[PATCH 5.3 036/197] net: mscc: ocelot: add missing of_node_put after calling of_get_child_by_name

[PATCH 5.3 036/197] net: mscc: ocelot: add missing of_node_put after calling of_get_child_by_name

[Greg Kroah-Hartman]

From: Wen Yang <wenyang@linux.alibaba.com>

[ Upstream commit d2c50b1cd94528aea8c8e9abb4cce81590f32cc4 ]

of_node_put needs to be called when the device node which is got
from of_get_child_by_name finished using.
In both cases of success and failure, we need to release 'ports',
so clean up the code using goto.

fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mscc/ocelot_board.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot_board.c b/drivers/net/ethernet/mscc/ocelot_board.c
index 2451d4a96490b..041fb9f38ecaa 100644
--- a/drivers/net/ethernet/mscc/ocelot_board.c
+++ b/drivers/net/ethernet/mscc/ocelot_board.c
@@ -287,13 +287,14 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 			continue;
 
 		phy = of_phy_find_device(phy_node);
+		of_node_put(phy_node);
 		if (!phy)
 			continue;
 
 		err = ocelot_probe_port(ocelot, port, regs, phy);
 		if (err) {
 			of_node_put(portnp);
-			return err;
+			goto out_put_ports;
 		}
 
 		phy_mode = of_get_phy_mode(portnp);
@@ -321,7 +322,8 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 				"invalid phy mode for port%d, (Q)SGMII only\n",
 				port);
 			of_node_put(portnp);
-			return -EINVAL;
+			err = -EINVAL;
+			goto out_put_ports;
 		}
 
 		serdes = devm_of_phy_get(ocelot->dev, portnp, NULL);
@@ -334,7 +336,8 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 					"missing SerDes phys for port%d\n",
 					port);
 
-			goto err_probe_ports;
+			of_node_put(portnp);
+			goto out_put_ports;
 		}
 
 		ocelot->ports[port]->serdes = serdes;
@@ -346,9 +349,8 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 
 	dev_info(&pdev->dev, "Ocelot switch probed\n");
 
-	return 0;
-
-err_probe_ports:
+out_put_ports:
+	of_node_put(ports);
 	return err;
 }
 
-- 
2.20.1

[PATCH 5.3 037/197] net: dsa: rtl8366rb: add missing of_node_put after calling of_get_child_by_name

[Greg Kroah-Hartman]

From: Wen Yang <wenyang@linux.alibaba.com>

[ Upstream commit f32eb9d80470dab05df26b6efd02d653c72e6a11 ]

of_node_put needs to be called when the device node which is got
from of_get_child_by_name finished using.
irq_domain_add_linear() also calls of_node_get() to increase refcount,
so irq_domain will not be affected when it is released.

Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/rtl8366rb.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index a268085ffad28..f5cc8b0a7c74c 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -507,7 +507,8 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 	irq = of_irq_get(intc, 0);
 	if (irq <= 0) {
 		dev_err(smi->dev, "failed to get parent IRQ\n");
-		return irq ? irq : -EINVAL;
+		ret = irq ? irq : -EINVAL;
+		goto out_put_node;
 	}
 
 	/* This clears the IRQ status register */
@@ -515,7 +516,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 			  &val);
 	if (ret) {
 		dev_err(smi->dev, "can't read interrupt status\n");
-		return ret;
+		goto out_put_node;
 	}
 
 	/* Fetch IRQ edge information from the descriptor */
@@ -537,7 +538,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 				 val);
 	if (ret) {
 		dev_err(smi->dev, "could not configure IRQ polarity\n");
-		return ret;
+		goto out_put_node;
 	}
 
 	ret = devm_request_threaded_irq(smi->dev, irq, NULL,
@@ -545,7 +546,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 					"RTL8366RB", smi);
 	if (ret) {
 		dev_err(smi->dev, "unable to request irq: %d\n", ret);
-		return ret;
+		goto out_put_node;
 	}
 	smi->irqdomain = irq_domain_add_linear(intc,
 					       RTL8366RB_NUM_INTERRUPT,
@@ -553,12 +554,15 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 					       smi);
 	if (!smi->irqdomain) {
 		dev_err(smi->dev, "failed to create IRQ domain\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_put_node;
 	}
 	for (i = 0; i < smi->num_ports; i++)
 		irq_set_parent(irq_create_mapping(smi->irqdomain, i), irq);
 
-	return 0;
+out_put_node:
+	of_node_put(intc);
+	return ret;
 }
 
 static int rtl8366rb_set_addr(struct realtek_smi *smi)
-- 
2.20.1

[PATCH 5.3 051/197] lib: textsearch: fix escapes in example code

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 2105b52e30debe7f19f3218598d8ae777dcc6776 ]

This textsearch code example does not need the '\' escapes and they can
be misleading to someone reading the example. Also, gcc and sparse warn
that the "\%d" is an unknown escape sequence.

Fixes: 5968a70d7af5 ("textsearch: fix kernel-doc warnings and add kernel-api section")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/textsearch.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/textsearch.c b/lib/textsearch.c
index 4f16eec5d5544..f68dea8806be2 100644
--- a/lib/textsearch.c
+++ b/lib/textsearch.c
@@ -89,9 +89,9 @@
  *       goto errout;
  *   }
  *
- *   pos = textsearch_find_continuous(conf, \&state, example, strlen(example));
+ *   pos = textsearch_find_continuous(conf, &state, example, strlen(example));
  *   if (pos != UINT_MAX)
- *       panic("Oh my god, dancing chickens at \%d\n", pos);
+ *       panic("Oh my god, dancing chickens at %d\n", pos);
  *
  *   textsearch_destroy(conf);
  */
-- 
2.20.1

[PATCH 5.3 090/197] net: ethernet: broadcom: have drivers select DIMLIB as needed

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit ddc790e92b3afa4e366ffb41818cfcd19015031e ]

NET_VENDOR_BROADCOM is intended to control a kconfig menu only.
It should not have anything to do with code generation.
As such, it should not select DIMLIB for all drivers under
NET_VENDOR_BROADCOM.  Instead each driver that needs DIMLIB should
select it (being the symbols SYSTEMPORT, BNXT, and BCMGENET).

Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907021810220.13058@ramsan.of.borg/

Fixes: 4f75da3666c0 ("linux/dim: Move implementation to .c files")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Tal Gilboa <talgi@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: netdev@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/Kconfig |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -8,7 +8,6 @@ config NET_VENDOR_BROADCOM
 	default y
 	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
 		   SIBYTE_SB1xxx_SOC
-	select DIMLIB
 	---help---
 	  If you have a network (Ethernet) chipset belonging to this class,
 	  say Y.
@@ -69,6 +68,7 @@ config BCMGENET
 	select FIXED_PHY
 	select BCM7XXX_PHY
 	select MDIO_BCM_UNIMAC
+	select DIMLIB
 	help
 	  This driver supports the built-in Ethernet MACs found in the
 	  Broadcom BCM7xxx Set Top Box family chipset.
@@ -188,6 +188,7 @@ config SYSTEMPORT
 	select MII
 	select PHYLIB
 	select FIXED_PHY
+	select DIMLIB
 	help
 	  This driver supports the built-in Ethernet MACs found in the
 	  Broadcom BCM7xxx Set Top Box family chipset using an internal
@@ -200,6 +201,7 @@ config BNXT
 	select LIBCRC32C
 	select NET_DEVLINK
 	select PAGE_POOL
+	select DIMLIB
 	---help---
 	  This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
 	  Ethernet cards.  To compile this driver as a module, choose M here: