (!(adapter->mac_table[i].state & IGC_MAC_STATE_IN_USE))
+			continue;
+		if (adapter->mac_table[i].state != 0)
+			continue;
+		if (adapter->mac_table[i].queue != queue)
+			continue;
+		if (!ether_addr_equal(adapter->mac_table[i].addr, addr))
+			continue;
+
+		/* When a filter for the default address is "deleted",
+		 * we return it to its initial configuration
+		 */
+		if (adapter->mac_table[i].state & IGC_MAC_STATE_DEFAULT) {
+			adapter->mac_table[i].state =
+				IGC_MAC_STATE_DEFAULT | IGC_MAC_STATE_IN_USE;
+			adapter->mac_table[i].queue = 0;
+		} else {
+			adapter->mac_table[i].state = 0;
+			adapter->mac_table[i].queue = 0;
+			memset(adapter->mac_table[i].addr, 0, ETH_ALEN);
+		}
+
+		igc_rar_set_index(adapter, i);
+		return 0;
+	}
+
+	return -ENOENT;
+}
+
+static int igc_uc_sync(struct net_device *netdev, const unsigned char *addr)
+{
+	struct igc_adapter *adapter = netdev_priv(netdev);
+	int ret;
+
+	ret = igc_add_mac_filter(adapter, addr, adapter->num_rx_queues);
+
+	return min_t(int, ret, 0);
+}
+
+static int igc_uc_unsync(struct net_device *netdev, const unsigned char *addr)
+{
+	struct igc_adapter *adapter = netdev_priv(netdev);
+
+	igc_del_mac_filter(adapter, addr, adapter->num_rx_queues);
+
+	return 0;
+}
+
 /**
  * igc_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
  * @netdev: network interface device structure
@@ -2529,6 +2671,44 @@ int igc_del_mac_steering_filter(struct igc_adapter *adapter,
  */
 static void igc_set_rx_mode(struct net_device *netdev)
 {
+	struct igc_adapter *adapter = netdev_priv(netdev);
+	struct igc_hw *hw = &adapter->hw;
+	u32 rctl = 0, rlpml = MAX_JUMBO_FRAME_SIZE;
+	int count;
+
+	/* Check for Promiscuous and All Multicast modes */
+	if (netdev->flags & IFF_PROMISC) {
+		rctl |= IGC_RCTL_UPE | IGC_RCTL_MPE;
+	} else {
+		if (netdev->flags & IFF_ALLMULTI) {
+			rctl |= IGC_RCTL_MPE;
+		} else {
+			/* Write addresses to the MTA, if the attempt fails
+			 * then we should just turn on promiscuous mode so
+			 * that we can at least receive multicast traffic
+			 */
+			count = igc_write_mc_addr_list(netdev);
+			if (count < 0)
+				rctl |= IGC_RCTL_MPE;
+		}
+	}
+
+	/* Write addresses to available RAR registers, if there is not
+	 * sufficient space to store all the addresses then enable
+	 * unicast promiscuous mode
+	 */
+	if (__dev_uc_sync(netdev, igc_uc_sync, igc_uc_unsync))
+		rctl |= IGC_RCTL_UPE;
+
+	/* update state of unicast and multicast */
+	rctl |= rd32(IGC_RCTL) & ~(IGC_RCTL_UPE | IGC_RCTL_MPE);
+	wr32(IGC_RCTL, rctl);
+
+#if (PAGE_SIZE < 8192)
+	if (adapter->max_frame_size <= IGC_MAX_FRAME_BUILD_SKB)
+		rlpml = IGC_MAX_FRAME_BUILD_SKB;
+#endif
+	wr32(IGC_RLPML, rlpml);
 }
 
 /**
@@ -3982,6 +4162,7 @@ static const struct net_device_ops igc_netdev_ops = {
 	.ndo_open		= igc_open,
 	.ndo_stop		= igc_close,
 	.ndo_start_xmit		= igc_xmit_frame,
+	.ndo_set_rx_mode	= igc_set_rx_mode,
 	.ndo_set_mac_address	= igc_set_mac,
 	.ndo_change_mtu		= igc_change_mtu,
 	.ndo_get_stats		= igc_get_stats,
-- 
2.21.0

[net-next v3 4/5] igc: Add Rx checksum support

[Jeff Kirsher]

From: Sasha Neftin <sasha.neftin@intel.com>

Extend the socket buffer field process and add Rx checksum functionality
Minor: fix indentation with tab instead of spaces.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igc/igc_defines.h |  5 ++-
 drivers/net/ethernet/intel/igc/igc_main.c    | 43 ++++++++++++++++++++
 2 files changed, 47 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h
index 03f1aca3f57f..f3788f0b95b4 100644
--- a/drivers/net/ethernet/intel/igc/igc_defines.h
+++ b/drivers/net/ethernet/intel/igc/igc_defines.h
@@ -282,7 +282,10 @@
 #define IGC_RCTL_BAM		0x00008000 /* broadcast enable */
 
 /* Receive Descriptor bit definitions */
-#define IGC_RXD_STAT_EOP	0x02    /* End of Packet */
+#define IGC_RXD_STAT_EOP	0x02	/* End of Packet */
+#define IGC_RXD_STAT_IXSM	0x04	/* Ignore checksum */
+#define IGC_RXD_STAT_UDPCS	0x10	/* UDP xsum calculated */
+#define IGC_RXD_STAT_TCPCS	0x20	/* TCP xsum calculated */
 
 #define IGC_RXDEXT_STATERR_CE		0x01000000
 #define IGC_RXDEXT_STATERR_SE		0x02000000
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 7d2f479b57cf..a16c657a1506 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -1201,6 +1201,46 @@ static netdev_tx_t igc_xmit_frame(struct sk_buff *skb,
 	return igc_xmit_frame_ring(skb, igc_tx_queue_mapping(adapter, skb));
 }
 
+static void igc_rx_checksum(struct igc_ring *ring,
+			    union igc_adv_rx_desc *rx_desc,
+			    struct sk_buff *skb)
+{
+	skb_checksum_none_assert(skb);
+
+	/* Ignore Checksum bit is set */
+	if (igc_test_staterr(rx_desc, IGC_RXD_STAT_IXSM))
+		return;
+
+	/* Rx checksum disabled via ethtool */
+	if (!(ring->netdev->features & NETIF_F_RXCSUM))
+		return;
+
+	/* TCP/UDP checksum error bit is set */
+	if (igc_test_staterr(rx_desc,
+			     IGC_RXDEXT_STATERR_TCPE |
+			     IGC_RXDEXT_STATERR_IPE)) {
+		/* work around errata with sctp packets where the TCPE aka
+		 * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
+		 * packets (aka let the stack check the crc32c)
+		 */
+		if (!(skb->len == 60 &&
+		      test_bit(IGC_RING_FLAG_RX_SCTP_CSUM, &ring->flags))) {
+			u64_stats_update_begin(&ring->rx_syncp);
+			ring->rx_stats.csum_err++;
+			u64_stats_update_end(&ring->rx_syncp);
+		}
+		/* let the stack verify checksum errors */
+		return;
+	}
+	/* It must be a TCP or UDP packet with a valid checksum */
+	if (igc_test_staterr(rx_desc, IGC_RXD_STAT_TCPCS |
+				      IGC_RXD_STAT_UDPCS))
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	dev_dbg(ring->dev, "cksum success: bits %08X\n",
+		le32_to_cpu(rx_desc->wb.upper.status_error));
+}
+
 static inline void igc_rx_hash(struct igc_ring *ring,
 			       union igc_adv_rx_desc *rx_desc,
 			       struct sk_buff *skb)
@@ -1227,6 +1267,8 @@ static void igc_process_skb_fields(struct igc_ring *rx_ring,
 {
 	igc_rx_hash(rx_ring, rx_desc, skb);
 
+	igc_rx_checksum(rx_ring, rx_desc, skb);
+
 	skb_record_rx_queue(skb, rx_ring->queue_index);
 
 	skb->protocol = eth_type_trans(skb, rx_ring->netdev);
@@ -4391,6 +4433,7 @@ static int igc_probe(struct pci_dev *pdev,
 		goto err_sw_init;
 
 	/* Add supported features to the features list*/
+	netdev->features |= NETIF_F_RXCSUM;
 	netdev->features |= NETIF_F_HW_CSUM;
 	netdev->features |= NETIF_F_SCTP_CRC;
 
-- 
2.21.0

[net-next v3 5/5] igc: Clean up unused shadow_vfta pointer

[Jeff Kirsher]

From: Sasha Neftin <sasha.neftin@intel.com>

VLAN filter table array not implemented yet and shadow_vfta pointer
not used. Clean up the code and remove the unused shadow_vfta pointer.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igc/igc.h      | 1 -
 drivers/net/ethernet/intel/igc/igc_main.c | 1 -
 2 files changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index 7e16345d836e..0868677d43ed 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -411,7 +411,6 @@ struct igc_adapter {
 	u32 tx_hwtstamp_timeouts;
 	u32 tx_hwtstamp_skipped;
 	u32 rx_hwtstamp_cleared;
-	u32 *shadow_vfta;
 
 	u32 rss_queues;
 	u32 rss_indir_tbl_init;
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index a16c657a1506..6e0af464326e 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -4573,7 +4573,6 @@ static void igc_remove(struct pci_dev *pdev)
 	pci_release_mem_regions(pdev);
 
 	kfree(adapter->mac_table);
-	kfree(adapter->shadow_vfta);
 	free_netdev(netdev);
 
 	pci_disable_pcie_error_reporting(pdev);
-- 
2.21.0

Re: [net-next v3 0/5][pull request] 1GbE Intel Wired LAN Driver Updates 2019-10-21

[Jakub Kicinski]

On Mon, 21 Oct 2019 11:01:38 -0700, Jeff Kirsher wrote:
> This series contains updates to e1000e and igc only.
> 
> Sasha adds stream control transmission protocol (SCTP) CRC checksum
> support for igc.  Also added S0ix support to the e1000e driver.  Then
> added multicast support by adding the address list to the MTA table and
> providing the option for IPv6 address for igc.  In addition, added
> receive checksum support to igc as well.  Lastly, cleaned up some code
> that was not fully implemented yet for the VLAN filter table array.
> 
> v2: Dropped patch 1 & 2 from the original series.  Patch 1 is being sent
>     to 'net' tree as a fix and patch 2 implementation needs to be
>     re-worked.  Updated the patch to add support for S0ix to fix the
>     reverse Xmas tree issues and made the entry/exit functions void
>     since they constantly returned success.  All based on community
>     feedback.
> v3: Cleaned up patch 4 of the series based on feedback from the
>     community.  Cleaned up a stray comma in a code comment and removed
>     the 'inline' of a function that would be inlined by the compiler
>     anyways.
> 
> The following are changes since commit 13faf77185225a1383f6f5a072383771ccfe456b:
>   Merge branch 'hns3-next'
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 1GbE

Pulled, thanks!